Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report IX) : Effect of Titanium on Solidification Crack Resistance(Materials, Metallurgy & Weldability)
スポンサーリンク
概要
- 論文の詳細を見る
The effect of titanium (Ti) addition on the solidification crack susceptibility of commercially available SUS 310S (AISI 310S) was investigated by the Trans-Varestraint test and three practical hot cracking tests. These results indicated that an optimum content of Ti addition was greatly beneficial to the improvement of the cracking resistance of SUS 310S weld metals containing about 0.024%P and 0.002%S, but on the contrary an excess of Ti content was harmful. The beneficial effect of Ti addition was interpreted in terms of the formation of higher melting point microconstituents including Ti.
- 大阪大学の論文
著者
-
MATSUDA Fukuhisa
Osaka University
-
KATAYAMA Seiji
Osaka University
-
ARATA Yoshiaki
Osaka University
-
Matsuda Fukuhisa
Osaka Univ.
関連論文
- Effect of Hydrogen Content on Cold Crack Susceptibility of Various Steels with the Implant Test
- Fractography of Cold Crack of Various Carbon Steels and Alloy Steels by Means of the Implant Test : Studies on Fractography of Welded Zone (IV)
- Contraction Process and RRC Test of Nodular Graphite Cast Iron Weldments : Studies on the Weld Cracking of Nodular Graphite Cast Iron (Report 5)
- Preheating Effect on the Critical Rupture Stress of Nodular Graphite Cast Iron Welds : Study on the Weld Cracking of Nodular Graphite Cast Iron (Report 2)
- Estimation of Cracking Susceptibility of Nodular Graphite Cast Iron by the Implant Test : Study on the Weld Cracking of Nodular Graphite Cast Iron (Report 1)
- Toughness Improvement of the HAZ for Machine Structural Carbon and Low Alloy Steels (Report 4) : Effect of PWHT on the Absorbed Energy of HAZ for Medium, High Carbon Machine Structural Steels(Materials, Metallugy & Weldability)
- New Aspects of Sensitization Behavior in Recent 316 Type Austenitic Stainless SteelsAustenitic Stainless Steels(Materials, Metallurgy & Weldability)
- Microstructural Investigations on Decomposition Behaviour of M-A Constituent and Recovery of Ductility due to PWHT in Simulated HAZ of HSLA Steels(Materials, Metallugy & Weldability)
- Mechanical Properties on Electron Beam Welds of Constructional High Tension Steels (Report V)
- Pulsed GMAW : Spattering in Pulsed CO_2 Welding(Welding Physics, Process & Instrument)
- Metal Transfer Characteristics in Self-shielded Flux Cored Arc Welding for Mild Steel and 50kgf/mm^2 Class Tensile Steel (Report II) : Effects of Some Key Elements in Flux on Metal Transfer and Feasibility of Welding(Welding Physics, Process & Instrument)
- Metal Transfer Characteristics in Self Shielded Flux Cored Arc Welding for Mild Steel and 50kgf/mm^2 Class Tensile Steel (Report I) : Metal Transfer Mode and Feasibility of Welding(Welding Physics, Process & Instrument)
- GMA Welding of 9%Ni-Steel with Similarly Composed Nickel Alloy Wire in Helium Shielding
- Arc Characteristics and Metal Transfer for Flux-Cored Electrode in GMA Welding (Report II)(Welding Physics, Processes & Instruments)
- Arc Characteristics and Metal Transfer with Flux-Cored Electrode in CO_2 Shielding (Report I) : Effect of Geometrical Shape in Wire Cross-section on Metal Transfer in Stainless Steel Wire(Welding Physics, Processes & Instruments)
- Solidification Crack Susceptibility of Aluminum Alloy Weld Metals (Report III) : Effect of Straining Rate on Crack Length in Weld Metal
- Solidification Crack Susceptibility of Aluminum Alloy Weld Metals (Report II) : Effect of Straining Rate on Cracking Threshold in Weld Metal during Solidification
- Solidification Crack Susceptibility of Aluminum Alloy Weld Metals (Report I) : Characteristics of Ductility Curves during Solidification by Means of the Trans-Varestraint Test
