Hydroxyapatite coating on zirconia using glass coating technique(<Feature> Ceramics for Biomedical Applications in Asian Countries)
スポンサーリンク
概要
- 論文の詳細を見る
The aim of this study was to develop a novel hydroxyapatite (HA) coating method on zirconia using glass coating technique. A borosilicate glass, the mixture of the glass and HA (30, 50, 70, and 90 mass%), and the 100% HA were coated on two kinds of zirconia discs and fired at 900-950℃. After the final coating, the surface of the sample was etched for 3min in an acid-mixture of 3% HF and 5% HNO_3 to remove the surface layer covered with glass and to obtain the biocompatible surface layer with HA. The shear bonding strength of the glass to zirconia fired at 950 and 1050℃ were determined. There were no significant difference in the bonding strengths between the kind of zirconia (p>0.05). Whereas, the bonding strengths fired at 1050℃ were significantly higher than those at 950℃ (p<0.05). These results suggest that the HA containing glass-coated zirconia, namely functionally gradient structure, could be systematically produced using the glass coating technique and the acid etching.
- 社団法人日本セラミックス協会の論文
- 2008-01-01
著者
-
BAN Seiji
Department of Biomaterials Science, Graduate School of Medical and Dental Sciences, Kagoshima Univer
-
SATO Hideo
Department of Surgery, Ishikawa prefectural Central Hospital
-
Ban Seiji
Kagoshima Univ. Kagoshima Jpn
-
Ban S
Department Of Biomaterials Science Graduate School Of Medical And Dental Sciences Kagoshima Universi
-
YAMASHITA Daisuke
Department of Materials Science and Engineering, Graduate School of Engineering, Nagoya University
-
Ban Seiji
Department Of Biomaterials Science Kagoshima University Graduate School Of Medical And Dental Scienc
-
MIYAMOTO Motoharu
Department of Dental Radiology, Graduate School of Medical and Dental Sciences, Kagoshima University
-
Miyamoto Motoharu
Department Of Dental Radiology Graduate School Of Medical And Dental Sciences Kagoshima University
-
Yamashita Daisuke
Department Of Periodontology Graduate School Of Medical And Dental Sciences Kagoshima University
-
Ban Seiji
Department Of Biomaterials Science Field Of Oral And Maxillofacial Rehabilitation Course For Advance
-
Sato Hideo
Department Of Pediatric Dentistry Graduate School Of Medical And Dental Sciences Kagoshima Universit
-
Sato Hideo
Department Of Biomaterials Science Graduate School Of Medical And Dental Sciences Kagoshima Universi
-
Yamashita Daisuke
Department Of Materials Science And Engineering Graduate School Of Engineering Nagoya University
-
Sato Hideo
Department Of Anesthesiology Aichi Children's Health And Medical Center
-
YAMASHITA Daisuke
Department of Food Science and Technology, Faculty of Agriculture, Kyoto University
-
Yamashita Daisuke
Department of Electronics, Graduate School of Information Science and Electrical Engineering, Kyushu University, Fukuoka 819-0395, Japan
関連論文
- Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
- Light transmittance characteristics and refractive indices of light-activated pit and fissure sealants
- Effect of various visible light photoinitiators on the polymerization and color of light-activated resins
- Mechanical properties and cytotoxicity of experimental soft lining materials based on urethane acrylate oligomers
- Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers
- Effect of Inhomogeneity of Light from Light Curing Units on the Surface Hardness of Composite Resin
- Effect of Filler Properties in Composite Resins on Light Transmittance Characteristics and Color
- Mechanical Properties of Woven Glass Fiber-Reinforced Composites
- Mechanical Properties and Bond Strength of Silicone-based Resilient Denture Liners
- Effect of Radiation Light Characteristics on Surface Hardness of Paint-on Resin for Shade Modification
- Deformation and Flexural Properties of Denture Base Polymer Reinforced with Glass Fiber Sheet
- Mechanical Properties of An Experimental Soft Lining Material Based on Urethane Oligomer
- Adhesive Strength of Paint-on Resins to Crown and Bridge Composites
- Light-attenuating Effect of Dentin on the Polymerization of Light-activated Restorative Resins
- Setting Characteristics of Silicone-based Resilient Denture Liners
- Light-curing Reinforcement for Denture Base Resin Using a Glass Fiber Cloth Pre-impregnated with Various Urethane Oligomers
- Bonding Strength and Durability of Alkaline-Treated Titanium to Veneering Resin
- Optical and Color Stabilities of Paint-on Resins for Shade Modification of Restorative Resins
- Toothbrush Abrasion of Paint-on Resins for Shade Modification and Crown Resins : Effect of Water Absorption
- Color Change in Acrylic Denture Base Resin Reinforced with Wire Mesh and Glass Cloth
- Flexural properties of ethyl or methyl methacrylate-UDMA blend polymers
- Pneumothorax caused by metastatic carcinoma of the breast
- Small Intestinal Metastasis from Esophageal Carcinoma Associated with Small Intestinal Obstruction : Report of a Case
- Alloying Effects on the Phase Stability of Hydrides Formed in Vanadium Alloys
- Development of Biodegradable Composite Membrane Containing Oriented Needle-Like Apatites
- Biocompatibility of Composite Membrane Consisting of Oriented Needle-like Apatite and Biodegradable Copolymer with Soft and Hard Tissues in Rats
- EFFECT OF SUBSTRATE METALS ON HYDROTHERMAL- ELECTROCHEMICAL DEPOSITION OF APATITE
- Interfacial Oxidations of Pure Titanium and Titanium Alloys with Investments
- Isoproterenol-Induced Hypertrophied Rat Hearts : Does Short-Term Treatment Correspond to Long-Term Treatment?
