Investigation on Dynamic Creep and Rupture of a Low Carbon Steel
スポンサーリンク
概要
- 論文の詳細を見る
Dynamic creep and rupture tests were carried out with annealed specimens of a 0.15 percent carbon steel under the combined static and alternating stress with stress ratios (alternating stress/mean stress) of more than unity. The test temperature was 450℃. The results of the present study together with those obtained in the previous study for the stress ratios less than unity were analysed in the light of the authors'theory, which aims to relate the strength under dynamic stress to the static creep strength. The conclusion obtained is summarized as follows : 1. The forms of the dynamic creep curves are similar to those of the static creep curves even for the case of the stress ratio of more than unity. 2. The prediction of dynamic creep rupture strength from the static creep rupture data together with the fatigue data under reversed stress is established over the entire range of stress ratios from zero (static stress) to infinity (reversed stress). This is based on the idea that the damages of material under varying stress are composed both of the creep damage previously discussed and the fatigue damage caused by the dislocation oscillation under alternating stress. 3. The equivalent static stress, which was defined previously to predict the dynamic creep strength from the static creep data in the stage of transient creep, is applicable to the case of creep including the steady state component in addition to the transient component and also to the case of rupture. 4. The influence of the dislocation oscillation due to alternating stress on the dynamic creep was also discussed.
- 一般社団法人日本機械学会の論文
著者
-
Taira Shuji
Faculty Of Engineering Kyoto University
-
Koterazawa Ryoichi
Professor Faculty Of Engineering Kyoto University
-
Taira S.
Faculty of Engineering, Kyoto University
関連論文
- Thermal Fatigue and Cyclic Mechanical Strain Fatigue at Elevated Temperature of 18-8 Cb Stainless Steel and 2.25 Cr-1 Mo Steel
- X-Ray Investigation on the Residual Stress of Metallic Materials : On the Residual Stress in Carbon Steel Caused by Thermal Stress
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 3rd Report, On Propagation Process of Fatigue Crack
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 2nd Report, Observation of Fatigue Crack Initiation Process by X-ray Microbeam Technique
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 1st Report, Optical-Microscopic Observation of Fatigue Crack Initiation Process
- Creep Rupture of Internally Pressurized Cylinders at Elevated Temperatures
- X-Ray Investigation on Fatigue of Polycrystalline Metals : On the Relation between Crystal Orientation and Deformation in fcc Crystal
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 1st Report, bcc Metal
- An Energetic Consideration of Fatigue Mechanism of Metal under Mean Stress
- X-ray Investigation on the Fatigue Damage of Metals
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : 2nd Report, Torsional Fatigue
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : (1st Report, Plane Bending Fatigue)
- X-Ray Investigation on the Prediction of Fatigue Life : On the Changes in Half-Value Breadth of Carbon Steel under Varying Stress Amplitudes
- Thermal Fatigue under Pulsating Thermal Stress Cycling
- Effect of Stress Reduction of Secondary Creep of Mild Steel
- Residual Stresses Produced by Plastic Tension in Notched Plate Specimens and Fatigue Strength
- Influence of Rest in Stress Alternation on the Fatigue Properties of a Low Carbon Steel at Elevated Temperatures
- On the Residual Stresses Due to Alternating Stressing of Annealed Steels
- Fatigue and Dynamic Creep Properties of 13 Cr Steel at Elevated Temperature under Combined Stresses of Static Tension and Alternating Bending
- Dynamic Creep and Fatigue of 13 Chromium Steel at Elevated Temperature
- X-Ray Investigation on Fatigue Fracture of Notched Steel Specimen : Observation of Fatigue Phenomena of Annealed Low-Carbon Steel by X-Ray Microbeam Technique
- X-ray Investigation of Stress Measurement : On the Method of Measurement, the Effect of Radiation Area and Resolving Power
- Crystallographic Study of Yield Condition of Polycrystalline Metals : (3rd Report, Relation between Slip in Crystals and Yield Condition)
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (III) Prediction of the Creep Deformation under Periodic Stresses
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (II) Creep Deformation under Unsymmetrical Periodic Stress Waves
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave
- Relaxation of 2^1/4 Cr-1 Mo Steel
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 2nd Report, hcp Metal
- X-Ray Study of Surface Residual Stress Produced in Fatigue Process of Annealed Metals
- Influence of Frequency of Stress Cycles on Fatigue at Elevated Temperatures
- Investigation on Dynamic Creep and Rupture of a Low Carbon Steel