- Effect of Solidification Rate on Solidification Structure in Weld Metal
- Additional Note on the Report "Quench Hardening and Cracking in Electron Beam Weld Metal of Carbon and Low Alloy Hardenable Steels"
- Quench Hardening and Cracking in Electron Beam Weld Metal of Carbon and Low Alloy Hardenable Steels
- Quantitative Evaluation of Solidification Brittleness of Weld Metal during Solidification by In-Situ Observation and Measurement (Report II) : Solidification Ductility Curves for Steels with the MISO Technique(Materials, Metallurgy & Weldability)
- Quantitative Evaluation of Solidification Brittleness of Weld Metal during Solidification by Means of In-Situ Observation and Measurement (Report I) : Development of the MISO Technique(Materials, Metallurgy & Weldability)
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report IX) : Effect of Titanium on Solidification Crack Resistance(Materials, Metallurgy & Weldability)
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report VIII) : Effect of Nitrogen on Cracking in SUS 304 Weld Metal(Materials, Metallurgy & Weldability)
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report VII) : Effect of Mn and N on Solidification Crack Resistance(Materials, Metallurgy & Weldability)
- Weld Metal Cracking and Improvements of 25%Cr-20%Ni (AISI 310S) Fully Austenitic Stainless Steel
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report VI) : Effect of La or REM Addition on Solidification Crack Resistance(MATERIALS METALLURGY AND WELDABILITY)
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report V) : Solidification Crack Susceptibility and Amount of Phosphide and Sulphide in SUS 310S Weld Metals
- A New Explanation for Role of Delta-Ferrite Improving Weld Solidification Crack Susceptibility in Austenitic Stainless Steel(Materials, Metallurgy, Weldability)
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report IV) : Effect of Decreasing P and S on Solidification Crack Susceptibility of SUS 310S Austenitic Stainless Steel Weld Metals
- Fractographic Investigation on Solidification Crack in the Varestraint Test of Fully Austenitic Stainless Steel : Studies on Fractography of Welded Zone (III)
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report III) : Effect of Strain Rate on Cracking Threshold in Weld Metal during Solidification
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report II) : Effect of Ferrite, P, S, C, Si and Mn on Ductility Properties of Solidification Brittleness
- Solidification Crack Susceptibility in Weld Metals of Fully Austenitic Stainless Steels (Report I) : Fundamental Investigation on Solidification Behavior of Fully Austenitic and Duplex Microstructures and Effect of Ferrite on Microsegregation
- Effect of Grain Morphology on Consumption of GTA Electrode(Physics, Process, Instruments & Measurements)
- Gas-Tungsten-Electrode (Report 4) : Measurement of Cathode Temperature(Physics, Process, Instrument & Measurement)
- Gas-Tungsten-Electrode (Report 5) : Effect of Combined Additives of Rare Earth Metal Oxides on Arc Characteristics of Tungsten Electrode(Physics, Process, Instrument & Measurement)
- Behavior of Rare Earth Metal Oxides during Arcing(Physics, Process, Instrument & Measurement)
- Direct Observation of Cathode Surface : Gas-Tungsten-Arc Electrode (3)(Physics, Process, Instrument & Measurement)
- Oxidation Behaviour and Rim Formation Mechanism of Tungsten Electrode(Physics, Process, Instrument & Measurement)
- Gas-Tungsten-Arc Cathode and Related Phenomena
- The VDR Cracking Test for Solidification Crack Susceptibility on Weld Metals and Its Application to Aluminum Alloys(Materials, Metallurgy, Weldability)
