Anchoring Strength of Thin Aligned-Polymer Films Formed by Liquid Crystalline Monomer
スポンサーリンク
概要
- 論文の詳細を見る
We have evaluated the polar anchoring strength of a thin molecule-aligned polymer film formed by a liquid crystalline monomer. The polymer film was obtained by photopolymerization of the monomer oriented by a rubbed polyimide alignment layer in a chamber filled with N2 gas. We fabricated a nematic liquid crystal cell using the thin aligned-polymer films as alignment layers, and then evaluated the anchoring strength of the polymer by measuring the optical retardation curve of the cell driven by voltages. The experimental result showed that the anchoring strength was one order of magnitude lower than that of a conventional rubbed polyimide alignment layer, and decreased with increasing the cure temperature of the monomer film.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2003-04-15
著者
-
FUJIKAKE Hideo
NHK Science & Technical Research Laboratories
-
MURASHIGE Takeshi
Tokyo University of Science
-
IKEHATA Seiichiro
Tokyo University of Science
-
Sato Fumio
Nhk Science & Technical Research Laboratories
-
Murashige Takeshi
Tokyo University of Science, 1-3 Kagurazaka, Shinjuku, Tokyo 162-8610, Japan
-
Ikehata Seiichiro
Tokyo University of Science, 1-3 Kagurazaka, Shinjuku, Tokyo 162-8610, Japan
-
Fujikake Hideo
NHK Science and Technical Research Laboratories, 1-10-11 Kinuta, Setagaya, Tokyo 157-8510, Japan
関連論文
- One-Step Grown Lateral p-n Junctions on GaAs (001) Patterned Substrates with (110) Sidewalls by Molecular Beam Epitaxy
- Spatially Resolved Detection of Electroluminescemce from Lateral p-n unctions on GaAs (111)A Patterned Substrates Using a Near-Field Scanning Optical Microscope
- Raman Spectroscopy and Positron Lifetime Studies of Structural Relaxation and Defect Evolution in Amorphous Silicon
- Role of Vacancy-Type Defects during Structural Relaxation of Amorphous Si
- Characteristics of a New High-Sensitivity X-Ray Imaging Tube for Video Topography
- Solid-Phase Epitaxy with X-Ray Irradiation to Grow Dislocation-Free Silicon Films at Low Temperatures
- Bending Toerance of Ferroeectric iquid Crysta with Poymer Was Fastening Pastic Substrates
- Thermal Shock Tolerance of Ferroelectric Liquid Crystal Stabilized by Aligned Polymer Fibers
- Polarization Raman Spectral Microscopy of Polymer Fibers Formed in Ferroelectric Liquid Crystal
- Organic Thin-Film Transistors on a Plastic Substrate with Anodically Oxidized High-Dielectric-Constant Insulators
- Bend-Mode Liquid Crystal Cells Stabilized by Aligned Polymer Walls
- Light-Controllable Spot Luminaires Using a Liquid Crystal Light Shutter and a High-Intensity Discharge Lamp
- Heat-Resistant Liquid Crystal Light Modulator Containing Polymer Network for High-Power Luminaires
- Optical Characterization of GaAs and GaP Laser-Annealed in High-Pressure Ar Atmosphere
- Polymer Alignment Behavior with Molecular Switching of Ferroelectric Liquid Crystal
- Electrically-Controllable Loquid Crystal Polarizing Filter For Eliminating Reflected Light
- Small Liquid Crystal Droplet Formation of Polymer-Dispersed Liquid Crystal under Ultraviolet Light Irradiation without Short Wavelength Component
- Polymer-Stabilized Ferroelectric Liquid Crystal Devices with Grayscale Memory
- Grayscale-Memory Spatial Light Modulator with Polymer-Dispersed Phase-Transition Liquid Crystal
- Polarization Raman Microscopic Study of Molecular Alignment Behavior in Liquid Crystal/Polymer Composite Films
- Liquid Crystal Alignment Control Using Polymer Filament and Polymer Layers Coated on Substrates
- Polymer Wall Formation Using Liquid-Crystal/Polymer Phase Separation Induced on Patterned Polyimide Films
- Self-Restoration by Smectic Layer Structures of Monostable Ferroelectric Liquid Crystal in Flexible Devices
- Light Diffraction of Aligned Polymer Fibers Periodically Dispersed by Phase Separation of Liquid Crystal and Polymer
