Bonding Properties of Heat-polymerized Denture Base Resin to Ti-6Al-7Nb Alloy
スポンサーリンク
概要
- 論文の詳細を見る
The purpose of this study was to evaluate the shear bonding strength and leakage of heat-polymerized denture base resin to titanium-aluminum-niobium (Ti-6Al-7Nb) and cobalt-chromium (Co-Cr) castings using four adhesive systems; three adhesive primers (Metal Primer II, Metal Link, MR. Bond) and one heat-polymerized adhesive resin containing 4-META (Metadent). The resin tab was heat-polymerized directly with or without the primer. Shear bonding strengths and dye penetration distances were determined before and after 10,000 times of thermocycling. The results were analyzed with three-way ANOVA and Tukey's comparison (p<0.05). Thermocycling significantly decreased bonding strength and promoted dye penetration. However, with the application of adhesive systems, post-thermocycling bond strength was significantly improved and dye penetration was inhibited. The bonding strength of Ti-6Al-7Nb was significantly smaller than that of Co-Cr, but the difference was marginal. These results suggested that the examined adhesive systems significantly improved the bonding efficiency of heat-polymerized resin to Ti-6Al-7Nb and Co-Cr alloys.
- 日本歯科理工学会の論文
著者
-
ARKSORNNUKIT Mansuang
Department of Prosthodontics, Faculty of Dentistry, Chulalongkorn University
-
TAKAHASHI Hidekazu
Advanced Biomaterials, Graduate School, Tokyo Medical and Dental University
-
Arksornnukit Mansuang
Chulalongkorn Univ.
-
Takahashi Hidekazu
東京医科歯科大学 医歯学総合研究科包括診療歯科学講座総合診療歯科学
-
Arksornnukit Mansuang
東京医科歯科大学
-
Arksornnukit Mansuang
Department Of Prosthodontics Faculty Of Dentistry Chulalongkorn University
-
SUZUKI TETSUYA
Department of Orthopedic Surgery, Akita University School of Medicine
-
ODA Nobusuke
Department of Removable Prosthodontics, School of Dentistry, Iwate Medical University
-
HIRANO Shigezo
Complete Denture Prosthodontics, Department of Masticatory Function Rehabilitation, Division of Oral
-
Takahashi Hidekazu
Advanced Biomaterials Department Of Restorative Sciences Division Of Oral Health Sciences Graduate S
-
Oda Nobusuke
Department Of Removable Prosthodontics School Of Dentistry Iwate Medical University
-
Hirano Shigezo
Complete Denture Prosthodontics Department Of Masticatory Function Rehabilitation Division Of Oral H
-
Suzuki Tetsuya
Iwate Medical Univ. Iwate Jpn
-
Takahashi Hidekazu
Advanced Biomaterials Graduate School Of Medical And Dentistry Tokyo Medical And Dental Univ.
-
Takahashi Hidekazu
Advanced Biomaterials Department Of Restorative Sciences Tokyo Medical And Dental University
-
Oda Nobusuke
Iwate Medical Univ. Iwate Jpn
-
Takahashi Hidekazu
Oral Biomaterials Engineering Department Of Oral Materials Sciences And Technology Course Of Oral He
-
Suzuki Tetsuya
Department Of Orthopedic Surgery Akita Rosai Hospital
-
Takahashi Hidekazu
Advanced Biomaterials Department Of Restorative Science Division Of Oral Health Science Graduate Sch
-
Takahashi Hidekazu
Advanced Biomaterials Department Of Restorative Sciences Division Of Oral Health Sciences Graduate S
-
Suzuki Tetsuya
Department Of Computer Science Faculty Of Engineering Yamanashi University
関連論文
- Effects of Silane Coupling Agent Amount on Mechanical Properties and Hydrolytic Durability of Composite Resin After Hot Water Storage
- Effect of filler type and polishing on the discoloration of composite resin artificial teeth
- P-64 Effect of sizes and materials on diametral tensile strength
- P-63 Mechanical properties of enamel resin of veneering composite resin systems
- Effects of plasma treatment on the shear bond strength between fiber-reinforced composite posts and resin composite for core build-up
- Effect of NaClO Treatment on Bonding to Root Canal Dentin Using a New Evaluation Method
- Properties of a gypsum-bonded magnesia investment using a K_2SO_4 solution for titanium casting
- A Gypsum-Bonded Magnesia Investment is Available for Titanium Casting
- Effect of Ultraviolet Light Irradiation on Bonding of Experimental Composite Resin Artificial Teeth
- P-32 Evaluation of impact absorption using free falling object
- P-7 Effect of UV irradiation on bonding of experimental composite resin
- P-90 Shear bond strength of experimental denture teeth composite resin : Effect of surface treatment
- Titanium casting using Magnesia-based Gypsum-bonded investment : Part 1. Basic properties of investment
- Fundamental Studies on Ammonia-free Phosphate-bonded Binder for Dental Investments
- The Possibility of Fabricating Co-Cr Casting Plates by Using a Heat-Shock Method with Conventional Phosphate-Bonded Investments
- Two-stage Heat-Shock Procedure Can Fabricate Sound Co-Cr Casting Denture Plates by Using Conventional Phosphate-Bonded Investments
- Osteoporotic vertebral fracture adjacent to a nonsegmented hemivertebra
- Effects of Heat arid pH in Silanation Process on Flexural Properties and Hydrolytic Durabilities of Composite Resin after Hot Water Storage
- Bonding Properties of Heat-polymerized Denture Base Resin to Ti-6Al-7Nb Alloy
