Design and Fabrication of Quartz Micro-Electro-Mechanical System-Based Double-Ended Tuning Fork with Variable Sections
スポンサーリンク
概要
- 論文の詳細を見る
In this paper, we report a novel double-ended tuning fork (DETF) with variable sections. The DETF is fabricated using a quartz micro-electro-mechanical system (MEMS) technique and packaged using the flip chip technique. The central part of the vibration beam is thinned to enhance the force-frequency sensitivity but not decrease the vibration frequency. The mechanical quality factor (Q value) can also be maintained, which determines the mechanical noise performance. Three types of DETF are designed and fabricated with a fixed beam length of 4 mm. The vibration characteristics (vibration frequency, Q value, and equivalent circuit parameters) are evaluated using an impedance analyzer 4294A. The finite element method (FEM) is used to simulate the natural frequency and force-frequency sensitivity. For the natural frequencies, the experimental results agreed well with the simulation results. High Q values are achieved for all the DETFs, which are 9924, 7083, and 6335. By multiplying the force-frequency sensitivity (\Delta F) by the measured Q values, the performance of the new DETF structure can be improved by 1.9 times.
- 2011-06-25
著者
-
Ueda Toshitsugu
Graduate School Of Information Production And Systems Waseda Univ.
-
Li Xuefeng
Graduate School Of Information Production And Systems Waseda University
-
Liang Jinxing
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology, Ministry of Education, School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
-
Li Hongsheng
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology, Ministry of Education, School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
-
Ni Yunfang
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology, Ministry of Education, School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
-
Li Kunyu
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology, Ministry of Education, School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
-
Huang Libin
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology, Ministry of Education, School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
関連論文
- Sensing System for Multiple Measurements of Trace Elements Using Laser-Induced Breakdown Spectroscopy
- Differential Platinum Thin Film Hydrogen Gas Sensor Fabricated by MEMS Techniques
- Improvement of a Micro-Droplet Guiding Technique for Laser-Induced Breakdown Spectroscopy
- Low Concentration Gas Measurement Using Photonic Bandgap Fiber Cell Sensor
- Particle Element and Size Simultaneous Measurement Using LIBS
- Development of Solution Measurement Using Laser-Induced Breakdown Spectroscopy Integrated with Micro-Droplet Ejection System
- Photonic Bandgap Fiber for a Sensing Device
- Thermo-Resistive Platinum Thin Film Hydrogen Gas Sensor Fabricated by MEMS Techniques
- Fabrication of Two-Axis Quartz MEMS-Based Capacitive Tilt Sensor
- Wet Etched High Aspect Ratio Microstructures on Quartz for MEMS Applications
- In-situ Measurement for Gas Concentrations using Tunable Lasers
- Deblur of Radially Variant Blurred Image for Single Lens System
- Development of Highly Integrated Quartz Micro-Electro-Mechanical System Tilt Sensor
- Thermomechanical Fatigue Performance of Lead-Free Chip Scale Package Assemblies with Fast Cure and Reworkable Capillary Flow Underfills (Special Issue : Advanced Metallization for ULSI Applications)
- Board-Level Solder Joint Reliability of Edge- and Corner-Bonded Lead-Free Chip Scale Package Assemblies Subjected to Thermal Cycling (Special Issue : Solid State Devices and Materials (2))
- Development of Carbonaceous Particle Size Analyzer Using Laser-induced Incandescence Technology
- Design and Fabrication of Quartz Micro-Electro-Mechanical System-Based Double-Ended Tuning Fork with Variable Sections
- Vibration Analysis of Original Shape Quartz Resonator for High Quality Factor Realization
- High-Sensitivity Fiber-Optic Fabry--Perot Interferometer Temperature Sensor
- Fabrication of Photonic Bandgap Fiber Gas Cell Using Focused Ion Beam Cutting
- Doubled Optical Path Length for Photonic Bandgap Fiber Gas Cell Using Micromirror
- Damping Characteristics of Quartz Tilt Sensor with Nonparallel Comb Electrode