Influence of Heat Treatment on Formation Behavior of Boron Nitride Inclusions in P122 Heat Resistant Steel

概要

論文の詳細を見る
To clarify the behavior of the formation of boron nitrides in P122 heat resistant steel containing 0.003 mass% B and 0.06 mass% N, the influence of heat treatments, remelting and hot working were investigated by SEM observations on boron nitrides at the fractured surfaces of the steel samples and by the EDS analysis.Boron nitrides start to precipitate at temperatures between 1150 and 1200°C during the cooling process after hot forging or rolling. They agglomerate to a very large size of about 20 to 30 μm at a very slow cooling rate of 100°C/h. However, they only grow to 1 to 3 μm at a medium slow cooling rate and never precipitate at a very fast cooling rate such as in water quenching. The precipitation behavior of boron nitrides has also been found to be affected by the cooling rate after normalizing but not by the microstructure of the steel resulting from casting or forging.
社団法人日本鉄鋼協会の論文
2006-11-15