- Effect of Electromagnetic Stirring on Weld Solidification Structure of Aluminum Alloys (Report I) : Investigation on GTA Weld Metal of Thin Sheet
- Combined Effect of Current Pulsation and Zr Addition on Improvement of Solidification Cracking of Al-Zn-Mg Alloy Weld Metal : Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy (Report IV)(Materials, Metallurgy & We
- Hydrogen Embrittlement of SUS 316 Austenitic Stainless Steel Weldments(Materials, Metallurgy & Weldability)
- Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy (Report III) : Enhancement of Beneficial Effect of Zirconium on Improvement of crack susceptibility by Application of Electromagnetic Stirring(Materials, Metallurgy
- Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy (Report II) : Results of Weld Crater and Bead Cracking Tests(Materials, Metallurgy & Weldability)
- Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy (Report I) : Results of Ring Casting Cracking Test(Materials, Metallurgy & Weldability)
- Assessment of Solidification Cracking Test for Aluminum Alloy Welds(MATERIALS METALLURGY AND WELDABILITY)
- Comparison of Weld Crack Susceptibility of Recent Aluminum Alloys
- New Al-7%Mg Welding Electrode for Crackles Welding of Al-Zn-Mg(7NO1) High Strength Aluminum Alloy (Report I) : Investigation on Weld Solidification Crack Susceptibility(Materials, Metallurgy, Weldability)
- Weldability of Molybdenum and Its Alloy Sheet (Report II) : Ductility of EB and GTA Welds(Materials, Metallurgy, Weldability)
- Weldability of Molybdenum and Its Alloy Sheet (Report I)(Materials, Metallurgy, Weldability)
- Effects of Current Pulsation on Weld Solidification Structure of Aluminum Alloys
- Effect of Electromagnetic Stirring on Weld Solidification Structure of Aluminum Alloys (Report II) : Investigation on GTA in DCSP Weld Metal of 8mm Thick Plate
- Surface Hardening of Various Metals and Alloys with Boronizing Technique(Materials, Metallurgy & Weldability)
- Surface Hardening of Gold with Boronizing Technique(Materials, Metallurgy & Weldability)
- Ion Nitriding Hardening of Non Ferrous Alloys (Report I)(Materials, Metallurgy & Weldability)
- Surface Hardening of Copper-Nickel Alloys with Boronizing(Materials, Metallurgy & Weldability)
- Pulsed CO_2 Arc Welding
- Corrosion Behavior of Tentative Nickel Binary and Ternary Alloys after Plasma Ion Nitriding Treatment : Studies on Surface Modification of Non Ferrous Metals by means of Plasma Ion Nitriding (PIN) Process (Report 3)(Materials, Metallurgy & Weldability)
- Surface Hardening of Ni Alloys by Means of Plasma Ion Nitriding (PIN) Process (Report II) : Effect of Alloying Elements on Surface Hardening(Materials, Metallurgy & Weldability)
- Surface Hardening of Ni Alloys by Means of Plasma Ion Nitriding (PIN) Process (Report 1)(Materials, Metallurgy & Weldability)
- Surface Hardening of Ni-base Alloys with Boronizing Technique(Materials, Metallurgy & Weldability)
- Rapid Plasma Nitriding Process by Means of Hollow Cathode Glow Discharge(Materials, Metallurgy & Weldability)
- Numerical Computation of Arc Pressure Distribution(Welding Physics, Process & Instrument)
- Melting Phenomena of Flux Cored Wire(Welding Physics, Process & Instrument)
- Effect of Surface Coating around Tungsten Electrode on Formation of "Rim"
- Gas-Tungsten-Arc Electrode (Report 2) : Measurement of cathode temperature(Welding Physics, Process & Instrument)
- New Sintered Electrode of Ir-Y_2O_3 System for Air-Plasma Cutting(Materials, Metallurgy & Weldability)
- New Cathode Material for Air-Plasma Cutting (Report IV) : Direct Observation of Cathode Surface Erosion Process(Physics, Process, Instrument & Measurement)
- New Cathode Material for Air-Plasma Cutting (Report III) : Effect of Thermal and Electric Properties of Ru-Y_2O_3 on Electrode Consumption(Physics, Process, Instruments & Measurement)
