The Bending Strength of Carburized Fine Module Gear Teeth : Carburizing Conditions and Their Effects on the Fatigue Strength

スポンサーリンク

概要

• 論文の詳細を見る

• In this study, carburized gears of m=1.0-1.5 with various effective case depths are put to bending fatigue tests, and the fatigue strength is obtained. The test results verify that the effective case depth recommended in the AGMA standard is appropriate for the enhancement of bending strength. 0n the basis of results, S-N curves are determined and illustrated. The fatigue strength of the gears is about 1100 MPa. The fatigue strength is compared and illustrated with the strength of the gear teeth of m=5, and the effect of the tooth size on the fatigue strength is estimated quantitatively. The estimated size factor of the carburized gears is 1.0-1.3.

• 社団法人日本機械学会の論文
• 1992-03-15

著者

• Inoue K

  Osaka Univ. Osaka Jpn

• KATO Masana

  Department of Machine Intelligence and Systems Engineering, Akita Prefectural University

• Kato Masana

  Faculty of Engineering, Tohoku University

• Inoue Katsumi

  Faculty of Engineering, Tohoku University

• Takatsu Nobuo

  Department of Science and Engineering, Ishinomaki Senshu University

• JEONG Bongsoo

  Faculty of Engineering, Tohoku University

• TAKATSU Nobuo

  Faculty of Engineering, Tohoku University

• Inoue Katsumi

  Faculty Of Engineering Tohoku University

• Inoue K

  Department Of Machine Intelligence And Systems Engineering Tohoku University

• Kato M

  Department Of Machine Intelligence And Systems Engineering Akita Prefectural University

• Kato Masana

  Faculty Of Engineering Tohoku University

• Jeong Bongsoo

  Faculty Of Engineering Tohoku University

• Takatsu Nobuo

  Faculty Of Engineering Tohoku University

• Takatsu Nobuo

  Department Of Science And Engineering Ishinomaki Senshu University

• Kato Masana

  Department Of Machine Intelligence And Systems Engineering Akita Prefectural University

関連論文

• Bending Fatigue Strength of Carburized Gears with an Artificial Notch at the Fillet
• Evaluation of the Strength of Carburized Spur Gear Teeth Based on Fracture Mechanics
• The Bending Strength of Carburized Fine Module Gear Teeth : Carburizing Conditions and Their Effects on the Fatigue Strength
• Bending Strength of Carburized SCM420H Spur Gear Teeth
• The Positioning of Sensors and Actuators in the Vibration Control of Flexible Systems
• A Study of Pin-Wheel Globoidal Worm Gearing
• Evaluation of Limiting Shear Stress of Lubricants by Roller Test
• Release and Recharge of Fluoride by Restorative Materials
• Influence of Filler Content and Gap Dimension on Wear Resistance of Resin Composite Luting Cements around a CAD/CAM Ceramic Inlay Restoration
• Cytotoxicity of a Trial Resin Composite Liner Containing TiK_2F_6 on Rat Dental Pulp Cells
• Inhibition of Carious Lesions in vitro around Gallium Alloy Restorations by Fluoride Releasing Resin-ionomer Cement
• High-Speed Forming of Metal Sheets by Electromagnetic Force
• Effects of Surface Treatment on the Bending Fatigue Strength of Carburized Spur Gears
• Basic Research on the Vibratory Travelling Element : Travelling mode and Velocity
• Metal Forming by Underwater Wire Explosions : 2. Experiments on Bulging of Circular Aluminum Sheets by Copper Wire Explosions
• Pressure Pulses Produced by Underwater Wire Explosions in Electric Discharge Metal Forming
• Metal Forming by Underwater Wire Explosion : 1. An Analysis of Plastic Deformation of Circular Membranes Under Impulsive Loading
• Influence of Bearing Positions on Sound Radiation of Single-Stage Spur Gear System
• The Effect of Shot Peening on the Bending Strength of Carburized Gear Teeth
• Deflection of Gear Tooth Considering the Deformation of Rim
• Analytical Model of Melting Phenomena for Breaking Relay Contacts
• Flow in a Poppet Valve : Computation of Pressure Distribution using a Streamline Coordinate System
• Statistical Analysis of Dynamic Loads on Spur Gear Teeth : Experimental Study
• Statistical Analysis of Dynamic Loads on Spur Gear Teeth : Effect of Shaft Stiffness
• Dynamic Loads on Spur Gear Teeth Caused by Teeth Impact
• Approximate Solution of a Gear System Subjected to Random Excitation
• Jump Phenomena in Gear System to Random Excitation
• Dynamical Distinctive Phenomena in Gear System
• Electric Measurement of Melting Phenomena for Breaking Relay Contacts

もっと見る 閉じる

スポンサーリンク