Dynamic Deformations and Stresses in a Circular Cylindrical Shell with Both Ends Clamped Subjected to Translational Excitations at the Base
スポンサーリンク
概要
- 論文の詳細を見る
In this paper, an exact analysis for the dynamic stresses and deformations in a circular cylindrical shell with both ends clamped subjected to impulsive motions at the clamped end is presented on the basis of Flugge's dynamic shell theory and with use of Laplace transformation. The end motions are prescribed by three kinds of loading functions whose velocity histories in time are half sine, rectangular and exponentially decaying pulses, respectively. In the results, it is shown that the dynamic deformations and stresses are much affected mainly by the velocity histories of the end motions and by the relation between the period of the lowest natural frequency of the cylindrical shell and that of the end motions.
- 一般社団法人日本機械学会の論文
著者
-
Matsumoto Hiroyuki
Tokyo Institute Of Technology
-
Itoh Akihide
Nippon Electric Co. Ltd.
-
NAKAHARA Ichiro
Faculty of Engineering, Tokyo Institute of Technology
-
UJIHASHI Sadayuki
Faculty of Engineering, Tokyo Institute of Technology
-
MATSUMOTO Hiroyuki
Faculty of Engineering, Tokyo Institute of Technology
-
Nakahara I
Scientific And Technological College
-
Nakahara Ichiro
Faculty Of Engineering Tokyo Institute Of Technology
-
Matsumoto H
Tokyo Institute Of Technology Department Of Mechanical Engineering And Science
-
Ujihashi S
Tokyo Institute Of Technology Department Of Mechanical And Environmental Inforamtics
-
Ujihashi Sadayuki
Faculty Of Engineering Tokyo Institute Of Technology
-
Matsumoto Hiroyuki
Faculty Of Engineering Tokyo Institute Of Technology
関連論文
- Stresses in an Elastic Circular Cylinder with a Spherical Cavity under Transverse Bending
- Dynamic Deformations and Stresses in a Circular Cylindrical Shell with Both Ends Clamped Subjected to Translational Excitations at the Base
- Homolog of FlhDC, a master regulator for flagellum synthesis : required for pathogenicity in Erwinia carotovora subsp. carotovora
- D-Alanine-D-alanine ligase gene (ddl) of Erwinia chrysanthemi strain EC16 II : analysis of pectate lyase regulation using ddl^- mutant
- D-Alanine-D-Alanine Ligase Gene (ddl) of Erwinia chrysanthemi Strain EC16 l. Isolation and Gene Dosage Effect on Pectate Lyase Synthesis
- Plane Elastostatic Analysis of a Crack Passing Through a Bi-Material Interface
- Stress Intensity Factors and Order of Stress Singularities at the Tips of a Crack Normal to the Bimaterial Interface : Solid-Mechanics, Strength of Materials
- A Comparative Study of Crack/Crack Interaction in Composite Materials Using Macro and Micromechanical Models
- Singular Stress Fields at the Tips of a Crack Normal to the Bimaterial Interface of Isotropic and Anisotropic Half Planes
- A Cylindrical Interface Crack in a Nonhomogeneous Anisotropic Elastic Body under Axially Symmetric Torsion
- Three Dimensional Stress State in a Transversely Isotropic Hollow Cylinder with a Rigid Hoop
- A Torsion-free Axisymmetric Problem of a Cylindrical Crack in a Transversely Isotropic Body
- Three Dimensional Contact Problem of a Rigid Ring Bonded to an Elastic Hollow Cylinder
- Three Dimensional Stress State in an Internally-pressurized Hollow Cylinder with a Reinforcing Ring
- Torsion of an Infinite Solid Having a Rigid Cylindrical Inclusion of Finite Length
- Stresses and Deformations in a Transversely Isotropic Hollow Cylinder under a Ring of Radial Load
- Tension of an Infinite Body Having a Rigid Cylindrical Inclusion of Finite Length
- An Infinite Solid Cylinder under Bending by Concentrated Loads
- A Transversely Isotropic Circular Cylinder under Concentrated Loads
- An Infinite Solid Cylinder Subjected to Two Diametrically Opposite Concentrated Loads
- Transport of Human Immunoglobulin G and Fc-Fusion Proteins to Chicken Egg Yolk(BIOCHEMICAL ENGINEERING)
- Production of Anti-CD2 Chimeric Antibody by Recombinant Animal Cells(CELL AND TISSUE ENGINEERING)
- Production of Anti-Prion scFv-Fc Fusion Proteins by Recombinant Animal Cells
- The Semi-Infinite Plate Subjected to Impact Load on the Free Boundary
- Thick Plate Subjected to Torsional Impact by a Rigid Circular Cylinder
- Residual Bending Strengths of CFRP Laminates after Impact
