超高温領域のクリープ疲労寿命評価

概要

論文の詳細を見る
Life prediction methods of creep fatigue were investigated to consider applications to Hastily XRs at very high temperatures where materials would be damaged severely by creep deformation. The ductility exhaustion rule, coupled with a creep constitutive equation consisting of primary and secondary stages, showed a good prediction of creep-fatigue life as well as the damage-rate equations. The strain range partitioning method was also discussed regarding its possibility for life prediction. The results of these methods were compared with the time fraction rule in conjunction with the Miner's rule. In these experiments, creep tests were done under constant stress condition in air, and low. cycle fatigue tests were carried out with and without a dwell period in vacuum. Creep-fatigue damage was evaluated in the life of low-cycle fatigue tests with a dwell period. All specimens were fabricated from the same hot-rolled plates to reduce scatter in different heat treatments.
一般社団法人日本機械学会の論文
1993-01-25