- New Cathode Material for Air-Plasma Cutting (Report II) : Effect of Sintering Temperature on Electrode Consumption(Physics, Process, Instrument & Measurement)
- New Cathode Materials for Air-Plasma Cutting(Materials, Metallurgy & Weldability)
- Evaluation of Transformation Expansion and Its Beneficial Effect on Cold Crack Susceptibility Using y-Slit Crack Test Instrumend with Strain Gauge(Materials, Metallurgy & Weldability)
- Effect of Transformation Expansion on Restraint Stress of Weldment in Relation to Cold Cracking of High Strength Steels(Materials, Metallurgy & Weldability)
- Evaluation of Cold Crack Susceptibility in Weld Metal of High Strength Steels Using LB-TRC Test(Materials, Metallurgy, Weldability)
- Dynamic Observation with Nomarski Microscope of Hydrogen-Induced Delayed Cracking in High Strength Steel Weldments
- Propagation Behavior of Root Crack in Weld Metal of High Strength Steel on the Basis of AE Source Location Technique : Application of Acoustic Emission Technique for Weld Cracking (III)(Materials, Metallurgy, Weldability)
- Effect of Oxygen Content on Diffusible Hydrogen in Weld Metal in Inert-Gas Arc Welding for High Strength Steel
- Fractographic Investigation on Root Crack in the TRC Test of HY-130 Steel : Studies on Fractography of Welded Zone (II)
- Weld Cracking in Duplex Stainless Steel (Report III) : Numerical Analysis on Solidification Brittleness Temperature Range in Stainless Steel(Materials, Metallurgy & Weldability)
- Weld Cracking in Duplex Stainless Steel (Report II) : Modelling of Cellular Dendritic Growth during Weld Solidification(Materials, Metallurgy & Weldability)
- Weld Cracking in Duplex Stainless Steel (Report I) : Aspects of Solidification Sequence Revealed by Quenching(Materials, Metallurgy & Weldability)
- Measurements of Carbon Content in M-A Constituent in HAZ of High Strength Steel Welds
- Stress Corrosion Cracking Susceptibilities of Carbon Steel and its Welded Joint in High Temperature Water(Materials, Metallurgy & Weldability)
- Stress Corrosion Cracking Susceptibilities of Carbon Steels in High Temperature and High Pressure Water(Materials, Metallurgy & Weldability)
- Investigation of Metallography and Behavior of M-A Constituent in Weld HAZ of HSLA Steels(Materials, Metallurgy & Weldability)
- Evaluations of Ductility Characteristics and Cracking Susceptibility of Al Alloys during Welding(Materials, Metallurgy & Weldability)
- Nitrogen Content of 316L Weld Metal and Its Fine Particle by Means of High-pressure MIG Arc Welding
- Weldability of High Nitrogen Austenitic Stainless Steel Reports 2 : Nitrogen Absorption of 316L Weld Metal and Its fine particles in Extreme Environments(Materials, Metallurgy & Weldability)
- Effect of Ar or He Pressure on the Formation of Fine Metal Powder by the MIG Arc Melting Process(Materials, Metallurgy & Weldability)
- Vaporization of Mn Element in Electron Beam Weld Metals of Fe-Mn Binary Steels
- Carbide Addition on Aluminum Alloy Surface by Plasma Transferred Arc Welding Process(Surface Processing)
- Varestraint Test for Hot Crack Susceptibility of HY-type High Strength Steels
- Microstructurs and Toughness of High Heat Input Electro-Slag Weld Metal of 50Kgf/mm^2 Class Constructional Steels(Materials, Metallurgy & Weldability)
- Effect of Oxide Morphology on Bond Strength of Diffusion-Bonded Interfaces of Al-Alloys(Materials, Metallurgy & Weldability)
- Interfacial Oxide in Diffusion-Bonded Joints of Al-Binary Alloys by Transmission Electron Microscopy(Materials, Metallurgy & Weldability)
- Behavior of Interfacial Oxide during Diffusion Bonding of Aluminum Alloys and Its Influence on Joint Strength(Materials, Metallurgy & Weldability)