Thermal Properties of Al/<I>β</I>-SiC Composite Fabricated in Continuous Solid-Liquid Co-Existent State by SPS
スポンサーリンク
概要
- 論文の詳細を見る
<I>β</I>-SiC-particle-dispersed-aluminum (Al) matrix composite was fabricated in the solid-liquid co-existent state by the Spark Plasma Sintering (SPS) process from the mixture of <I>β</I>-SiC powders, Al powders and Al-5 mass% Si powders. The microstructures and thermal conductivities of the composites fabricated were examined. These composites were all well consolidated by heating at a temperature range between 798 K and 876 K for 1.56 ks during the SPS process. No reaction at the interface between the <I>β</I>-SiC particle and the Al matrix was observed by scanning electron microscopy for the composites fabricated under the sintering conditions employed in the present study. The relative packing density of the Al/<I>β</I>-SiC composite fabricated was higher than 99 % in a volume fraction range of SiC between 40 % and 50 %. Thermal conductivity of the Al/<I>β</I>-SiC composite was higher than 200 W/mK in a <I>β</I>-SiC volume fraction range between 40 and 50 vol%. The highest thermal conductivity was obtained for Al-45 vol% <I>β</I>-SiC composite and reached 216 W/mK. The coefficient of thermal expansion of the composites falls in the upper line of Kerner's model, indicating strong bonding between the <I>β</I>-SiC particle and the Al matrix in the composite.
著者
-
井上 漢龍
ワシントン大学
-
水内 潔
大阪市立工業研究所
-
長岡 亨
大阪市立工業研究所
-
田中 基博
大阪市立工業研究所
-
武内 孝
大阪市立工業研究所
-
杉岡 正美
大阪市立工業研究所
-
井上 漢龍
ワシントン大学材料科学工学科
-
谷 淳一
大阪市立工業研究所
-
上利 泰幸
大阪市立工業研究所
-
川原 正和
富士電波工機(株)
-
巻野 勇喜雄
富士電波工機(株)
-
井藤 幹夫
大阪大学大学院
関連論文
- ビス(4,4'-メルカプトフェニル)スルフィドから合成したポリチオエステルとそれを添加したPETアロイの金属に対する接着性
- 106 TiNi 形状記憶合金薄肉円管の引張り・ねじり組合せ負荷試験
- パルス通電加圧法を用いたカーボンナノファイバー分散/B_4Cナノコンポジットの合成同時焼結と機械的特性
- 放電プラズマ法(SPS)によるW添加ZrB_2の合成同時焼結とその機械的特性
- 309 銅ナノ粒子を用いた低温接合プロセス(固相接合・表面改質,平成20年度春季全国大会)
- A1070のフラックスレス超音波はんだ付
- 333 C1020/A1050の摩擦攪拌接合(FSW (V),平成18年度春季全国大会)
- C1020/A1050の摩擦攪拌接合
- 冷間加工されたFe-8mass%Al合金の振動減衰能および引張特性におよぼす焼きなまし温度の影響 (報文特集)
- 527 放電プラズマ焼結法(SPS)により作製したダイヤモンド粒子分散型銅基複合材料の熱伝導性に及ぼす製造条件の影響(複合機能化材料・デバイスとその加工プロセス1)