高砥石周速及び高テーブル速度による加工条件での窒化ケイ素セラミックスの平面研削特性

概要

論文の詳細を見る
Si_3N_4 ceramic specimens were ground under different conditions with high speed (wheel speed: 55 m/s) and speed stroke (table speed: 45-90 m/min) . The grindability was evaluated by grinding force, specific grinding energy and grinding ratio in comparison with con vent_ional surface grinding. The strength degradation and surface roughness of ground workpieces were examined. The main results are summarized as follows. (1) This grinding conditions showed lower normal grinding force and specific grinding energy in a higher stock removal rate. And, the strength degradation and the surface roughness were not changed significantly even by increasing stock removal rate. (2) The lower normal grinding force and specific grinding energy were caused by a lower mean value of the maximum grain depth of cut. (3) This grinding conditions showed lower specific grinding energy in increasing stock removal and higher grinding ratio.
社団法人日本セラミックス協会の論文
1995-12-01