Equilibrium Distribution Ratios of Phosphorus and Chromium between BaO-MnO Melts and Carbon Saturated Fe-Cr-Mn Alloys at 1 573 K.
スポンサーリンク
概要
- 論文の詳細を見る
The phosphorus, manganese, and chromium distribution ratios between BaO-MnO fluxes and liquid Fe-Cr-Mn-C<SUB>satd.</SUB> alloys have been measured at 1573 K by using a chemical equilibration technique. The distribution ratio of phosphorus between BaO-MnO fluxes and liquid Fe-Cr-Mn-C<SUB>satd.</SUB> alloys decreases and those of chromium and manganese are nearly constant with increasing chromium content of the metal. With increasing the BaO content of flux the phosphorus distribution ratio is found to increase. The chromium distribution slightly increases and that of manganese decreases at the same time. The possibility of dephosphorization of Fe-Cr-Mn-C<SUB>satd.</SUB> melts by using BaO-MnO fluxes is discussed.
- The Iron and Steel Institute of Japanの論文
著者
-
Morita Kazuki
Department Of Biochemistry And Food Science Faculty Of Agriculture Kagawa University
-
Sano Nobuo
Department Of Metallurgy Graduate School Of Engineering The University Of Tokyo
-
Tsukihashi Fumitaka
Department Of Advanced Material Science The University Of Tokyo
-
Kunikata Yasunobu
Graduate Student, Department of Metallurgy, The University of Tokyo
-
Tsukihashi Fumitaka
Department of Metallurgy, The University of Tokyo
関連論文
- Thermodynamic Property of B in Molten Si and Phase Relations in the Si-Al-B System
- Temperature Coefficient of Surface Tension and their Comparison for Molten tin at Different Oxygen Potentials of the Measured Conditions
- A Practical Method for Measuring Deoxynivalenol, Nivalenol, and T-2 + HT-2 Toxin in Foods by an Enzyme-linked Immunosorbent Assay Using Monoclonal Antibodies
- The Effect of Na_2O and Al_2O_3 on Dephosphorization of Molten Steel by High Basicity MgO Saturated CaO-FeO_x-SiO_2 Slag
- Interfacial Kinetics of Nitrogen with Molten Iron Containing Sulfur
- Dynamic Interfacial Phenomena between Gas, Liquid Iron and Solid CaO during Desulfurization
- Characterization of Fibrous Particles in Blast Furnace Slag Quenched by Water-spray
- Solubility of Chlorine in Aluminosilicate Slag Systems
- Activities of FeO in CaO-Al_2O_3-SiO_2-FeO and CaO-Al_2O_3-CaF_2-FeO Slags
- Measurement of Nitrogen Dissolution Rate into Molten Alloys by Isotope Exchange Technique (高温質量分析特集号)
- Effects of Oxygen and Nitrogen on the Rate of Nitrogen Dissolution in Iron-Chromium and Iron-Vanadium Alloys
- Chloride Capacities of CaO-SiO_2-Al_2O_3(-FeO, Mgo, MnO) Slags and Their Application in the Incineration Processes
- Activity Measurement of CaO-SiO_2-AlO_-MgO Slags Equilibrated with Molten Silicon Alloys
- A Newly Developed Method for Determining SiO_2 Activity of the Silicate Slags Equilibrated with Molten Silicon Alloys
- Thermodynamic Properties of Si-Al,-Ca, -Mg Binary and Si-Ca-Al, -Ti, -Fe Ternary Alloys
- Solubility of TiO_2 in Iron Saturated FeO-FeS Melts
- Resurrection of the iron and phosphorus resource in steel-making slag
- The Heating Characteristics of Cao-Sio_2-Fe_tO System Slags under Microwave Irradiation
- Thermodynamic Properties of the SiO_2-GeO_2 and Pt-rich Pt-Ge Systems at 1623 and 1723K
