直交平板の伝熱促進と抗力軽減 : ロッドによる流れの制御

概要

論文の詳細を見る
To control the flow around a flat plate, a small rod was set upstream of the plate. The chord length of the plate, D, was 50mm and the diameter of the rod, d, and the distance between the axes of the rod and plate, L, were varied. The Reynolds number ranged from l.3×10^4 to 7.7×10^4. For the case without vortex shedding from the rod, the shear layer from the rod reattaches on the front face of the plate. Consequently, quasi-stationary vortices are formed between the rod and the plate. In this case, at d/D=0.4 and L/D=1.4〜2.0, the maximum reduction of total drag coefficient is 20〜30%, the average heat transfer on each face increases and the overall heat transfer increases by about 40〜50% compared with values obtained without the rod in place.
一般社団法人日本機械学会の論文
1996-05-25