Preparation of total VOC sensor with sensor-response stability for humidity by noble metal addition to SnO2
スポンサーリンク
概要
- 論文の詳細を見る
Noble metals addition to SnO2 was examined in order to develop high sensitive total volatile organic compounds (T-VOC) sensors with high stability for humidity. The noble metals loaded SnO2 thick films were prepared, and their sensor responses were measured for various kinds of VOC gases and a T-VOC test gas. The results of the measurements for various kinds of VOC gases showed that simultaneous addition of Pt, Pd and Au or simultaneous addition of Pt and Au were useful for sensitization for VOC gases giving a small response for the unloaded SnO2 thick films. These sensors could detect 0.056 ppm of the T-VOC test gas, and the sensor responses increased with increasing the concentration of the T-VOC test gas. The series of additives with Pd was effective to improve the stability for humidity. The sensor loaded with Pt, Pd and Au simultaneously satisfied both high sensitivity to the T-VOC test gas and sensor-response stability for humidity. The results of X-ray photoelectron spectroscopy of the sensor showed that most of loaded palladium exists as PdO. In addition, it was suggested by the shift of binding energy of a Sn3d orbit and an O1s orbit that the electronic sensitization was dominant in the sensor. It was supposed that the electronic sensitization was effective for the sensor response stability for humidity. From these results, the combination of the chemical sensitization by Pt-Au addition and the electronic sensitization by Pd addition gives high sensitivity to the T-VOC test gas and stability for humidity to the Pt-Pd-Au loaded SnO2 thick films, and it is expected that the SnO2 thick film with Pt, Pd and Au will be applicable to T-VOC gas sensor.
著者
-
Matsubara Ichiro
National Institute Of Advanced Industrial Science And Technology
-
Itoh Toshio
National Inst. Of Advanced Industrial Sci. And Technol. (aist)
-
KADOSAKI Masahiro
Toyama Industrial Technology Center
-
SAKAI Yuichi
Toyama Industrial Technology Center
-
Matsubara Ichiro
National Institute Of Advanced Industrial Science And Technology (aist)
-
Matsubara Ichiro
National Inst. Of Advanced Industrial Sci. And Technol.
-
Itoh Toshio
National Institute of Advanced Industrial Science and Technology (AIST)
関連論文
- Physicochemical properties and microstructures of core-shell type cerium oxide/organic polymer nanospheres
- Preparation of core-shell type cerium oxide/polymer hybrid nanoparticles for ink-jet printing
- Electrical and Thermal Transport Properties in Layer-Structured (ZnO)_mIn_2O_3(m = 5 and 9) Ceramics
- XPS study of organic/MoO3 hybrid thin films for aldehyde gas sensors: correlation between average Mo valence and sensitivity
- Thermoelectric hydrogen sensors using Si and SiGe thin films with a catalytic combustor
- Pt catalytic effects on a resistive oxygen sensor using Ce0.9Zr0.1O2 thick film in rich conditions
- Ceramic catalyst combustors of Pt-loaded-alumina on microdevices
- ^C CP/MAS NMR Study of Cross-linked Poly(vinylpyrrolidone) on Surface of Cerium Oxide Nanoparticles
- Analytical Study of Resistance Drift Phenomena on (PANI)_xMoO_3 Hybrid Thin Films as Gas Sensors
- Controlled Synthesis of Monodispersed Cerium Oxide Nanoparticle Sols Applicable to Preparing Ordered Self-Assemblies
- Monitoring of dispensed fluid with the quartz crystal microbalance (QCM) for the better control of inkjet or dispenser machine(Global Innovation in Advanced Ceramics)
- Layered Hybrid Thin Film of Molybdenum Trioxide with Poly(2,5-dimethylaniline) for Gas Sensor Sensitive to VOC Gases in ppm Level
- Catalyst Combustors with B-Doped SiGe/Au Thermopile for Micro-Power-Generation
- Platinum Micro-Hotplates on Thermal Insulated Structure for Micro-Thermoelectric Gas Sensor
- Preparation of Polystyrene and Surfactant Co-intercalated MoO_3 Nano Hybrids and their VOC Gas Sensing Properties
- Synthesis and Gas Sensing Properties of Polypyrrole/MoO_3-Layered Nanohybrids
- Thermoelectric Performance of Magnetically c-Axis Aligned Ca-based Cobaltites
- Synthesis and Thermoelectric Properties of Magnetically c-Axis-Oriented [Ca_2CoO_]_CoO_2 Bulk with Various Oxygen Contents
- Preparation of total VOC sensor with sensor-response stability for humidity by noble metal addition to SnO2
- Preparation and characterization of a layered molybdenum trioxide with poly(o-anisidine) hybrid thin film and its aldehydic gases sensing properties
- Crystal Growth of Thermoelectric Material Na_xCoO_ by a Flux Method : Structure and Mechanical and Thermal Properties of Condensed Matter
- Development of SnO_2-based Gas Sensors for Detection of Volatile Organic Compounds
- Preparation of Textured BaTiO3 Thick Films by Screen Printing
- Preparation of (Ba,Sr)TiO3 Thick Films with Ni Electrodes by Screen Printing
- Thin film processing of MoO3 based hybrid materials
- Preparation of BaTiO3 Thick Films by Inkjet Printing on Oxygen-Plasma-Modified Substrates
- Cross-Section Analysis by Electron Backscatter Diffraction of Textured BaTiO3 Thick Films Prepared by Screen Printing
- Preparation of Ba(Ti,Zr)O3 Thick Films on Silicon Substrate by Screen Printing
- Preparation of (Ba,Sr)TiO3 Thick Film on ZrO2 Substrates by Inkjet Printing
- Preparation of Ba(Ti,Zr)O3 Thick-Film Microactuators on Silicon Substrates by Screen Printing
- Electric Properties of [(BaO)1.00(XO)x](Ti0.95Zr0.05)O2 ($\textit{X} = \text{Ca}$, Sr, Ba) Ceramics Fired under Reduced Atmosphere
- Preparation of ($1-x$)(Ba,Sr)TiO3–$x$MgTiO3 Based Thick Films by Inkjet Printing
- Synthesis and Thermoelectric Properties of Magnetically $c$-Axis-Oriented [Ca2CoO3-δ]0.62CoO2 Bulk with Various Oxygen Contents
- Fabrication Technique for Preparing Nanogap Electrodes by Conventional Silicon Processes