- Improvement of Characteristics of Organic Thin-Film Transistor with Anodized Gate Insulator by an Electrolyte Solution and Low-Voltage Driving of Liquid Crystal by Organic Thin-Film Transistors
- Rollable Polymer-Stabilized Ferroelectric Liquid Crystal Device Using Thin Plastic Substrates
- Fabrication of Extended Porous Polymer Films for Aligning Nematic Liquid Crystal
- Flexible Grayscale Ferroelectric Liquid Crystal Device Containing Polymer Walls and Networks
- Relationship between Spatial Resolution and Electrooptic Thresholding in Polymer-Dispersed Liquid Crystals
- Fluorinated Polymer Alignment Layers Formed at Low Temperature for Plastic-Substrate-Based Liquid Crystal Devices : Structure and Mechanical and Thermal Properties of Condensed Matter
- Rigid Formation of Aligned Polymer Fiber Network in Ferroelectric Liquid Crystal
- Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques
- Liquid Crystal Display Cells Fabricated on Plastic Substrate Driven by Low-Voltage Organic Thin-Film Transistor with Improved Gate Insulator and Passivation Layer
- Orientation-Controlled Growth of Pentacene Single Crystal Films on an Alignment Layer Using Liquid Crystal as Solvent
- Photopolymerization-Induced Phase Separation Process of Thin Composite Films of Liquid Crystal and Polymer Fiber Networks
- Relationship of Polymer Molecular Weight and Cure Temperature in Photopolymerization-Induced Phase Separation of Liquid Crystal and Polymer Fiber Networks : Optics and Quantum Electronics
- Smectic Layer Deformation of Ferroelectric Liquid Crystal Sandwiched between Polymer Walls with Anchoring Effects
- New Driving Scheme to Improve Hysteresis Characteristics of Organic Thin Film Transistor-Driven Active-Matrix Organic Light Emitting Diode Display
- Anchoring Strength of Thin Aligned-Polymer Films Formed by Liquid Crystalline Monomer
- Influence of Substrate Surfaces on Thermal Behavior of Photopolymerization-Induced Phase Separation of Liquid Crystal and Polymer
- Infrared- and Visible-Light-Sensitive Spatial Light Modulator Using Pigment-Dispersed Organic Photoconductor
- A New Method of Characterizing Crystals, Using a Vibrating Light Spot
- Polarization Raman Spectral Microscopy of Polymer Fibers Formed in Ferroelectric Liquid Crystal
- Analysis of the Influence of Sputtering Damage to Polymer Gate Insulators in Amorphous InGaZnO4 Thin-Film Transistors
- Self-Restoration by Smectic Layer Structures of Monostable Ferroelectric Liquid Crystal in Flexible Devices
- Liquid Crystal Alignment Control Using Polymer Filament and Polymer Layers Coated on Substrates
- Polymer Wall Formation Using Liquid-Crystal/Polymer Phase Separation Induced on Patterned Polyimide Films
- Anchoring Strength of Thin Aligned-Polymer Films Formed by Liquid Crystalline Monomer
- Bend-Mode Liquid Crystal Cells Stabilized by Aligned Polymer Walls
- Organic Thin-Film Transistors on a Plastic Substrate with Anodically Oxidized High-Dielectric-Constant Insulators
- Nematic Liquid Crystal Alignment Behaviors between Crossed Stretched Miropolymer Filaments with Anchoring Effects
- Orientation-Controlled Growth of Pentacene Single Crystal Films on an Alignment Layer Using Liquid Crystal as Solvent
- Liquid Crystal Display Cells Fabricated on Plastic Substrate Driven by Low-Voltage Organic Thin-Film Transistor with Improved Gate Insulator and Passivation Layer
- Improvement of Characteristics of Organic Thin-Film Transistor with Anodized Gate Insulator by an Electrolyte Solution and Low-Voltage Driving of Liquid Crystal by Organic Thin-Film Transistors
- Influence of Oxide Semiconductor Thickness on Thin-Film Transistor Characteristics
- Photopolymerization-Induced Phase Separation Process of Thin Composite Films of Liquid Crystal and Polymer Fiber Networks
- Thermal Shock Tolerance of Ferroelectric Liquid Crystal Stabilized by Aligned Polymer Fibers
- Influence of Substrate Surfaces on Thermal Behavior of Photopolymerization-Induced Phase Separation of Liquid Crystal and Polymer
- Polymer Alignment Behavior with Molecular Switching of Ferroelectric Liquid Crystal