Creep Properties affected by Morphology of MX in High-Cr Ferritic Steels
スポンサーリンク
概要
- 論文の詳細を見る
MX-type carbonitrides such as (Nb, V)(C, N) are well known to be effective to improve creep properties of the heat resisting steels at elevated temperatures. The control of precipitation behavior of MX is essential to obtain the stable microstructure that is suitable for heat resisting in the Ultra Super Critical plants. In this study, strong relationship between creep properties and precipitation behavior of MX is investigated by using the high-Cr steels with different C/N-balance.MX is categorized to three types from their characteristic morphology, type I, II and III. It is found that the C/N-balance of steel is one of factors to determine which MX is dominant in the tempered steels. Presence of type III-MX that is formed by secondary precipitation of VN adhering to Nb(C, N) seems to be unfavorable to long-term creep resistance by considering relatively decreasing in distribution density of fine VN, type II-MX. Precipitation sites such as Nb(C, N), type I-MX and excess solute nitrogen promote growth of type III-MX at the tempering stage. We conclude that the control of precipitation kinetics of MX is quite important to achieve good creep properties at high temperatures.
- 社団法人 日本鉄鋼協会の論文
- 2001-03-01
著者
-
ABE Fujio
National Institute for Materials Science
-
Yamada K
Nagoya Univ. Nagoya Jpn
-
YAMADA Katsumi
NKK
-
IGARASHI Masaaki
Sumitomo Metal Industries, Ltd.
-
MUNEKI Seiichi
National Institute for Materials Science
-
Abe F
Steel Research Center National Institute For Materials Seienee
-
Abe Fujio
National Institute Of Materials Science
-
Yamada Katsumi
National Research Institute For Metals (nrim)
-
IGARASHI Masaaki
National Research Institute for Metals
-
Abe Fujio
Structural Metals Center National Institute For Materials Science
-
Igarashi Masaaki
Sumitomo Metal Industries Ltd.
関連論文
- Creep Fracture Analysis of W Strengthened High Cr Steel Weldment
- Effects of Zr Addition on the Microstructure of 14%Cr4%Al ODS Ferritic Steels
- SB-07-2(070) Assessment of Material Degradation Based on Microstructural Evolution in Type 304H Stainless Steel During Long-Term Creep(Changes in Microstructure 2)
- Effects of Ni and Heat Treatment on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
- Influence of Chemical Composition and Heat Treatment Condition on Impact Toughness of 15Cr Ferritic Creep Resistant Steel
- Improvement in Creep Strength of Precipitation Strengthened 15Cr Ferritic Steel by Controlling Carbon and Nitrogen Contents
- Effects of W and Co on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
- D311 IMPROVEMENT IN CREEP STRENGTH OF PRECIPITATION STRENGTHENED 15CR FERRITIC STEEL BY CONTROLLING OF CARBON AND NITROGEN CONTENTS
- Development of high strength 15Cr creep resistant steel for low emission power plant
- Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Special Issue on Creep and Fatigue at Elevated Temperatures)
- SB-08-3(037) Effects of W and Co on the Microstructure and Creep Strength of the Precipitation Strengthened 15Cr Ferritic Steels(Advanced Heat Resistant Steels)
- SB-08-2(034) Development of Precipitation Strengthened 15Cr Ferritic Creep Resistant Steel(Advanced Heat Resistant Steels)
- SB-06-4(038) Changes in Precipitates of Modified 9Cr-1Mo Steel During Long-term Creep Deformation at 873K and 923K(Changes in Microstructure 1)
- Development of High Strengh 15Cr Ferritic Creep Resistant Steel with Addition of Tungsten and Cobalt
- Development of High Strength 15Cr Ferritic Creep Resistant Steel
- Effects of Alloying Elements on Creep Properties of 9Cr-3.3W-0.5Pd-V, Nb, N, B Steels
- Microstructural Evaluation of C-free Martensitic Alloys at High Temperatures
- Behaviour of Mn and Si in the Spray Powders during Steam Oxidation of Ni-Cr Thermal Spray Coatings
- REMAINING LIFE PREDICTION BY THE ISO-STRESS METHOD OF BOILER TUBES AFTER PROLONGED SERVICE
- Effect of Trace Elements on Creep Properties of 0.06C-2.25Cr-1.6W-0.1Mo-0.25V-0.05Nb Steel
- Effect of Pyrocarbon Pre-Coating on the Mechanical Properties of CVI Carbon Fiber/Sic Composites
- Influence of Heat Treatment on Formation Behavior of Boron Nitride Inclusions in P122 Heat Resistant Steel
- Characterization of Mechanically Alloyed Powders for High-Cr Oxide Dispersion Strengthened Ferritic Steel
- SB-06-3(057) Change in Tensile and Creep Properties of 2.25Cr-1Mo Steel by Prolonged Exposure in Plant(Changes in Microstructure 1)
- An Asymptotic Regression Curve for Describing the Emergence Pattern of the Azuki Bean Weevil, Callosobruchus chinensis L. (Coleoptera : Bruchidae)
- Prediction of Precipitation Sequences within Grains in 18Cr-8Ni Austenitic Steel by Using System Free Energy Method
- Creep Deformation and the Corresponding Microstructural Evolution in High-Cr Ferritic Steels
- Creep Deformation and the Corresponding Microstructural Evolution in High-Cr Ferritic Steels
- Creep properties affected by morphology of MX in high-Cr ferritic steels
- Effect of Co Addition on Microstructure in High Cr Ferritic Steels
- Effect of Heat Treatment on Precipitation Kinetics in High-Cr Ferritic Steels
- SB-09-1(051) An Improvement on Creep Characteristics in Carbon Free Martensitic Alloys(Advanced Heat Resistant Steels)
- Creep Properties affected by Morphology of MX in High-Cr Ferritic Steels
- Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing W
- Improved Utilization of Added B in 9Cr Heat-Resistant Steels Containing W
- High Temperature Strength and Ductility of β/γ'/γ Multiphase Alloys in Ni-Al-Cr System
- Steam Oxidation Studies on 50Ni-50Cr HVOF Coatings on 9Cr-1Mo Steel : Change in Structure and Morphology across the Coating/Substrate Interface
- Gas Contamination due to Milling Atmospheres of Mechanical Alloying and Its Effect on Impact Strength
- Steam Oxidation Resistance of Ni-Cr Thermal Spray Coatings on 9Cr-1Mo Steel. Part 2 : 50Ni-50Cr
- Steam Oxidation Resistance of Ni-Cr Thermal Spray Coatings on 9Cr-1Mo Steel. Part 1 : 80Ni-20Cr
- Effect of Nitrogen Content on Microstructural Aspects and Creep Behavior in Extremely low Carbon 9Cr Heat-resistant Steel
- Effect of Ordering on Hydrogen Embrittlement of Ni-Cr Alloy
- Kinetics of Carbide Precipitation during Creep and Its Effect on Creep Rate of 10Cr-30Mn Austenitic Steels (Special Issue on Current Topics in Diffusional Phase Transformations)
- Precipitation of Carbides and Alpha-Tungsten in Ni-Cr-W Superalloys at 1,000℃
- Impurities and Evaluation of Induced Activity of SiC Composites Prepared with Chemical Vapor Infiltration.