- Analysis of Er:YAG Lased Dentin Using Attenuated Total Reflectance Fourier Transform Infrared and X-ray Diffraction Techniques
- Effect of the Application of Soft Lining Materials under Denture Bases
- In Vitro Study of Reduction of Stress Transferred onto Tissues around Implants Using a Resilient Material in Maxillary Implant Overdentures
- Peroxyl Radical Scavenging Activity of Caffeic Acid and Its Related Phenolic Compounds in Solution
- Human osteoblast-like cell spreading and proliferation on Ti-6Al-7Nb surfaces of varying roughness
- Combined fractures of the odontoid process and upper thoracic spine : two case reports
- Magnetic resonance imaging of spinal involvement by hematopoietic malignancies requiring surgical decompression
- Combination of lumbar kyphosis, epidural lipomatosis, and perineural cyst as a cause of neurological deficit : a case report
- Outcome of One-Level Posterior Lumbar Interbody Fusion for Spondylolisthesis and Postoperative Intervertebral Disc Degeneration Adjacent to the Fusion
- Coulometric Electrochemical Detection of Phospholipid Hydroperoxides by High-performance Liquid Chromatography
- Effect of reactive adhesives on the tensile bond strength of polyvinyl siloxane impression materials to methyl methacrylate tray material
- Reinforcement effects of fiberglass on telescopic dentures using a three-dimensional finite element analysis and fracture test
- Basic Evaluation of Cast Joining for Electroformed Coping using Multi-purpose Alloys
- Effective Factors Including Periodontal Ligament on Vertical Root Fractures
- Can Insertional Torque Predict Screw Loosening and Related Failures? : An In Vivo Study of Pedicle Screw Fixation Augmenting Posterior Lumbar Interbody Fusion
- Void Formation by the Reactive Diffusion of Titanium and Aluminum Foils
- Production of TiAl Sheet with Oriented Lamellar Microstructure by Diffusional Reaction of Aluminum and Textured Titanium Foils
- Temporal Changes in Swallowing Function Caused by a Palate Covering
- In vitro testing of a denture cleaning method using ozone
- Effects of Cyclic Loading on Viscoelastic Properties of Soft Lining Materials
- Improving a Self-curing Dental Resin by Eliminating Oxygen, Hydroquinone and Water from its Curing Process
- Effects of Water Pressure during Polymerization on Mechanical Properties of Autopolymerized Resins
- Bonding durability of custom-made mouthpiece for scuba diving after water storage under pressure
- Effect of Degradation of Denture Base Resin on Bond Strength to Relining Resins
- Tensile strength of dentin after bleaching treatment
- Effect of Polymorphism of SiO_2 Addition on Mechanical Properties of Feldspathic Porcelains
- Basic evaluation on physical properties of experimental fluorinated soft lining materials
- Differentiation of MC3T3-E1 on poly(4-styrenesulfonic acid-co-maleic acid) sodium salt-coated films
- Influence of methyl mercaptan at early setting stages on the properties of self curing addition silicone resilient denture lining materials
- Influence of a denture strengthener on the deformation of a maxillary complete denture
- Anisotropy of Tensile Strengths of Bovine Dentin Regarding Dentinal Tubule Orientation and Location
- Radiopacity of Experimental Composite Resins Containing Radiopaque Materials
- Effect of mold temperatures on interface between primary and secondary castings of cast-on method for precision metal frameworks
- Formation of Oriented Lamellar Colonies in a TIAlMn Alloy Produced by a Reactive Sintering
- Reinforcement of Denture Base Resin with Short-rod Glass Fiber
- Effect of Test Method on Flexural Strength of Recent Dental Ceramics
- In vitro wear resistance, hardness and elastic modulus of artificial denture teeth
- Dimensional Accuracy and Surface Property of Titanium Casting Using Gypsum-bonded Alumina Investment
- Influence of Occlusal Vertical Dimension and Labiolingual Position of Artificial Anterior Teeth in Complete Dentures on the Facial Appearance
- Effects of surface roughness and tapered angle of cone crown telescopic system on retentive force
- Reduction of Single Fuchsian Differential Equations to Hypergeometric Systems
- Influence of Midline Position and Incisal Inclination on Esthetic Evaluation of Complete Denture Wearers
- Quantification of in vitro produced wear sites on composite resins using contact profilometry and CCD microscopy: A methodological investigation
- Palatal Coverage Disturbance in Masticatory Function
- Titanium Casting Using Commercial Phosphate-bonded Investments with Quick Heating Method
- Effect of different amounts of 3-methacryloxypropyltrimethoxysilane on the flexural properties and wear resistance of alumina reinforced PMMA
- Effects of silane coupling agents and solutions of different polarity on PMMA bonding to alumina
- A-25 Effects of third-body media and composite resin type on wear resistance of composite resins
- Silanation and Resin Composite Performance
- Hardening by Point Defects in Neutron Irradiated AIN and SiC.