Noncontact Guide for a Change Part in Traveling Direction of Traveling Elastic Steel Plate Using Electromagnetic Force : Basic Research on Acceleration and Deceleration(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-
スポンサーリンク
概要
- 論文の詳細を見る
Recently, along with high-end products, users have demanded high-quality and high-value-added steel plates manufactured by the continuous steel plate process. In factories, a continuous thin steel plate subjected to iron and steel processes is supported on a series of rollers during processes such as rolling; the thin steel plate moves on the rollers at a speed of 10 m/s or more. In the plating process, the steel plate is conveyed 20-50 m in the vertical direction for drying, during which steel plates are negligibly supported by rollers and other mechanisms. Therefore, plating nonuniformity due to vibration and other factors prevents the increase in productivity. To solve this problem, we developed a new noncontact guide system for parts of the steel plate at which its traveling direction changes by applying an electromagnetic force from the direction of the edge of the thin steel plate, and experimentally examined the effectiveness of the system.
- 東海大学の論文
著者
-
KASHIWABARA Ken
Course of Mechanical Engineering
-
OSHINOYA Yasuo
Department of Prime Mover Engineering
-
ISHIBASHI Kazuhisa
Department of Mechanical Engineering, School of Engineering II
-
Oshinoya Y
Department Of Mechanical Engineering Faculty Of Engineering Tokai University
-
Oshinoya Yasuo
Department Of Mechanical Engineering Faculty Of Engineering Future Science And Technology Joint Rese
-
Ishibashi Kazuhisa
Department Of Mechanical Engineering Faculty Of Engineering Ii Tokai University
関連論文
- Use of Active Seat Suspension to Improve Ride Comfort during Travel on Gravel Roads
- Psychological and Physiological Effects of Active Seat Suspension on Ride Comfort of Small Vehicles
- Fundamental Considerations on Noncontact Guide System Using Electromagnetic Forces for Changing Traveling Directions in High-Speed Traveling Steel Plate Process(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Fundamental Considerations on Noncontact Guide System Using Electromagnetic Forces for Changing Traveling Directions in High-Speed Traveling Steel Plate Process
- Simulation Study on Active Seat Suspension for a Small Vehicle(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY : 2002-2003)
- Simulation Study on Active Seat Suspension for a Small Vehicle(SCHOOL OF ENGINEERING)
- Ride Comfort Evaluation of a Small Vehicle Seat Suspension Based on Subjective Judgement(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Non-contact support system for travelling elastic steel plate
- Effect of Magnetic Force Applied to Edge of Steel Plate on Its Vertical Vibration(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Noncontact Guide for a Change Part in Traveling Direction of Traveling Elastic Steel Plate Using Electromagnetic Force : Basic Research on Acceleration and Deceleration(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-
- Basic Research on Electromagnetic Edge Control for a Traveling Continuous Steel Plate : Application of Sliding Mode Control(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY : 2002-2003)
- Fundamental Research on Optimal Position of Permanent Magnets in Magnetic Levitation Control System for Thin Steel Plate
- Noncontact Guide for Traveling Continuous Steel Plates Using Electromagnets Placed Asymmetrically at the Positions Where Traveling Direction of Plate Changes
- Computer Simulation of Magnetic Levitation of Steel Plate
- Experimental Considerations on Levitation Control of a Steel Plate with Free Edges Supported by Permanent Magnets and Electromagnets
- Study on Operability and Riding Comfort for Truck Using an Active Seat Suspension : Experimental Considerations for One-Degree-of-Freedom Control System
- Optimal Design of Riding Comfort for Heavy Duty Truck Using an Active Seat Suspension : Experimental Considerations for One-Degree-of-Freedom Control System
- Levitation Control of a Steel Plate with Free Edges Supported by Electromagnets : Theoretical Considerations on Spillover of Elastic Vibration
- Computer Simulation on Levitation Control of a Steel Plate with Free Edges Supported by Permanent Magnets and Electromagnets
- Consideration on the Influence of Permanent Magnets in Elasticity Vibration of a Thin Steel Plate
- Study on Vibration Control with a Linear Induction Motor
- Simulation Study on Application of Neural Network to Identification of Suspension System
- Consideration on Elastic Vibration Control of a Magnetically Levitated Thin Steel Plate Using Sliding Mode Control
- Experimental Consideration on Vibration Suppression Control of a Magnetically Levitated Thin Steel Plate Using Sliding Mode Control(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Vibration of Thin Steel Plate Under Magnetic Field Using Permanent Magnets(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Disturbance Cancellation Control of Electromagnetic Levitation System for Thin Steel Plate : Basic Research on Rigid Steel Plate(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Vibration isolation control of electromagnetic levitation system for thin steel plate : Basic research on rigid steel plate(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Basic examination on elastic vibration control of an electromagnetic levitation system for thin steel plate(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY -2003-2004-)
- Experimental Consideration on Vibration Suppression Control of a Magnetically Levitated Thin Steel Plate Using Sliding Mode Control
- Vibration of Thin Steel Plate Under Magnetic Field Using Permanent Magnets
- Horizontal Uniaxial Noncontact Positioning Control for a Magnetic Levitated Steel Plate : Basic Research during Conveyance(ABSTRACTS OF PROCEEDINGS OF THE SCHOOL OF ENGINEERING SERIES J TOKAI UNIVERSITY : 2002-2003)
- Study on Noncontact Support and Transportation of a Rectangular Thin Steel Plate
- Study on Noncontact Support and Transportation of a Thin Steel Plate
- Levitation Control of a Steel Plate with Free Edges Supported by Electromagnets
- Noncontact Vibration Control of Magnetic Levitated Rectangular Thin Steel Plate(Special Issue on Advances in Dynamics and Design of Continuous Systems)
- Experimental Study on Active Suspension of Truck Seat Using Sliding Mode Control
- Simulation Study on Active Suspension of Truck Seat Using Sliding Mode Control
- Simulation Study on Active Suspension of Truck Seat Using H∞ Control Theory
- Non-Contact Guide for Traveling Continuous Steel Plates in Loop Shaping Part Using Electromagnetic Force : (1st Report, Fundamental Experiments on Positioning Performance)
- Basic Study on Noise Reduction Technology for Small Vehicle with Giant Magnetostrictive Actuator
- Vibroacoustic Coupling of a Cylindrical Enclosure with an Excited End Plate
- Vibroacoustic coupling of cylindrical enclosure with excited end plates
- Basic Study on Bending Levitation Control for Flexible Steel Plate Using Electromagnetic Force
- Skid Control of Small Electric Vehicle with Hybrid Brake System : Effect of ABS and Regenerative Brake on Turning Motion
- Experimental Examination of Riding Comfort Improvement with Active Seat Suspension of Small Vehicle during Driving on a Bad Road : Comparison of Control Performance by a Trade-Off Curve
- Ride Comfort Evaluation of Active Seat Suspension for Small Vehicles Using Psychology and Physiology : Fundamental Consideration by Analysis of Heart Rate Fluctuation and Salivary Amylase Activity