水平ローフィン付管の縦列における凝縮液の流動特性
スポンサーリンク
概要
- 論文の詳細を見る
Experiments were performed to study the flow characteristics of condensate on a simulated bank of horizontal low finned tubes. Two or three tubes arranged in a vertical column were set in a stationary vapor. The top tube had a longitudinal slit at the upper end through which the test liquid was fed uniformly on the tube surface. Cooling water was passed through the lower tubes. The test fluids used were R-113, methanol and normal propanol. Four major flow modes: droplet, column, column-sheet and sheet, were observed as the liquid flow rate was increased. Experimental data on the number of instantaneous falling sites, the proportion of surface area covered with the falling liquid and the flooding angle below which the inter-fin sp. ace was flooded with condensate were obtained for a range of liquid flow rates. Theoretical considerations were given to the effect of liquid flow rate on the flow mode transition and on the measured quantities.
- 一般社団法人日本機械学会の論文
- 1987-04-25
著者
関連論文
- スチレン・ブタジエンゴム架橋プロセスの予測法(熱工学,内燃機関,動力など)
- ゴム架橋プロセスに関する研究 : 非定常温度場と架橋度の関係(熱工学,内燃機関,動力など)
- フロン系冷媒の流動蒸気の水平円管上の凝縮
- 低圧水蒸気-空気混合気の水平円管上の強制対流凝縮
- 冷媒CFC11のマイクロフィン付き水平管内凝縮 : 圧力降下の実験式の提案
- 過熱蒸気の水平管内凝縮--熱伝達と圧力降下の式の提案
- 610 SBR/NR架橋プロセスの予測法(熱工学II)
- 610 ソリッドゴムの架橋プロセスに関する研究(熱工学I)
- 407 発泡ゴムの架橋プロセスに関する研究(機械材料・材料加工IV)
- (8)マイクロフィン付き水平管内凝縮の修正理論モデル(論文)(日本機械学会賞〔2002年度(平成14年度)審査経過報告〕)