トラクションドライブを用いたサーボ機構の研究 : 第2報, 高速回転における制御精度の向上
スポンサーリンク
概要
- 論文の詳細を見る
The authors tried to apply traction drive to a constant velocity servomechanism for NC machines. The 1st report described basic characteristics of the traction drive servomechanism. This 2nd report describes a method to achieve high-accuracy rotation. The high-precision servomechanism requires a high-resolution encoder to detect rotary position, whereas conventional high-resolution encoders can not rotate at high speed. Therefore, the authors tried to solve the problem of resolution and maximum rotary speed by using non-sinusoidal-wave two-phase type PLL (Phase Locked Loop). By using this non-sinusoidal-wave two-phase type PLL for interpolating tracking error, a very high resolution detection of rotary angle at a high speed rotation was achieved even using low-cost encoders of which output is non-sinusoidal wave. Traction drive damps torque ripple of high frequency, but transmits torque ripple of low frequency. Most part of torque ripple of low frequency is due to eccentricity of toilers. As the rotary speed of rollers gets high, the torque ripple has a frequency at which it can be eliminated neither by traction drive nor by feedback control. Because the mechanism of torque ripple is very complicated, it is difficult to conpemsate by detecting of rollers' eccentricity. Therefore, the authors used repetitive control to reduce the position error associated with roller rotation, and obtained high-accuracy rotation in the experiments. This paper presents the interpolation method of tracking error using non-sinusoidal-wave two-phase type PLL and the reduction method of tracking error using repetitive control.
- 一般社団法人日本機械学会の論文
- 1999-05-25
著者
-
Wang Lirong
Department Of Mechanical Science And Engineering Tokyo Institute Of Technology
-
江村 超
東北大 大学院工学研究科
-
王 磊
Tokyo Inst. Technol. Tokyo Jpn
-
江村 超
東北大学大学院工学研究科
-
江村 超
東北大学
-
王 磊
東北大学大学院工学研究科
関連論文
- 脚伸縮による力学的エネルギー回復に基づく動的歩容生成(2足歩行ロボット1)
- ねじ状ビトリファイドボンドCBNホイールによる歯車研削
- ビトリファイドボンドcBNホイールを用いた歯車研削
- 倒立振子から始めた動的2脚ロボットの開発
- 1脚,2脚,4脚ロボットの平面受動走行(歩行ロボット2)
- 4リンク床運動ロボットの後転跳び制御(2足歩行ロボット2)
- 脚式走行ロボツトにおける非線形振動
- 対称歩行制御と5リンク2足歩行モデルへの適用
- ビデオカメラを用いた車輪型移動ロボット用軌道計測システムの精度向上に関する研究
- A product modeling system for remote collaborative reverse engineering
- 1P1-C06 自動操縦自動車における制御情報の生成に関する研究 : 前方映像に基づく操舵情報の生成
- ローラを用いた無背げき減速機に関する研究
- CNCホフ盤に関する研究 : 試作と適用範囲の確認
- 大形かさ歯車の数値制御歯切に関する研究 : 第3報,歯形包絡回数の少ない創成歯切法
- 大形かさ歯車の数値制御歯切に関する研究 : 第2報,エンドミルによるこう配歯の成形歯切
- 大形かさ歯車の数値制御歯切に関する研究 : 第1報,エンドミルによる成形歯切
- メカトロニクス機器のための新しいセンサ技術(制御の発展を支える技術特集号)
- 不等歯非円形歯車に関する研究
- 東北支部の現況
- 超高速NC歯車研削盤
- 歯車加工とサ-ボメカニズム
- Multiuser Videoconference System with Audio Mixing
- 汎用Linuxによるロボット制御システムの開発
- 回転磁界と差動磁界を用いたモーションキャプチャの開発
- 2P1-E10 4 脚ロボットのステレオビジョンを用いた不整地歩行に関する研究
- 2A1-C08 ドライビングシミュレータ用磁気式 6 軸モーションキャプチャシステムの開発
- 1A1-H04 視覚情報による 2 脚ロボットの不整地歩行に関する研究
- 人型2脚歩行ロボットの斜面歩行に関する研究 - ステレオビジョンによる斜度推定とその斜面歩行への応用 -
- 2P2-N4 ヴァーチャルリアリティを用いたドライビングシミュレータの開発(33. VRとインターフェース)
- 2A1-E7 腕を有する2脚ロボットの制御に関する研究(38. 2足ロボット)
- 1P1-G7 PC/AT互換機を用いた4脚ロボット制御システムの構築 : PCIユニバーサルIFの開発とLinuxによる制御(47. PC/AT互換機を用いたオープンロボットコントローラ)
- (11)トラクションドライブを用いたサーボ機構の研究 : 第2報, 高速回転における制御精度の向上
- 1P1-42-065 ステレオ画像による斜度推定を用いた起伏地形における 2 脚ロボットの歩行に関する研究
- DSPを用いた非正弦波2相型PLL式高分解能位置決めサーボコントローラ
- すべり速度フィードバックによるトラクションドライブサーボの負荷特性の向上
- 多条CBNウォームによる高速・高能率歯車研削
- トラクションドライブを用いたサーボ機構の研究 : 第2報, 高速回転における制御精度の向上
- 動歩行ロボット用レートジャイロのマルチセンサを用いた特性向上
- トラクションドライブを用いたサーボ機構の研究 : 第1報,基本特性の測定と滑り速度フィードバック補償の提案
- 歩行ロボットの関節に用いる並列クランクスライダ機構 : 第2報,静力学および動力学解析
- 歩行ロボットの関節に用いる並列クランクスライダ機構 : 第1報,機構の運動学的解析
- Modeling Approach of Functional Model for Multidomain System
- 非円形歯車のかみあい率に関する研究
- Servomechanism Using Traction Drive : Improvement of Servo Accuracy at High-Speed Rotation
- ねじ状CBNホイールを用いたNC歯車研削盤用主軸の開発に関する研究
- 3314 Feature extraction based Efficient Iterative Closest Point Algorithm
- 不等速運動動力伝達機構(最近の運動設計技術)
- 非円形歯車を用いたステアリング機構の研究 : 第2報, 試作と実験
- 非円形歯車を用いたステアリング機構の研究 : 第1報, 機構の提案と解析
- ダイレクトドライブ式NCホブ盤に関する研究 : 第2報,歯切精度向上の検討
- ダイレクトドライブ式NCホブ盤に関する研究 : 第1報,慣性ダンパの併用によるサーボ剛性の増大
- 機械制御におけるメカトロニクス
- バイオマスタールの水蒸気改質用ニッケルおよびコバルト合金触媒の開発