Stress Intensity Factors and Order of Stress Singularities at the Tips of a Crack Normal to the Bimaterial Interface : Solid-Mechanics, Strength of Materials
スポンサーリンク
概要
- 論文の詳細を見る
The plane elastostatic problem for two bonded elastic half planes consisting of isotropic and anisotropic materials is considered. It is assumed that the anisotropic half plane contains a straight crack normal to the bimaterial interface, and that the bonded plane is subjected to a constant strain away from, and perpendicular to, the crack. Singular stress fields at the tips of a crack fully embedded in the anisotropic half plane and terminating at the interface are investigated. Mathematical formulations are made using the method of continuous distribution of dislocations and singular integral equation method. Numerical calculations are carried out for the stress intensity factors and the order of stress singularities at the tips of the crack.
- 一般社団法人日本機械学会の論文
著者
-
Matsumoto Hiroyuki
Tokyo Institute Of Technology
-
Nakahara I
Scientific And Technological College
-
KASANO Hideaki
Tokyo Institute of Technology
-
WATANABE Tsuneo
Tokyo Institute of Technology
-
NAKAHARA Ichiro
Scientific and Technological College
-
Kasano H
Takushoku Univ. Tokyo Jpn
-
Matsumoto H
Tokyo Institute Of Technology Department Of Mechanical Engineering And Science
-
Watanabe T
Tokyo Institute Of Technology
関連論文
- Dynamic Deformations and Stresses in a Circular Cylindrical Shell with Both Ends Clamped Subjected to Translational Excitations at the Base
- Homolog of FlhDC, a master regulator for flagellum synthesis : required for pathogenicity in Erwinia carotovora subsp. carotovora
- D-Alanine-D-alanine ligase gene (ddl) of Erwinia chrysanthemi strain EC16 II : analysis of pectate lyase regulation using ddl^- mutant
- D-Alanine-D-Alanine Ligase Gene (ddl) of Erwinia chrysanthemi Strain EC16 l. Isolation and Gene Dosage Effect on Pectate Lyase Synthesis
- Plane Elastostatic Analysis of a Crack Passing Through a Bi-Material Interface
- Stress Intensity Factors and Order of Stress Singularities at the Tips of a Crack Normal to the Bimaterial Interface : Solid-Mechanics, Strength of Materials
- A Comparative Study of Crack/Crack Interaction in Composite Materials Using Macro and Micromechanical Models
- Singular Stress Fields at the Tips of a Crack Normal to the Bimaterial Interface of Isotropic and Anisotropic Half Planes
- A Cylindrical Interface Crack in a Nonhomogeneous Anisotropic Elastic Body under Axially Symmetric Torsion
- Three Dimensional Stress State in a Transversely Isotropic Hollow Cylinder with a Rigid Hoop
- A Torsion-free Axisymmetric Problem of a Cylindrical Crack in a Transversely Isotropic Body
- Three Dimensional Contact Problem of a Rigid Ring Bonded to an Elastic Hollow Cylinder
- Three Dimensional Stress State in an Internally-pressurized Hollow Cylinder with a Reinforcing Ring
- Torsion of an Infinite Solid Having a Rigid Cylindrical Inclusion of Finite Length
- Stresses and Deformations in a Transversely Isotropic Hollow Cylinder under a Ring of Radial Load
- Tension of an Infinite Body Having a Rigid Cylindrical Inclusion of Finite Length
- An Infinite Solid Cylinder under Bending by Concentrated Loads
- A Transversely Isotropic Circular Cylinder under Concentrated Loads
- An Infinite Solid Cylinder Subjected to Two Diametrically Opposite Concentrated Loads
- Transport of Human Immunoglobulin G and Fc-Fusion Proteins to Chicken Egg Yolk(BIOCHEMICAL ENGINEERING)
- Production of Anti-CD2 Chimeric Antibody by Recombinant Animal Cells(CELL AND TISSUE ENGINEERING)
- Production of Anti-Prion scFv-Fc Fusion Proteins by Recombinant Animal Cells
- The Semi-Infinite Plate Subjected to Impact Load on the Free Boundary
- Thick Plate Subjected to Torsional Impact by a Rigid Circular Cylinder
- Residual Bending Strengths of CFRP Laminates after Impact
- Load and Strain Histories for CFRP Laminates under Low-Velocity Impact
- The Coupled Response of a Semi-Infinite Circular Cylindrical Shell Subjected to Waterhammer Waves
- Impulsive Response of a Finite Circular Cylindrical Shell Subjected to Waterhammer Waves
- Axisymmetrical Impulsive Responses of an Infinite Circular Cylindrical Shell Filled with Liquid : Solid-Mechanics, Strength of Materials
- Axisymmetrical Impulsive Responses of an Infinite Circular Cylindrical Shell Filled with Liquid : Solid-Mechanics, Strength of Materials
- Transient Responses of a Cantilever Cylindrical Shell Subjected to Impulsive Loads on Its Free Edge : The Influences of Rotatory Inertia and Transverse Shear Deformation
- Dynamic Displacements and Stresses in a Circular Cylindrical Shell of Finite Length with Both Ends Clamped Which is Subjected to Concentrated impulsive Loads
- Dynamic Deformations and Stresses in a Cantilever Cylindrical Shell under Impulsive Loads
- Bifurcation or Skew of a Rapidly Propagating Crack : Case of Mode III Crack
- A Transversely Isotropic Elastic Plate Pressed between Two Rigid Cylindrical Surfaces
- A Cylindrical Interface Crack in a Nonhomogeneous Anisotropic Elastic Body
- Evaluation of Dynamic Fracture Toughness of Unidirectional CFRP Laminates
- Boundary Element Analysis for Unsteady Elastodynamic Problems Based on the Laplace Transform
- Submicron Particles Agglomeration by Charged Water Droplet
- Hall Mobility in n-Type Molybdenum Ditelluride
- Application of a Singular Integral Equation Method to a Crack Branching at an Interface
- The Relation Between the Impact Load History and the Impacted Point on a Cantilever Beam : Solid-Mechanics, Strength of Materials
- Dynamic Responses of Circular Cylindrical Shells Having Finite Lengths Subjected to Concentrated Impulsive Loads
- Stress Analysis of an Orthotropic Laminated Slab Subjected to Transverse Load
- Deformations and Stresses in a Hollow Sphere with Spherical Transversal Isotropy under Impulsive Pressure
- Torsional Stress Wave Propagation in a Semi-Infinite Conical Bar
- A Semi-infinite Body Subjected to an Impulsive Torque on a Hemispherical Pit of a Free Surface
- Visco-elastic Half-space Subjected to Impact Torsion by a Rigid Cylinder
- Identification of the Dynamic Visco-elastic Properties under Longitudinal Impact : 3-Parameter Standard Solid Model