FIDを使った黒色焼結体クラック検出法の研究
スポンサーリンク
概要
- 論文の詳細を見る
A non-destructive testing technique for a crack existing randomly on a ferrite surface has been developed. Wher the sample is immersed into the volatile solvent, the solvent penetrates into the crack. The surface of sampl? becomes dry quickly, however the solvent remains in the crack and evaporates slowly. The crack is detected independently its position by detecting the evaporating gas from the crack. A FID (flame ionization detector) iE used to detect the extremely thin solvent gas. The optimum treatments from immersion treatment to sealing treatment are studied using several samples with the crack width from 0.003 mm to 0.06 mm. A lot of cracks ar? tested using the experimental apparatus. Experimental results show that a linear relationship is established between crack width and S/N ratio, and the detectable crack length varies inversely with the crack width, fot example in case the surface area is 250 mm<SUP>2</SUP>, the minimum detectable length with crack width 0.05 mm is 0.3 mm and that with 0.003 mm is 1.4 mm.
- 公益社団法人精密工学会の論文
- 1995-05-05
著者
関連論文
- 微小パーティクル検出用半導体レーザ高照度照明系の開発
- 簡易型自動焦点検出光学系の開発
- センサ走査方向比較検査によるTFT-LCD上微粒子検出
- 微小径深穴用光学式内径測定装置の開発
- 深穴小径孔内径光学的測定装置の開発
- 偏光分離2画像を用いたエッチング部品断面形状計測技術
- 内面溝形状測定装置の光学系に起因する測定誤差の実験的解析
- LED放射束制御によるピストンリング自動計数装置の開発
- ピンホール像投影方式2次元形状自動測定装置の開発
- LED・フレネルレンズを用いたベーン上エッジ部カケ検出の自動化