- Activity of AlO_ for the CaO-AlO_-CeO_ System at 1773K
- Carbothermic Reduction of MgO by Microwave Irradiation
- Wettability and Interfacial Permeability between Prereduced Ilmenite and Molten Pig Iron
- Solubility of TiO_2 in Fe_-FeS Melts
- Dissolution Behavior of Solid 5CaO・SiO_2・P_2O_5 in CaO-SiO_2-FeO_x Slag
- Condensation of P_2O_5 at the Interface between 2CaO・SiO_2 and CaO-SiO_2-FeO_x-P_2O_5 Slag
- Thermodynamics of the MnO-SiO_2-TiO_2 System at 1673 K
- Effect of Simultaneous Addition of Al_2O_3 and MgO on the Liquidus of the CaO-SiO_2-FeO_x System with Various Oxygen Partial Pressures at 1573K
- Reduction Extraction Kinetics of Titania and Iron from an Ilmenite by H_2-Ar Gas Mixtures
- Removal of Antimony from Liquid Copper by Using CuCl-Na_2CO_3 Fluxes at 1423K
- Mechanisms of Oxidation and Vaporization of Antimony from Liquid Copper with CuCl-CaO Fluxes
- Chlorination Kinetics of ZnFe_2O_4 with Ar-Cl_2-O_2 Gas
- Removal of Zn and Pb from Fe_2O_3-ZnFe_2O_4-ZnO-PbO Mixture by Selective Chlorination and Evaporation Reactions
- Evaporation Kinetics of the Molten PbCl_2-ZnCl_2 System from 973 to 1073K
- Oxygen Exchange Reaction between CO_2-CO Gas and Molten Oxide Containing Iron Oxide
- Evaluation of Surface Tension and Adsorption for Liquid Fe-S Alloys
- Interfacial Phenomena Between Gas, Liquid Iron and Sold Lime During Desulfurization
- Determination of Macro-Contact Angle and Line Tension at High Temperatures for Au/Al_2O_3 System at 1373K Using a Micro-Scale Wetting Method
- Thermodynamics of the MnO-Al_2O_3-TiO_2 System
- Three-dimensional Compressible Flow Simulation of Top-blown Multiple Jets in Converter
- Exergy Analysis of Steel Production Processes
- Thermal Conductivity of the CaO-Al_2O_3-SiO_2 System
- Reaction Behavior of P_2O_5 at the Interface between Solid 2CaO・SiO_2 and Liquid CaO-SiO_2-FeO_x-P_2O_5 Slags Saturated with Solid 5CaO・SiO_2・P_2O_5 at 1573K
- Modeling of Three-phase Flows and Behavior of Slag/Steel Interface in an Argon Gas Stirred Ladle
- Large Eddy Simulation on Flow Structure in Centrifugal Flow Tundish
- Formation Reaction of Phosphate Compound in Multi Phase Flux at 1573K
- Partition Equilibria of Lead and Antimony between Liquid Copper and MgO Saturated Cu_2O-SiO_2, Cu_2O-CaO and Cu_2O-CaO-SiO_2 Systems
- Reaction Mechanism between Solid CaO and FeO_x-CaO-SiO_2-P_2O_5 Slag at 1 573K
- Chlorination and Evaporation Behaviors of PbO-PbCl_2 System in Ar-Cl_2-O_2 Atmosphere
- Thermodynamic and Structural Properties for the FeO-SiO_2 System by using Molecular Dynamics Calculation
- Calculation of Thermodynamic Properties and Phase Diagrams for the CaO-CaF_2, BaO-CaO and BaO-CaF_2 Systems by Molecular Dynamics Simulation
- Melting and Solidifying Behaviors of the CaO-SiO_2-FeO_x Slags at Various Oxygen Partial Pressures
- Vapor Pressure Measurements for the FeCl_2-ZnCl_2 System by the Transpiration Method
- Thermodynamics of Molten Fe-Cr-C_ Alloy
- Vapor Pressure Measurement of Zinc Oxychloride
- 287 Phosphorus partitions between carbon-saturated iron melts and CaO-CaF_2-SiO_2-MnO slags(STEELMAKING, The 108th ISIJ Meeting)
