Effects of metal primers on bonding of adhesive resin cement to noble alloys for porcelain fusing
スポンサーリンク
概要
- 論文の詳細を見る
This study evaluated the effects of metal primers on the bonding of adhesive resin to four pure metals (Au, Pd, Ag, Cu) and two noble alloys for porcelain fusing (high-gold and high-palladium content alloys). Bonding surface was polished with 600-grit silicon carbide paper and primed with one of the three metal primers (V-Primer, Metaltite, and M.L. Primer). Bonded specimens were fabricated by applying adhesive resin (Super-Bond C&B) on the primed surface. Shear bond strength (SBS) was determined both before and after thermocycling (4–60°C for 2,000 cycles). The highest SBS values to each pure metal after thermocycling were 33.5 MPa for Au by M.L. Primer, 35.0 MPa for Ag by V-Primer, and 34.4 MPa for Cu by Metaltite. SBS to high-gold content alloy after thermocycling was 33.3 MPa by M.L. Primer. None of the primers was effective for pure Pd and high-palladium content alloy after thermocycling.
- 2010-03-01
著者
-
OKUYA Nobuhiro
Department of Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental
-
MINAMI Hiroyuki
Fixed Prosthetic Clinic, Kagoshima University Medical and Dental Hospital
-
KURASHIGE Hisanori
Department of Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental
-
MURAHARA Sadaaki
Department of Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental
-
SUZUKI Shiro
Department of Prosthodontics, University of Alabama at Birmingham, School of Dentistry
-
TANAKA Takuo
Department of Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental
-
Suzuki Shiro
Department Of Prosthodontics University Of Alabama At Birmingham School Of Dentistry
-
Suzuki Shiro
Department Of Gastroenterology And Hepatology Tokyo Medical University
-
Okuya Nobuhiro
Department Of Fixed Prosthetic Dentistry Kagoshima University Graduate School Of Medical And Dental
-
Minami Hiroyuki
Kagoshima Univ. Medical And Dental Hospital Kagoshima Jpn
-
Minami Hiroyuki
Fixed Prosthetic Clinic Kagoshima University Medical And Dental Hospital
-
Suzuki Shiro
Materials Science & Advanced Devices Nhk Science & Technical Research Laboratories
-
Kurashige Hisanori
Department Of Fixed Prosthetic Dentistry Kagoshima University Graduate School Of Medical And Dental
-
Suzuki Shiro
鹿児島大学 医歯学総合研究科咬合機能補綴学
-
Tanaka T
Department Of Fixed Prosthetic Dentistry Kagoshima University Graduate School Of Medical And Dental
-
Murahara Sadaaki
Department Of Fixed Prosthetic Dentistry Kagoshima University Graduate School Of Medical And Dental
-
TANAKA Takuo
Department of Fixed Prosthetic Dentistry, Advanced Therapeutic Course, Kagoshima University Graduate School of Medical and Dental Sciences
関連論文
- Effect of fiber-premixed indirect resin composite substructure on fracture resistance of MOD composite inlays adhered with two different adhesive resin cements
- Effects of metal primers on bonding of adhesive resin cement to noble alloys for porcelain fusing
- Influence of Mechanical Properties of Two Resin Cements on Durability of Bond Strength to Dentin after Cyclic Loading
- A Novel Primer on Dentin Bonding of 4-META/MMA-TBB to Collagen-depleted Dentin
- Adhesion of 4-META/MMA-TBB Resin to Collagen-depleted Dentin : Effect of Conditioner with Ascorbic Acid/Ferric Chloride
- Effects of metal primers on bonding of adhesive resin cement to noble alloys for porcelain fusing
- Mechanical Properties and Bond Strength of Silicone-based Resilient Denture Liners
- Bonding Strength and Durability of Alkaline-Treated Titanium to Veneering Resin
- Dentin bond strength of a new adhesive system containing calcium phosphate experimentally developed for direct pulp capping
- Effects of attrition, prior acid-etching, and cyclic loading on the bond strength of a self-etching adhesive system to dentin
- Effect of Hydrofluoric Acid Etching on Shear Bond Strength of an Indirect Resin Composite to an Adhesive Cement
- Effects of Thermal Cycling on Surface Texture of Restorative Composite Materials
- In Vitro Evaluation of Bond Strength and Surface Roughness of a Resin-Paint Material
- Effect of the concentrations of calcium chloride and synthetic peptides in primers on dentin bond strength of an experimental adhesive system
