Tooth Brush Abrasion of Paint-on Resins for Shade Modification of Crown and Bridge Resins
スポンサーリンク
概要
- 論文の詳細を見る
The purpose of this study was to evaluate the surface roughness and resistance to toothbrusb abrasion of three experimental paint-on composite resins developed for the shade modification of crown and bridge resins. The paint-on resins had less filler volume fraction than restorative composites or the crown and bridge resins and consequently were of low viscosity. The maximum surface roughness (R_max) and the maximum depth loss by abrasion for the paint-on resins following 40,000 cycles of brushing ranged from 2.45 to 4.07 μm and 8.63 to 13.67 μm, respectively. R_max values were 37.7-67.5% lower than that for the crown and bridge resin subjected to the same test. Wear depth was 19.9-49.4% lower than for the crown and bridge resin. These results suggest that the paint-on resins are expected to have adequate resistance to toothbrush abrasion and may therefore be suitable for clinical use.
- 日本歯科理工学会の論文
著者
-
Mccabe John
Dental Materials Science Unit School Of Dental Sciences University Of Newcastle Upon Tyne
-
Mccabe J
Dental Materials Science Unit Department Of Restorative Dentistry The Dental School University Of Ne
-
Fujii Koichi
Department Of Biomaterials Science Graduate School Of Medical And Dental Sciences Kagoshima Universi
-
Ban Seiji
Department Of Biomaterials Science Field Of Oral And Maxillofacial Rehabilitation Course For Advance
-
Fujii Koichi
Department Of Biomaterials Science Field Of Oral And Maxillofacial Rehabilitation Course For Advance
関連論文
- Light transmittance characteristics and refractive indices of light-activated pit and fissure sealants
- Effect of various visible light photoinitiators on the polymerization and color of light-activated resins
- Mechanical properties and cytotoxicity of experimental soft lining materials based on urethane acrylate oligomers
- Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers
- Effect of Inhomogeneity of Light from Light Curing Units on the Surface Hardness of Composite Resin
- Effect of Filler Properties in Composite Resins on Light Transmittance Characteristics and Color
- Mechanical Properties of Woven Glass Fiber-Reinforced Composites
- Mechanical Properties and Bond Strength of Silicone-based Resilient Denture Liners
- Effect of Radiation Light Characteristics on Surface Hardness of Paint-on Resin for Shade Modification
- Deformation and Flexural Properties of Denture Base Polymer Reinforced with Glass Fiber Sheet
- Mechanical Properties of An Experimental Soft Lining Material Based on Urethane Oligomer
- Adhesive Strength of Paint-on Resins to Crown and Bridge Composites
- Light-attenuating Effect of Dentin on the Polymerization of Light-activated Restorative Resins
- Setting Characteristics of Silicone-based Resilient Denture Liners
- Light-curing Reinforcement for Denture Base Resin Using a Glass Fiber Cloth Pre-impregnated with Various Urethane Oligomers
- Bonding Strength and Durability of Alkaline-Treated Titanium to Veneering Resin
- Optical and Color Stabilities of Paint-on Resins for Shade Modification of Restorative Resins
- Toothbrush Abrasion of Paint-on Resins for Shade Modification and Crown Resins : Effect of Water Absorption
- Color Change in Acrylic Denture Base Resin Reinforced with Wire Mesh and Glass Cloth
- Novel Water-blasting Machine for Removal of Refractory Investment and Metal Oxides
- Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
- Neutralizing effect by resin-based materials containing silane-coated glass fillers
- A Case of Enlarged Cavernous Sinus Mistaken for Petrous Apex Tumor
- Biocompatibility of Composite Membrane Consisting of Oriented Needle-like Apatite and Biodegradable Copolymer with Soft and Hard Tissues in Rats
- EFFECT OF SUBSTRATE METALS ON HYDROTHERMAL- ELECTROCHEMICAL DEPOSITION OF APATITE
- Interfacial Oxidations of Pure Titanium and Titanium Alloys with Investments
- A Method for Evaluating Color Stability of Light-cured Composite Resing Using an Experimental Filter
- Inhibitory Effect of Simultaneous Intraportal Administration of 5-Fluorouracil, Uracil and Degradable Starch Microspheres on Experimental Hepatic Micrometastas, is of Colon Cancer