- The Activity of Calcium in Calcium-Calcium Halide Fluxes
- Effects of Electromagnetic Brake on Vortex Flows in Thin Slab Continuous Casting Mold
- Measurements of Thermodynamic Properties of Iron in Molten Silicon by Knudsen Effusion Method
- Vortexing Flow Patterns in a Water Model of Slab Continuous Casting Mold
- Influences of Oxide Additions on Formation Reaction of Iron Carbide at 1023K
- Molecular Dynamics Simulation of the Thermodynamic and Structural Properties for the CaO-SiO_2 System
- Separation of Fe, Co and Ni from molten Ni-based alloy by MgO-saturated FeO_x-MgO-SiO_2 slag
- Refining of Si by the Solidification of Si-Al Melt with Electromagnetic Force
- Distribution Equilibria of Fe, Co and Ni between MgO-saturated FeO_x-MgO-SiO_2 Slag and Ni Alloy
- Effect of Static Magnetic Field Application on the Mass Transfer in Sequence Slab Continuous Casting Process
- Modeling of Circulating Flow in RH Degassing Vessel Water Model Designed for Two-and Multi-legs Operations
- Numerical Estimation of the Effect of the Magnetic Field Application on the Motion of Inclusion in Continuous Casting of Steel
- The Effect of B_2O_3 on Dephosphorization of Molten Steel by FeO_x-CaO-MgO_-SiO_2 Slags at 1873K
- The Distribution of Manganese and Sulfur between CaO Saturated CaO-FeO-SiO_2 Slags and Molten Iron
- Preface
- Determination of the Rate of CO_2 Dissociation on the Surface of CaO-SiO_ CaO-Al_2O_ CaO-SiO_2-CaF_2 and CaO-SiO_2-Fe_xO Melts
- Effect of Rotating Magnetic Field on Two-phase Flow in RH Vacuum Degassing Vessel
- Solubilities of Al2O3, SiO2 and Cr2O3 in the FeS Containing Systems
- The Solubility of MgO in Molten MgCl_2-CaCl_2 Salt
- Changing Behavior of Non-metallic Inclusions in Solid Iron Deoxidized by Al-Ti Addition during Heating at 1473 K
- Wettability of Sn-Zn, Sn-Ag-Cu and Sn-Bi-Cu Alloys on Copper Substrates
- Current, Magnetic Field and Joule Heating in Electroslag Remelting Processes
- Radiative Heat Transfer Behavior of Mold Fluxes for Casting Low and Medium Carbon Steels
- Effects of the Seaweed Bed Construction Using the Mixture of Steelmaking Slag and Dredged Soil on the Growth of Seaweeds
- Dissolution Mechanism of Various Elements into Seawater for Recycling of Steelmaking Slag
- Interfacial Rate of CO2–CO Reaction with the Solid Iron and Iron Oxide by Isotope Exchange Technique at 1273 K
- Wettability between Molten Slag and MgO–C Refractories for the Slag Splashing Process
- Modeling of Transient Two-Phase Flow in a Continuous Casting Mold Using Euler-Euler Large Eddy Simulation Scheme
- Effect of Nitrogen on the Formation and Evolution of Non-Metallic Inclusions in Fe–Al–Ti–N Alloy
- Equilibrium Partitions of Manganese and Phosphorus between BaO-BaF2 Melts and Carbon Saturated Fe-Mn Melts.
- Phosphorus Partition between CaOsatd.-BaO-SiO2-FetO Slags and Liquid Iron at 1873K.
- Current, Magnetic Field and Joule Heating in Electroslag Remelting Processes
- Equilibrium Distribution Ratios of Phosphorus and Chromium between BaO-MnO Melts and Carbon Saturated Fe-Cr-Mn Alloys at 1 573 K.
- Interfacial Rate of CO_2-CO Reaction with the Solid Iron and Iron Oxide by Isotope Exchange Technique at 1273 K