Calcium-Ion Incorporation into Titanium Surfaces Accompanied by Electrochemical Apatite-Deposition
スポンサーリンク
概要
- 論文の詳細を見る
The depths of calcium-ion incorporation into a commercially pure titanium and an experimental β-type titanium alloy were determined using Auger electron spectroscopy. After the electrochemical deposition of apatite, new compositional gradients appeared in the profiles in which the Ca and P concentrations gradually decreased as a function of the depth up to 6-8 nm. The relative concentration of Ca in the outermost layer was higher than that of P. On the other hand, after the soaking in a simulated body fluid, the relative concentration of P was higher than that of Ca in the outermost layer. These results suggested that Ca ions were well incorporated into the outermost oxide layer of titanium accompanied by the electrochemical apatite-deposition on its surface.
- 日本歯科理工学会の論文
著者
-
BAN Seiji
Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima Univer
-
KAMIYA AKIRA
Institute of Medical Electronics Faculty of Medicine, University of Tokyo
-
Sonoda Tsutomu
Institute For Structural And Engineering Materials National Institute Of Advanced Industrial Science
-
Ban Seiji
Department Of Biomaterials Science Kagoshima University Dental School
-
Ban Seiji
Department Of Biomaterials Science Field Of Oral And Maxillofacial Rehabilitation Course For Advance
-
Kamiya Akira
Institute For Structural And Engineering Materials National Institute Of Advanced Industrial Science
-
KAMIYA Akira
Institute for Medical and Dental Engineering, Tokyo Medical and Dental University
関連論文
- Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
- Light transmittance characteristics and refractive indices of light-activated pit and fissure sealants
- Effect of various visible light photoinitiators on the polymerization and color of light-activated resins
- Mechanical properties and cytotoxicity of experimental soft lining materials based on urethane acrylate oligomers
- Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers
- Effect of Inhomogeneity of Light from Light Curing Units on the Surface Hardness of Composite Resin
- Effect of Filler Properties in Composite Resins on Light Transmittance Characteristics and Color
- Mechanical Properties of Woven Glass Fiber-Reinforced Composites
- Mechanical Properties and Bond Strength of Silicone-based Resilient Denture Liners
- Effect of Radiation Light Characteristics on Surface Hardness of Paint-on Resin for Shade Modification
- Deformation and Flexural Properties of Denture Base Polymer Reinforced with Glass Fiber Sheet
- Mechanical Properties of An Experimental Soft Lining Material Based on Urethane Oligomer
- Adhesive Strength of Paint-on Resins to Crown and Bridge Composites
- Light-attenuating Effect of Dentin on the Polymerization of Light-activated Restorative Resins
- Setting Characteristics of Silicone-based Resilient Denture Liners
- Light-curing Reinforcement for Denture Base Resin Using a Glass Fiber Cloth Pre-impregnated with Various Urethane Oligomers
- Bonding Strength and Durability of Alkaline-Treated Titanium to Veneering Resin
- Optical and Color Stabilities of Paint-on Resins for Shade Modification of Restorative Resins
- Toothbrush Abrasion of Paint-on Resins for Shade Modification and Crown Resins : Effect of Water Absorption
- Color Change in Acrylic Denture Base Resin Reinforced with Wire Mesh and Glass Cloth
- Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
- PRESSURE-VOLUME RELATIONSHIPS OF FINGER ARTERIES IN HEALTHY SUBJECTS AND PATIENTS WITH CORONARY ATHEROSCLEROSIS MEASURED NON-INVASIVELY BY PHOTOELECTRIC PLETHYSMOGRAPHY
- Biocompatibility of Composite Membrane Consisting of Oriented Needle-like Apatite and Biodegradable Copolymer with Soft and Hard Tissues in Rats
- EFFECT OF SUBSTRATE METALS ON HYDROTHERMAL- ELECTROCHEMICAL DEPOSITION OF APATITE
- Interfacial Oxidations of Pure Titanium and Titanium Alloys with Investments
- Effects of the Density on Compressive Properties in Cellular Aluminum Produced by the Sintering Method
