Creep properties affected by morphology of MX in high-Cr ferritic steels
スポンサーリンク
概要
- 論文の詳細を見る
- 2000-09-01
著者
-
Abe F
National Institute For Materials Science
-
Abe Fujio
National Institute Of Materials Science
-
Yamada Katsumi
National Research Institute For Metals (nrim)
-
ABE F.
National Institute for Materials Science
-
Abe Fujio
Structural Metals Center National Institute For Materials Science
-
IGARASHI M.
National Research Institute for Metals (NRIM)
-
MUNEKI S.
National Research Institute for Metals (NRIM)
-
Igarashi M
National Research Institute For Metals (nrim)
関連論文
- Creep Fracture Analysis of W Strengthened High Cr Steel Weldment
- Effects of Zr Addition on the Microstructure of 14%Cr4%Al ODS Ferritic Steels
- SB-07-2(070) Assessment of Material Degradation Based on Microstructural Evolution in Type 304H Stainless Steel During Long-Term Creep(Changes in Microstructure 2)
- Effects of Ni and Heat Treatment on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
- Influence of Chemical Composition and Heat Treatment Condition on Impact Toughness of 15Cr Ferritic Creep Resistant Steel
- Improvement in Creep Strength of Precipitation Strengthened 15Cr Ferritic Steel by Controlling Carbon and Nitrogen Contents
- Effects of W and Co on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
- D311 IMPROVEMENT IN CREEP STRENGTH OF PRECIPITATION STRENGTHENED 15CR FERRITIC STEEL BY CONTROLLING OF CARBON AND NITROGEN CONTENTS
- Development of high strength 15Cr creep resistant steel for low emission power plant
- Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Special Issue on Creep and Fatigue at Elevated Temperatures)
- SB-08-3(037) Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Advanced Heat Resistant Steels)
- SB-08-2(034) Development of Precipitation Strengthened 15Cr Ferritic Creep Resistant Steel(Advanced Heat Resistant Steels)
- SB-06-4(038) Changes in Precipitates of Modified 9Cr-1Mo Steel During Long-term Creep Deformation at 873K and 923K(Changes in Microstructure 1)
- Development of High Strengh 15Cr Ferritic Creep Resistant Steel with Addition of Tungsten and Cobalt
- Development of High Strength 15Cr Ferritic Creep Resistant Steel
- Effects of Alloying Elements on Creep Properties of 9Cr-3.3W-0.5Pd-V, Nb, N, B Steels
- Microstructural Evaluation of C-free Martensitic Alloys at High Temperatures
- Behaviour of Mn and Si in the Spray Powders during Steam Oxidation of Ni-Cr Thermal Spray Coatings
- REMAINING LIFE PREDICTION BY THE ISO-STRESS METHOD OF BOILER TUBES AFTER PROLONGED SERVICE
- Improving the Type IV Cracking Resistance of 9Cr Ferritic Steels by Boron Addition : Creep Properties and Microstructures of High-B 9Cr Heat Resistant Steel Weldments-1
- Effect of Pyrocarbon Pre-Coating on the Mechanical Properties of CVI Carbon Fiber/Sic Composites
- Influence of Heat Treatment on Formation Behavior of Boron Nitride Inclusions in P122 Heat Resistant Steel
- Characterization of Mechanically Alloyed Powders for High-Cr Oxide Dispersion Strengthened Ferritic Steel
- SB-06-3(057) Change in Tensile and Creep Properties of 2.25Cr-1Mo Steel by Prolonged Exposure in Plant(Changes in Microstructure 1)
- Prediction of Precipitation Sequences within Grains in 18Cr-8Ni Austenitic Steel by Using System Free Energy Method
- Creep Deformation and the Corresponding Microstructural Evolution in High-Cr Ferritic Steels
- Creep Deformation and the Corresponding Microstructural Evolution in High-Cr Ferritic Steels
- Creep properties affected by morphology of MX in high-Cr ferritic steels
- Effect of Co Addition on Microstructure in High Cr Ferritic Steels
- Effect of Heat Treatment on Precipitation Kinetics in High-Cr Ferritic Steels
- SB-09-1(051) An Improvement on Creep Characteristics in Carbon Free Martensitic Alloys(Advanced Heat Resistant Steels)
- Creep Properties affected by Morphology of MX in High-Cr Ferritic Steels
- Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing W
- Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing W
- Steam Oxidation Studies on 50Ni-50Cr HVOF Coatings on 9Cr-1Mo Steel : Change in Structure and Morphology across the Coating/Substrate Interface
- Gas Contamination due to Milling Atmospheres of Mechanical Alloying and Its Effect on Impact Strength
- Steam Oxidation Resistance of Ni-Cr Thermal Spray Coatings on 9Cr-1Mo Steel. Part 2 : 50Ni-50Cr
- Steam Oxidation Resistance of Ni-Cr Thermal Spray Coatings on 9Cr-1Mo Steel. Part 1 : 80Ni-20Cr
- Effect of Nitrogen Content on Microstructural Aspects and Creep Behavior in Extremely low Carbon 9Cr Heat-resistant Steel
- Effect of Ordering on Hydrogen Embrittlement of Ni-Cr Alloy
- SB-10-1(005) Relationship of Long-term Creep Behavior with Microstructural Evolution in a Nickel-Base Superalloy Udimet 500(Creep Deformation and Fracture of Superalloys)
- SB-08-1(081) Improvement of Creep Strength of Ferritic Steels for 650℃ USC Boilers(Advanced Heat Resistant Steels)
- Kinetics of Carbide Precipitation during Creep and Its Effect on Creep Rate of 10Cr-30Mn Austenitic Steels (Special Issue on Current Topics in Diffusional Phase Transformations)
- Precipitation of Carbides and Alpha-Tungsten in Ni-Cr-W Superalloys at 1,000℃