- Load and Strain Histories for CFRP Laminates under Low-Velocity Impact
- The Coupled Response of a Semi-Infinite Circular Cylindrical Shell Subjected to Waterhammer Waves
- Impulsive Response of a Finite Circular Cylindrical Shell Subjected to Waterhammer Waves
- A Crack Problem on a Slab with an Annular Crack Subjected to Pressure
- Axisymmetrical Impulsive Responses of an Infinite Circular Cylindrical Shell Filled with Liquid : Solid-Mechanics, Strength of Materials
- Axisymmetrical Impulsive Responses of an Infinite Circular Cylindrical Shell Filled with Liquid : Solid-Mechanics, Strength of Materials
- Transient Responses of a Cantilever Cylindrical Shell Subjected to Impulsive Loads on Its Free Edge : The Influences of Rotatory Inertia and Transverse Shear Deformation
- Dynamic Displacements and Stresses in a Circular Cylindrical Shell of Finite Length with Both Ends Clamped Which is Subjected to Concentrated impulsive Loads
- Dynamic Deformations and Stresses in a Cantilever Cylindrical Shell under Impulsive Loads
- Bifurcation or Skew of a Rapidly Propagating Crack : Case of Mode III Crack
- A Transversely Isotropic Elastic Plate Pressed between Two Rigid Cylindrical Surfaces
- A Cylindrical Interface Crack in a Nonhomogeneous Anisotropic Elastic Body
- Evaluation of Dynamic Fracture Toughness of Unidirectional CFRP Laminates
- Boundary Element Analysis for Unsteady Elastodynamic Problems Based on the Laplace Transform
- On the Asymmetric Problem of Elasticity Theory for an Infinite Elastic Solid Containing Some Spherical Cavities : 1st Report-An Infinite Solid Containing Two Spherical Cavities
- Stresses in a Thick Plate Containing an Eccentric Spherical Cavity Under Uniaxial Tension
- An Asymmetric Problem of a Thick Plate Having a Hemi-spherical Pit under Uniaxial Tension
- Stress Concentration Due to a Hemi-prolate Spheroidal Pit at a Free Surface of a Semi-infinite Body under All-around Tension
- Stress Concentration due to a Hemispherical Pit at a Free Surface of a Thick Plate under All-around Tension
- Application of a Singular Integral Equation Method to a Crack Branching at an Interface
- Dynamic Stresses of an Infinite Circular Cylindrical Shell Subjected to Concentrated Impulsive Loads
- The Relation Between the Impact Load History and the Impacted Point on a Cantilever Beam : Solid-Mechanics, Strength of Materials
- Impact Torsional Stress Wave Propagating in a Circular Bar
- Stress Concentration around a Spherical Cavity in a Semi-infinite Elastic Body under Uniaxial Tension
- The Transient Stress in an Elastic Half-space Excited by Impulsive Loading over one Quarter of Its Surface
- The Study of Mechanical Similarity in Longitudinal Impact Problems
- Transient Stress of an Elastic Half Space Subjected to a Uniform Impulsive Load in a Rectangular Region of Its Surface
- Stresses in an Elastic Thick Plate with a Spherical Cavity Under Transverse Bending
- Individual Modeling Method of a Bone Based on the X-ray CT Data
- Dynamic Responses of Circular Cylindrical Shells Having Finite Lengths Subjected to Concentrated Impulsive Loads
- Stress Analysis of an Orthotropic Laminated Slab Subjected to Transverse Load
- Study of Group Robots Adaptively Forming a Mechanical Structure : Information-Processing Functions of the Cellular Robot Required for Transporting a Load to an Opposite Side
- Study of Group Robots Adaptively Forming a Mechanical Structure : Effect of Mechanical Properties of Cellular Robots on Structure Formation
- Deformations and Stresses in a Hollow Sphere with Spherical Transversal Isotropy under Impulsive Pressure
- Dynamic Stresses and Deformations in a Thick Cylinder under Nonaxially Symmetrical Impulsive Loads : 1st Report, Analysis Based on the Two Dimensional Dynamic Theory of Elasticity
- Torsional Stress Wave Propagation in a Semi-Infinite Conical Bar
- A Semi-infinite Body Subjected to an Impulsive Torque on a Hemispherical Pit of a Free Surface
- Visco-elastic Half-space Subjected to Impact Torsion by a Rigid Cylinder
- Transient Stress in a Circular Disk under Diametrical Impact Loads
- Identification of the Dynamic Visco-elastic Properties under Longitudinal Impact : 3-Parameter Standard Solid Model
- Three-dimensional Stress Concentration around a Spherical Cavity in a Thick Plate under Uniaxial Tension