- Construction and Performance of a Large-Aperture Wire-Chamber Spectrometer for Pion Scattering Experiments at KEK
- Cytotoxicity of Dental Resin Monomers in the Presence of S9 mix Enzymes
- A Test of Lead Glass Shower Counters
- Effect of light intensity for adhesives on shear bond strength to dentin
- Effect of Air-blowing Variables on Bond Strength of All-in-one Adhesives to Bovine Dentin
- Effect of filler size on wear resistance of resin cement
- Decrease in accumulation of ultrasound contrast microbubbles in non-alcoholic steatohepatitis
- Dynamic US contrast study of the liver : Vascular and delayed parenchymal phase
- Usefulness of contrast-enhanced ultrasonography with a new contrast mode, Agent Detection Imaging, in evaluating therapeutic response in hepatocellular carcinoma treated with radio-frequency ablation therapy
- Differential diagnosis of hepatic nodules using delayed parenchymal phase imaging of levovist contrast ultrasound : comparative study with SPIO-MRI
- A study of self-adhesive resin cements for bonding to silver-palladium-copper-gold alloy — Effect of including primer components in cement base
- Photoconductive Properties of Organic Films Based on Porphine Complex Evaluated with Image Pickup Tubes
- Ultra-High-Sensitivity New Super-HARP Pickup Tube and Its Camera(Recent Progress in Photon Detection Technology)
- Image Pickup from Zinc Phthalocyanine/Bathocuproine Double-Layer Film Using Pickup Tube
- Ultrahigh-Sensitivity Pickup Tube Using 35-μm-Thick HARP Photoconductive Film
- Effect of the concentrations of calcium chloride synthetic and peptides in primers on dentin bond strength of an experimental adhesive system
- Evaluation of Wear and Subsequent Dye Penetration of Endodontic Temporary Restorative Materials
- Evaluation of Temporary Restorative Materials for Endodontic Treatments
- Production of Monochromatic γ Rays from Thin Crystal of Silicon
- Improvement of Bonding to Bleached Bovine Tooth Surfaces by Ascorbic Acid Treatment
- Monochromatization of Collimated Coherent Bremsstrahlung from a Thin Silicon Crystal
- Effect of Resin Coating as a Means of Preventing Marginal Leakage beneath Full Cast Crowns
- Study of dE/dx in a Drift Chamber with He-C_2H_6 Gas Mixture
- A study of self-adhesive resin cements for bonding to silver-palladium-copper-gold alloy-Effect of including primer components in cement base
- Identification and characterization of cancer stem cells in ovarian yolk sac tumors
- Examination of T/CP Invariance in the e^+e^-τ^+τ^- Reaction
- Dentin bond strength of an experimental adhesive system containing calcium chloride, synthetic peptides derived from dentin matrix protein 1 (pA and pB), and hydroxyapatite for direct pulp capping and as a bonding agent
- RADIOPHARMACOLOGICAL STUDIES ON THE CADMIUM POISONING
- Clinical Evaluation of Intramuscular Administration of Natural Interferon-γ in the Treatment of Chronic Hepatitis B
- EXPERIMENTAL STUDIES ON THE CARBONIC ANHYDRASE ACTIVITY IX. THE MODE OF ACTION OF ADRENOCORTICAL STEROIDS, ESPECIALLY ALDOSTERONE, ON THE CARBONIC ANHYDRASE IN MICE AND RATS
- BASAL STUDY ON EARLY DIAGNOSIS OF CADMIUM POISONING : CHANGE IN CARBONIC ANHYDRASE ACTIVITY
- Effect of adherend temperature on bond strengths of resin bonding systems to denture base resin and a semi-precious alloy
- Effect of adhesion promoting monomer addition to MMA-TBBO resin on bonding to pure palladium
- Evaluation of fracture resistance of indirect composite resin crowns by cyclic impact test: Influence of crown and abutment materials
- History and current state of metal adhesion systems used in prosthesis fabrication and placement
- Disintegration of sulfonated poly(1,4-piperazinediylterephthaloyl) microcapsules by 1-dodecylpyridinium chloride.
- Cell growth-inhibitory action of SAGP, an antitumor glycoprotein from Streptococcus pyogenes (Su strain).
- Effect of adhesion promoting monomer addition to MMA-TBBO resin on bonding to pure palladium
- Evaluation of fracture resistance of indirect composite resin crowns by cyclic impact test : Influence of crown and abutment materials
- Effect of adherend temperature on bond strengths of resin bonding systems to denture base resin and a semi-precious alloy