X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : 2nd Report, Torsional Fatigue
スポンサーリンク
概要
- 論文の詳細を見る
Following the previous studies under cyclic bending stresses, the changes in half-value breadth, residual stress, hardness and microstructure have been investigated under completely reversed torsional stress amplitude and under alternating torsional stress with mean stress. It is found that the mean stress has little effect on the aforesaid changes. So it is deduced that, in the case of torsional stresses, the fatigue mechanism is not influenced essentially with mean stress, and consequently mean stress has little effect on fatigue life. It is also found that in torsional fatigue, tensile residual stress appears on the specimen surface at the initial stage of fatigue, and then it decreases with the number of stress cycles. It seems that the tensile residual stress is due to the absorption of excess vacancies, which are produced with stress cycles, by specimen surface.
- 一般社団法人日本機械学会の論文
著者
-
Abe Takeji
Faculty Of Engineering Kyoto University
-
Taira Shuji
Faculty Of Engineering Kyoto University
-
Honda Kazuo
Faculty Of Engineering Kyoto University
-
TAIRA Shuji
Faculty of Engineering, Kyoto University
-
Honda Kazuo
Faculty of Education, Shimane University, Matsue 690-8504, Japan
関連論文
- Upper Bound Solutions for Extrusion with Two-Stage Conical Die and Curved Die
- Design and Evaluation of Monoclonal Antibody-Antitumor Agent Conjugate
- Thermal Fatigue and Cyclic Mechanical Strain Fatigue at Elevated Temperature of 18-8 Cb Stainless Steel and 2.25 Cr-1 Mo Steel
- Three-Dimensional Observation of Roughening of Free Surface during Compressive Plastic Deformation of Polycrystalline Iron
- X-Ray Investigation on the Residual Stress of Metallic Materials : On the Residual Stress in Carbon Steel Caused by Thermal Stress
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 3rd Report, On Propagation Process of Fatigue Crack
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 2nd Report, Observation of Fatigue Crack Initiation Process by X-ray Microbeam Technique
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 1st Report, Optical-Microscopic Observation of Fatigue Crack Initiation Process
- Creep Rupture of Internally Pressurized Cylinders at Elevated Temperatures
- Fatigue Crack Propagation Behavior in Residual Stress Fields of Laminated Inhomogeneous Metals
- X-Ray Investigation on Fatigue of Polycrystalline Metals : On the Relation between Crystal Orientation and Deformation in fcc Crystal
- Surface Fatigue Crack Propagation Behavior in a Residual Stress Field : (Fatigue Crack Growth Law and Evaluation of Fatigue Crack Propagation Rate)
- Synthesis and Dielectric Properties of Mn-Doped BaTi2O5 Ceramics
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 1st Report, bcc Metal
- Microscopic Residual Stress in Metals Deformed Plastically Under Multiaxial Stress
- A Method of Evaluating Crack Opening Stress Distributions and Stress Intensity Factors Based on Opening Displacements Along a Crack
- Relationship between Stress Intensity Factors and Residual Stress Distributions Evaluated from Discontinuous Displacements along Mixed-Mode Crack
- An Energetic Consideration of Fatigue Mechanism of Metal under Mean Stress
- X-ray Investigation on the Fatigue Damage of Metals
- Study on Fatigue Fracture of Laminated Inhomogeneous Metals : In Quenched Clad Plates of Low Carbon Steel and Middle Carbon Steel
- The Relationship Between the Bending Fatigue Strength of Laminated Inhomogeneous Plates and the Fatigue Crack Growth Law
- X-ray Elastic Constant and Stress Measurement in Metals Having a Texture : 1st Report, Elastic Deformation under Uniaxial Stress
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : 2nd Report, Torsional Fatigue
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : (1st Report, Plane Bending Fatigue)
- X-Ray Investigation on the Prediction of Fatigue Life : On the Changes in Half-Value Breadth of Carbon Steel under Varying Stress Amplitudes
- Surface Crack in Hydrostatic Extrusion of Brittle Metal
- Thermal Fatigue under Pulsating Thermal Stress Cycling
- Effect of Stress Reduction of Secondary Creep of Mild Steel
- Back Pressure Extrusion of Brittle Metals and Metallic Powder
- Central Cracking of Extruded Product of Brittle Metal in Hydrostatic Extrusion : 2nd Report, Analysis
- Central Cracking of Extruded Product of Brittle Metal in Hydrostatic Extrusion : 1st Report, Experiment
- Residual Stresses Produced by Plastic Tension in Notched Plate Specimens and Fatigue Strength
- Influence of Rest in Stress Alternation on the Fatigue Properties of a Low Carbon Steel at Elevated Temperatures
- On the Residual Stresses Due to Alternating Stressing of Annealed Steels
- Fatigue and Dynamic Creep Properties of 13 Cr Steel at Elevated Temperature under Combined Stresses of Static Tension and Alternating Bending
- Dynamic Creep and Fatigue of 13 Chromium Steel at Elevated Temperature
- X-Ray Investigation on Fatigue Fracture of Notched Steel Specimen : Observation of Fatigue Phenomena of Annealed Low-Carbon Steel by X-Ray Microbeam Technique
- X-ray Investigation of Stress Measurement : On the Method of Measurement, the Effect of Radiation Area and Resolving Power
- X-ray Elastic Constant and Stress Measurement in Metals Having a Texture : 2nd Report, Plastic Deformation and Residual Stress
- Crystallographic Study of Yield Condition of Polycrystalline Metals : (3rd Report, Relation between Slip in Crystals and Yield Condition)
- Synthesis and Electrical Properties of KF-Doped BaTiO3 Ceramics
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (III) Prediction of the Creep Deformation under Periodic Stresses
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (II) Creep Deformation under Unsymmetrical Periodic Stress Waves
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave
- Relaxation of 2^1/4 Cr-1 Mo Steel
- Elastic Deformation of Polycrystalline Metals : 3rd Report, Influence of Neighbor Grains
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 2nd Report, hcp Metal
- Deformation of Polycrystalline Metal Composed of Anisotropic Crystals Having Various Stress-Strain Curves
- Deformation of Polycrystalline Metal Composed of Anisotropic Crystals Having Linear Stress-Strain Relation
- Elastic Deformation of Polycrystalline Metal :1st Report, Influence of grain shape on distributions of stress and strain in grains
- X-Ray Study of Surface Residual Stress Produced in Fatigue Process of Annealed Metals
- Influence of Frequency of Stress Cycles on Fatigue at Elevated Temperatures
- Investigation on Dynamic Creep and Rupture of a Low Carbon Steel
- Elastic Deformation of Polycrystalline Metal : 2nd Report, Effect of Slenderness of Grains on Deformation Mode