X-Ray Investigation on the Prediction of Fatigue Life : On the Changes in Half-Value Breadth of Carbon Steel under Varying Stress Amplitudes
スポンサーリンク
概要
- 論文の詳細を見る
It has been reported by the authors that the estimation of fatigue life of the materials under constant stress amplitude can be made using the liner relation of b/B-logn/N (where B and b are the initial and the current half-value breadth of diffraction line in fatigue and n/N is the cycle ratio). In the present paper, the following experiments were performed ; the first, the experiments were made on the case of varying stress amplitude of two stress levels above fatigue limit and investigated the change of half-value breadth due to varying stress amplitude. The second, the half-value breadth was measured by using satisfactory method in physical meaning and compared with the conventional method which has been adopted in these series of investigations. Finally, discussed on a change of half-value breadth under varying stress amplitude and postulated a certain method for nondestructive estimation of fatigue life.
- 一般社団法人日本機械学会の論文
著者
-
Taira Shuji
Faculty Of Engineering Kyoto University
-
Honda Kazuo
Faculty Of Engineering Kyoto University
-
Honda Kazuo
Faculty Of Engineering Kyoto University.
-
Taira S.
Faculty of Engineering, Kyoto University
-
Honda Kazuo
Faculty of Education, Shimane University, Matsue 690-8504, Japan
関連論文
- Design and Evaluation of Monoclonal Antibody-Antitumor Agent Conjugate
- Thermal Fatigue and Cyclic Mechanical Strain Fatigue at Elevated Temperature of 18-8 Cb Stainless Steel and 2.25 Cr-1 Mo Steel
- X-Ray Investigation on the Residual Stress of Metallic Materials : On the Residual Stress in Carbon Steel Caused by Thermal Stress
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 3rd Report, On Propagation Process of Fatigue Crack
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 2nd Report, Observation of Fatigue Crack Initiation Process by X-ray Microbeam Technique
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 1st Report, Optical-Microscopic Observation of Fatigue Crack Initiation Process
- Creep Rupture of Internally Pressurized Cylinders at Elevated Temperatures
- Fatigue Crack Propagation Behavior in Residual Stress Fields of Laminated Inhomogeneous Metals
- X-Ray Investigation on Fatigue of Polycrystalline Metals : On the Relation between Crystal Orientation and Deformation in fcc Crystal
- Surface Fatigue Crack Propagation Behavior in a Residual Stress Field : (Fatigue Crack Growth Law and Evaluation of Fatigue Crack Propagation Rate)
- Synthesis and Dielectric Properties of Mn-Doped BaTi2O5 Ceramics
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 1st Report, bcc Metal
- Microscopic Residual Stress in Metals Deformed Plastically Under Multiaxial Stress
- A Method of Evaluating Crack Opening Stress Distributions and Stress Intensity Factors Based on Opening Displacements Along a Crack
- Relationship between Stress Intensity Factors and Residual Stress Distributions Evaluated from Discontinuous Displacements along Mixed-Mode Crack
- An Energetic Consideration of Fatigue Mechanism of Metal under Mean Stress
- X-ray Investigation on the Fatigue Damage of Metals
- Study on Fatigue Fracture of Laminated Inhomogeneous Metals : In Quenched Clad Plates of Low Carbon Steel and Middle Carbon Steel
- The Relationship Between the Bending Fatigue Strength of Laminated Inhomogeneous Plates and the Fatigue Crack Growth Law
- X-ray Elastic Constant and Stress Measurement in Metals Having a Texture : 1st Report, Elastic Deformation under Uniaxial Stress
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : 2nd Report, Torsional Fatigue
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : (1st Report, Plane Bending Fatigue)
- X-Ray Investigation on the Prediction of Fatigue Life : On the Changes in Half-Value Breadth of Carbon Steel under Varying Stress Amplitudes
- Thermal Fatigue under Pulsating Thermal Stress Cycling
- Effect of Stress Reduction of Secondary Creep of Mild Steel
- Residual Stresses Produced by Plastic Tension in Notched Plate Specimens and Fatigue Strength
- Influence of Rest in Stress Alternation on the Fatigue Properties of a Low Carbon Steel at Elevated Temperatures
- On the Residual Stresses Due to Alternating Stressing of Annealed Steels
- Fatigue and Dynamic Creep Properties of 13 Cr Steel at Elevated Temperature under Combined Stresses of Static Tension and Alternating Bending
- Dynamic Creep and Fatigue of 13 Chromium Steel at Elevated Temperature
- X-Ray Investigation on Fatigue Fracture of Notched Steel Specimen : Observation of Fatigue Phenomena of Annealed Low-Carbon Steel by X-Ray Microbeam Technique
- X-ray Investigation of Stress Measurement : On the Method of Measurement, the Effect of Radiation Area and Resolving Power
- X-ray Elastic Constant and Stress Measurement in Metals Having a Texture : 2nd Report, Plastic Deformation and Residual Stress
- Crystallographic Study of Yield Condition of Polycrystalline Metals : (3rd Report, Relation between Slip in Crystals and Yield Condition)
- Synthesis and Electrical Properties of KF-Doped BaTiO3 Ceramics
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (III) Prediction of the Creep Deformation under Periodic Stresses
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (II) Creep Deformation under Unsymmetrical Periodic Stress Waves
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave
- Relaxation of 2^1/4 Cr-1 Mo Steel
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 2nd Report, hcp Metal
- X-Ray Study of Surface Residual Stress Produced in Fatigue Process of Annealed Metals
- Influence of Frequency of Stress Cycles on Fatigue at Elevated Temperatures
- Investigation on Dynamic Creep and Rupture of a Low Carbon Steel