- Optical Properties of Paint-on Resins for Shade Modification of Crown and Bridge Resins : Light Transmittance Characteristics
- Mechanical Properties of Light-cured Composite Resins Cured through Filters that Simulate Enamel
- Biocompatibility of Apatite-coated Titanium Mesh Prepared by Hydrothermal-electrochemical Method
- CHARACTERIZATION OF APATITE IN THE TRANSLUCENT DENTIN OF SINGLE ROOT
- Bactericidal efficacy of glycine-type amphoteric surfactant as a denture cleaner and its influence on properties of denture base resins
- Surface damages of zirconia by Nd:YAG dental laser irradiation
- Radio-opacity of core materials for all-ceramic restorations
- Effect of pH Buffer on Electrochemical Deposition of Calcium Phosphate
- Lattice Parameter Changes of Leucite by Incorporation of Various Cations Substituted for Potassium
- Hydrothermal-Electrochemical Deposition of Calcium Phosphates on Various Metals
- Effect of Cooling Condition on Leucite Crystals in Dental Porcelains
- Microstructure and Homogeneity of Dental Porcelain Frits
- Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia
- Surface Properties and Biocompatibility of Acid-etched Titanium
- Relation between biaxial flexure strength and phase transformation of zirconia with surface treatments( Ceramics for Biomedical Applications in Asian Countries)
- Hydroxyapatite coating on zirconia using glass coating technique( Ceramics for Biomedical Applications in Asian Countries)
- Bioactive Apatite Coating on Titanium Using an Alternate Soaking Process
- Acid Etching of Titanium for Bonding with Veneering Composite Resins
- Homogeneous Langmuir-Blodgett Film of Double-Chain Ammonium Amphiphile Complexed with Anionic Polymer : Chemistry (incl. physical process)
- Determination of Bactericidal Activity of Antibacterial Monomer MDPB by a Viability Staining Method
- Calcium-Ion Incorporation into Titanium Surfaces Accompanied by Electrochemical Apatite-Deposition
- A method for improving the light intensity distribution in dental light-curing units
- Effects of Thermal Cycling on Dynamic Viscoelastic Properties of Four Commercial Resins for Crown and Bridge
- Effect of preparation route on the degradation behavior and ion releasability of siloxane-poly(lactic acid)-vaterite hybrid nonwoven fabrics for guided bone regeneration
- Mechanical Properties of Dental Zirconia Ceramics Changed with Sandblasting and Heat Treatment
- Impact Strength of Acrylic Denture Base Resin Reinforced with Woven Glass Fiber
- Mechanical Properties of Reinforced Denture Base Resin : The Effect of Position and the Number of Woven Glass Fibers
- Relaxation Modulus of Denture Base Resin Reinforced with Woven Glass Fibers
- Adding Silanes to MMA : The Effects on the Water Absortion, Adhesive Strength and Mechanical Properties of Acrylic Denture Base Resins
- MICROSTRUCTURAL CHANGE OF HUMAN DENTIN BY A CO_2 LASER IRRADIATION
- Modification of Electrochemically Deposited Apatite Using Supercritical Water
- Dissolution of Hydroxyapatite-Glass-Titanium Composite and HAP-Precipitation on Surface in vitro
- Dynamic Viscoelastic Properties in Torsion of Four Commercially Available Resins for Crown and Bridge
- Reliability and properties of core materials for all-ceramic dental restorations
- Tooth Brush Abrasion of Paint-on Resins for Shade Modification of Crown and Bridge Resins
- Real-time Monitoring of Apatite Deposition Using Electrochemical Quartz Crystal Microbalance
- pH Distribution Around the Electrode During Electrochemical Deposition Process for Producing Bioactive Apatite
- Cellular compatibility of a gamma-irradiated modified siloxane-poly(lactic acid)-calcium carbonate hybrid membrane for guided bone regeneration
- Effect of Etching Condition on the Formation of Bioactive Surface of Hydroxyapatite-Glass-Titanium Composite
- Deposition of Calcium Phosphate on Titanium by Electrochemical Process in Simulated Body Fluid
- Novel Water-blasting Machine for Removal of Refractory Investment and Metal Oxides
- S-3 Deposition of Calcium Phosphates Using Electrochemical Method
- Properties of indirect composites reinforced with monomer-impregnated glass fiber
- Contamination of dental zirconia before final firing: Effects on mechanical properties