- Optical Properties of Paint-on Resins for Shade Modification of Crown and Bridge Resins : Light Transmittance Characteristics
- TRANSVENTRICULAR COMPLETE CARDIAC BYPASS SYSTEM : Proceedings of the 34th Annual Meeting of the Japanese Circulation Society (Part I)
- Biocompatibility of Apatite-coated Titanium Mesh Prepared by Hydrothermal-electrochemical Method
- Microstructure and Mechanical Properties of a Rolled Ti-Si-B Alloy
- Effects of Magnesia Particle Addition on Mechanical and Bioactive Properties of Magnesia/Titanium Composite
- CHARACTERIZATION OF APATITE IN THE TRANSLUCENT DENTIN OF SINGLE ROOT
- Bactericidal efficacy of glycine-type amphoteric surfactant as a denture cleaner and its influence on properties of denture base resins
- Formation of ZrC in ZrO_2-C Materials and Its Effect on Molten Steel Penetration
- Surface damages of zirconia by Nd:YAG dental laser irradiation
- Radio-opacity of core materials for all-ceramic restorations
- FLOW LOADING ALTERS THE ADHESION OF CULTURED MOUSE ENDOTHELIAL CELLS TO LYMPHOCYTES BY MODULATING ADHESION MOLECULE EXPRESSION
- Effect of pH Buffer on Electrochemical Deposition of Calcium Phosphate
- Lattice Parameter Changes of Leucite by Incorporation of Various Cations Substituted for Potassium
- Hydrothermal-Electrochemical Deposition of Calcium Phosphates on Various Metals
- Effect of Cooling Condition on Leucite Crystals in Dental Porcelains
- Microstructure and Homogeneity of Dental Porcelain Frits
- Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia
- Surface Properties and Biocompatibility of Acid-etched Titanium
- Relation between biaxial flexure strength and phase transformation of zirconia with surface treatments( Ceramics for Biomedical Applications in Asian Countries)
- Hydroxyapatite coating on zirconia using glass coating technique( Ceramics for Biomedical Applications in Asian Countries)
- Bioactive Apatite Coating on Titanium Using an Alternate Soaking Process
- Acid Etching of Titanium for Bonding with Veneering Composite Resins
- Calcium-Ion Incorporation into Titanium Surfaces Accompanied by Electrochemical Apatite-Deposition
- A method for improving the light intensity distribution in dental light-curing units
- Effect of preparation route on the degradation behavior and ion releasability of siloxane-poly(lactic acid)-vaterite hybrid nonwoven fabrics for guided bone regeneration
- Mechanical Properties of Dental Zirconia Ceramics Changed with Sandblasting and Heat Treatment
- Impact Strength of Acrylic Denture Base Resin Reinforced with Woven Glass Fiber
- Mechanical Properties of Reinforced Denture Base Resin : The Effect of Position and the Number of Woven Glass Fibers
- MICROSTRUCTURAL CHANGE OF HUMAN DENTIN BY A CO_2 LASER IRRADIATION
- Modification of Electrochemically Deposited Apatite Using Supercritical Water
- Dissolution of Hydroxyapatite-Glass-Titanium Composite and HAP-Precipitation on Surface in vitro
- Effects of Left Atrial Pressure and Myocardial Contractility on Left Ventricular Volumes
- The Effect of Ventricular Pacing Rates on the Left Ventricular Volumes
- Reliability and properties of core materials for all-ceramic dental restorations
- Tooth Brush Abrasion of Paint-on Resins for Shade Modification of Crown and Bridge Resins
- Real-time Monitoring of Apatite Deposition Using Electrochemical Quartz Crystal Microbalance
- Complete Intraventricular Cardiac Bypass
- pH Distribution Around the Electrode During Electrochemical Deposition Process for Producing Bioactive Apatite
- Cellular compatibility of a gamma-irradiated modified siloxane-poly(lactic acid)-calcium carbonate hybrid membrane for guided bone regeneration
- Effect of Etching Condition on the Formation of Bioactive Surface of Hydroxyapatite-Glass-Titanium Composite
- Deposition of Calcium Phosphate on Titanium by Electrochemical Process in Simulated Body Fluid
- S-3 Deposition of Calcium Phosphates Using Electrochemical Method
- Contamination of dental zirconia before final firing: Effects on mechanical properties
- Flow-dependent Regulation of Gene Expression in Vascular Endothelial Cells.