- Increased O_2 consumption in excitation-contraction coupling in hypertrophied rat heart slices related to increased Na^+-Ca^ exchange activity
- Optical Properties of Paint-on Resins for Shade Modification of Crown and Bridge Resins : Light Transmittance Characteristics
- Biocompatibility of Apatite-coated Titanium Mesh Prepared by Hydrothermal-electrochemical Method
- A Surgical Intervention Using Percutaneous Cardiopulmonary Support for Contralateral Pneumothorax following Pneumonectomy
- Intrapulmonary Lymph Nodes Detected by Exploratory Video-assisted Thoracoscopic Surgery : Appearance of Helical Computed Tomography
- Pseudotumor due to Pulmonary Infarction Diagnosed by Video-assisted Thoracoscopic Surgery
- CHARACTERIZATION OF APATITE IN THE TRANSLUCENT DENTIN OF SINGLE ROOT
- Spontaneous Tracheal Rupture Associated with Acquired Tracheobronchomalacia
- Experimental Study on the Propagation of Electromagnetic Waves and the Spatial Distribution of Electric Potential : General Physics
- Bactericidal efficacy of glycine-type amphoteric surfactant as a denture cleaner and its influence on properties of denture base resins
- Surface damages of zirconia by Nd:YAG dental laser irradiation
- Radio-opacity of core materials for all-ceramic restorations
- Effect of pH Buffer on Electrochemical Deposition of Calcium Phosphate
- Metastasis of Thyroid Cancer to Primary Lung Cancer
- Lattice Parameter Changes of Leucite by Incorporation of Various Cations Substituted for Potassium
- Hydrothermal-Electrochemical Deposition of Calcium Phosphates on Various Metals
- Effect of Cooling Condition on Leucite Crystals in Dental Porcelains
- Microstructure and Homogeneity of Dental Porcelain Frits
- Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia
- Surface Properties and Biocompatibility of Acid-etched Titanium
- Relation between biaxial flexure strength and phase transformation of zirconia with surface treatments( Ceramics for Biomedical Applications in Asian Countries)
- Hydroxyapatite coating on zirconia using glass coating technique( Ceramics for Biomedical Applications in Asian Countries)
- Bioactive Apatite Coating on Titanium Using an Alternate Soaking Process
- Acid Etching of Titanium for Bonding with Veneering Composite Resins
- CALCIUM PHOSPHATE DEPOSIT ON PEARL IN VITRO
- Calcium-Ion Incorporation into Titanium Surfaces Accompanied by Electrochemical Apatite-Deposition
- A method for improving the light intensity distribution in dental light-curing units
- Effect of preparation route on the degradation behavior and ion releasability of siloxane-poly(lactic acid)-vaterite hybrid nonwoven fabrics for guided bone regeneration
- Retarded Oxidation of Liquid Lipids Entrapped in Matrixes of Saccharides or Proteins
- Mechanical Properties of Dental Zirconia Ceramics Changed with Sandblasting and Heat Treatment
- Congenital Sternal Cleft with Patent Ductus Arteriosus : Report of a Case
- Pulmonary Blastoma in a Child : Report of a Case
- B-36. Application of Neuroleptanalgesia to the Neurosurgical Field
- Impact Strength of Acrylic Denture Base Resin Reinforced with Woven Glass Fiber
- Mechanical Properties of Reinforced Denture Base Resin : The Effect of Position and the Number of Woven Glass Fibers
- MICROSTRUCTURAL CHANGE OF HUMAN DENTIN BY A CO_2 LASER IRRADIATION
- Modification of Electrochemically Deposited Apatite Using Supercritical Water
- Dissolution of Hydroxyapatite-Glass-Titanium Composite and HAP-Precipitation on Surface in vitro
- Reliability and properties of core materials for all-ceramic dental restorations
- Tooth Brush Abrasion of Paint-on Resins for Shade Modification of Crown and Bridge Resins
- Real-time Monitoring of Apatite Deposition Using Electrochemical Quartz Crystal Microbalance
- pH Distribution Around the Electrode During Electrochemical Deposition Process for Producing Bioactive Apatite
- Cellular compatibility of a gamma-irradiated modified siloxane-poly(lactic acid)-calcium carbonate hybrid membrane for guided bone regeneration
- Effect of Etching Condition on the Formation of Bioactive Surface of Hydroxyapatite-Glass-Titanium Composite
- Study on the Reduction of Reflection Losses in CdS/InP Solar Cells
- Deposition of Calcium Phosphate on Titanium by Electrochemical Process in Simulated Body Fluid
- S-3 Deposition of Calcium Phosphates Using Electrochemical Method
- A Japanese case of ichthyosis follicularis with atrichia and photophobia syndrome with an MBTPS2 mutation
- H2/N2 Plasma Etching Rate of Carbon Films Deposited by H-Assisted Plasma Chemical Vapor Deposition
- A patient with possible TRALI who developed pulmonary hypertensive crisis and acute pulmonary edema during cardiac surgery
- Electron Spin Resonance of Ascorbyl (Vitamin C) Radicals in Synthetic CaCO3 by UV Irradiation
- Contamination of dental zirconia before final firing: Effects on mechanical properties