焼失型装入物による焼結ケーキ性状および通気性への影響(原料層構造設計による焼結プロセス制御,焼結その3,<特集号>製銑プロセスの環境調和・資源対応力強化を目指して)

概要

論文の詳細を見る
To increase the utilization of the high combined water ores in sinter production, the improvement of gas permeability of the sintering bed is required. It was attempted for permeability improvement that the burning down materials; paper briquette (PB) would be inserted into the lower half of sintering bed up to 5 vol% at pot test. The permeability of the bed was almost equal to that of normal bed during sintering of the upper bed, but at the lower half of the bed permeability increased in proportion of PB insertion volume. The reason of permeability improvement is that the flow resistance at combustion zone decreases with formation of macro void caused by PB combustion just before ignition of the coke breeze. The ratio of large particle in the product sinter reduced as increase of PB insertion. It is considered that thin parts of sinter; "bridge" between macro voids formed by PB insertion, and these bridges break preferentially during sizing process. Therefore, the large sinter particle could decrease as PB insertion increases.
社団法人日本鉄鋼協会の論文
2006-12-01