Effects of Alloying Elements on Creep Properties of 9Cr-3.3W-0.5Pd-V, Nb, N, B Steels

スポンサーリンク

概要

論文の詳細を見る
2002-10-15

著者

関連論文

Creep Fracture Analysis of W Strengthened High Cr Steel Weldment
Effects of Zr Addition on the Microstructure of 14%Cr4%Al ODS Ferritic Steels
SB-07-2(070) Assessment of Material Degradation Based on Microstructural Evolution in Type 304H Stainless Steel During Long-Term Creep(Changes in Microstructure 2)
Effects of Ni and Heat Treatment on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
Influence of Chemical Composition and Heat Treatment Condition on Impact Toughness of 15Cr Ferritic Creep Resistant Steel
Improvement in Creep Strength of Precipitation Strengthened 15Cr Ferritic Steel by Controlling Carbon and Nitrogen Contents
Effects of W and Co on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
D311 IMPROVEMENT IN CREEP STRENGTH OF PRECIPITATION STRENGTHENED 15CR FERRITIC STEEL BY CONTROLLING OF CARBON AND NITROGEN CONTENTS
Development of high strength 15Cr creep resistant steel for low emission power plant
Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Special Issue on Creep and Fatigue at Elevated Temperatures)
SB-08-3(037) Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Advanced Heat Resistant Steels)
SB-08-2(034) Development of Precipitation Strengthened 15Cr Ferritic Creep Resistant Steel(Advanced Heat Resistant Steels)
SB-06-4(038) Changes in Precipitates of Modified 9Cr-1Mo Steel During Long-term Creep Deformation at 873K and 923K(Changes in Microstructure 1)
Development of High Strengh 15Cr Ferritic Creep Resistant Steel with Addition of Tungsten and Cobalt
Development of High Strength 15Cr Ferritic Creep Resistant Steel
3-Year Experience with 2.25 Cr-1.6 W(HCM2S) and 12Cr-0.4Mo-2W(HCM12A) Steel Tubes in a Power Boiler(
Effects of Alloying Elements on Creep Properties of 9Cr-3.3W-0.5Pd-V, Nb, N, B Steels
Microstructural Evaluation of C-free Martensitic Alloys at High Temperatures
F201 The Status of Advanced USC Technology Development in Japan(Steam Turbine-1)
Behaviour of Mn and Si in the Spray Powders during Steam Oxidation of Ni-Cr Thermal Spray Coatings
REMAINING LIFE PREDICTION BY THE ISO-STRESS METHOD OF BOILER TUBES AFTER PROLONGED SERVICE
Degradation of Creep Strength in Welded Joint of 9%Cr Steel
Effect of Pyrocarbon Pre-Coating on the Mechanical Properties of CVI Carbon Fiber/Sic Composites
Influence of Heat Treatment on Formation Behavior of Boron Nitride Inclusions in P122 Heat Resistant Steel
Characterization of Mechanically Alloyed Powders for High-Cr Oxide Dispersion Strengthened Ferritic Steel
SB-06-3(057) Change in Tensile and Creep Properties of 2.25Cr-1Mo Steel by Prolonged Exposure in Plant(Changes in Microstructure 1)
An Asymptotic Regression Curve for Describing the Emergence Pattern of the Azuki Bean Weevil, Callosobruchus chinensis L. (Coleoptera : Bruchidae)
Prediction of Precipitation Sequences within Grains in 18Cr-8Ni Austenitic Steel by Using System Free Energy Method
Creep Deformation and the Corresponding Microstructural Evolution in High-Cr Ferritic Steels
Creep Deformation and the Corresponding Microstructural Evolution in High-Cr Ferritic Steels
Creep properties affected by morphology of MX in high-Cr ferritic steels
Effect of Co Addition on Microstructure in High Cr Ferritic Steels
Effect of Heat Treatment on Precipitation Kinetics in High-Cr Ferritic Steels
SB-09-1(051) An Improvement on Creep Characteristics in Carbon Free Martensitic Alloys(Advanced Heat Resistant Steels)
Creep Properties affected by Morphology of MX in High-Cr Ferritic Steels
Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing W
Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing W
High Temperature Strength and Ductility of β/γ'/γ Multiphase Alloys in Ni-Al-Cr System
Steam Oxidation Studies on 50Ni-50Cr HVOF Coatings on 9Cr-1Mo Steel : Change in Structure and Morphology across the Coating/Substrate Interface
Gas Contamination due to Milling Atmospheres of Mechanical Alloying and Its Effect on Impact Strength
Steam Oxidation Resistance of Ni-Cr Thermal Spray Coatings on 9Cr-1Mo Steel. Part 2 : 50Ni-50Cr
Steam Oxidation Resistance of Ni-Cr Thermal Spray Coatings on 9Cr-1Mo Steel. Part 1 : 80Ni-20Cr
Effect of Nitrogen Content on Microstructural Aspects and Creep Behavior in Extremely low Carbon 9Cr Heat-resistant Steel
Effect of Ordering on Hydrogen Embrittlement of Ni-Cr Alloy
Development of Reduced-Activation Martensitic 9Cr Steels for Fusion Reactor
Kinetics of Carbide Precipitation during Creep and Its Effect on Creep Rate of 10Cr-30Mn Austenitic Steels (Special Issue on Current Topics in Diffusional Phase Transformations)
Precipitation of Carbides and Alpha-Tungsten in Ni-Cr-W Superalloys at 1,000℃
Impurities and Evaluation of Induced Activity of SiC Composites Prepared with Chemical Vapor Infiltration.

もっと見る

スポンサーリンク