Crystallographic Study of Yield Condition of Polycrystalline Metals : 1st Report, bcc Metal
スポンサーリンク
概要
- 論文の詳細を見る
An analytical study of the yield condition of bcc metal was carried out based on the Sachs model of polycrystalline aggregates. The yield stress ratio τ/σ of torsion to tension was calculated averaging the orientation factors among all grains. The resultant value of τ/σ was 0.57_3 for the uniform distribution of orientations, which is in good agreement with the value 0.577 obtained from von Mises' law and also with the experimental data. It turned out that the preferred orientation <110> or <100> resulting from uniaxial tension or rolling of bcc polycrystalline metals makes the value τ/σ larger than that of the uniform distribution of orientation. Discussions were made on the physical meaning of von Mises' law.
- 一般社団法人日本機械学会の論文
著者
-
Abe Takeji
Faculty Of Engineering Kyoto University
-
Nagao Masato
Hitachi Laboratory Hitachi Ltd.
-
TAIRA Shuji
Faculty of Engineering, Kyoto University.
-
Taira Shuji
Faculty Of Engineering Kyoto University
-
Taira Shuji
Faculty Of Engineering Kyoto University.
関連論文
- Upper Bound Solutions for Extrusion with Two-Stage Conical Die and Curved Die
- Thermal Fatigue and Cyclic Mechanical Strain Fatigue at Elevated Temperature of 18-8 Cb Stainless Steel and 2.25 Cr-1 Mo Steel
- Three-Dimensional Observation of Roughening of Free Surface during Compressive Plastic Deformation of Polycrystalline Iron
- X-Ray Investigation on the Residual Stress of Metallic Materials : On the Residual Stress in Carbon Steel Caused by Thermal Stress
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 3rd Report, On Propagation Process of Fatigue Crack
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 2nd Report, Observation of Fatigue Crack Initiation Process by X-ray Microbeam Technique
- Study on Fatigue Fracture in Quench-Tempered Carbon Steel : 1st Report, Optical-Microscopic Observation of Fatigue Crack Initiation Process
- Creep Rupture of Internally Pressurized Cylinders at Elevated Temperatures
- X-Ray Investigation on Fatigue of Polycrystalline Metals : On the Relation between Crystal Orientation and Deformation in fcc Crystal
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 1st Report, bcc Metal
- An Energetic Consideration of Fatigue Mechanism of Metal under Mean Stress
- X-ray Investigation on the Fatigue Damage of Metals
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : 2nd Report, Torsional Fatigue
- X-Ray Investigation on Fatigue Damage of Metals under Mean Stress : (1st Report, Plane Bending Fatigue)
- X-Ray Investigation on the Prediction of Fatigue Life : On the Changes in Half-Value Breadth of Carbon Steel under Varying Stress Amplitudes
- Surface Crack in Hydrostatic Extrusion of Brittle Metal
- Thermal Fatigue under Pulsating Thermal Stress Cycling
- Effect of Stress Reduction of Secondary Creep of Mild Steel
- Back Pressure Extrusion of Brittle Metals and Metallic Powder
- Central Cracking of Extruded Product of Brittle Metal in Hydrostatic Extrusion : 2nd Report, Analysis
- Central Cracking of Extruded Product of Brittle Metal in Hydrostatic Extrusion : 1st Report, Experiment
- Residual Stresses Produced by Plastic Tension in Notched Plate Specimens and Fatigue Strength
- Influence of Rest in Stress Alternation on the Fatigue Properties of a Low Carbon Steel at Elevated Temperatures
- On the Residual Stresses Due to Alternating Stressing of Annealed Steels
- Fatigue and Dynamic Creep Properties of 13 Cr Steel at Elevated Temperature under Combined Stresses of Static Tension and Alternating Bending
- Dynamic Creep and Fatigue of 13 Chromium Steel at Elevated Temperature
- X-Ray Investigation on Fatigue Fracture of Notched Steel Specimen : Observation of Fatigue Phenomena of Annealed Low-Carbon Steel by X-Ray Microbeam Technique
- X-ray Investigation of Stress Measurement : On the Method of Measurement, the Effect of Radiation Area and Resolving Power
- Size Effect on Fatigue Strength of Machined Carbon Steel : X-Ray Detection of Fatigue Damage in Machine Parts
- Crystallographic Study of Yield Condition of Polycrystalline Metals : (3rd Report, Relation between Slip in Crystals and Yield Condition)
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (III) Prediction of the Creep Deformation under Periodic Stresses
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave : (II) Creep Deformation under Unsymmetrical Periodic Stress Waves
- Creep of Mild Steel under Periodic Stresses of Rectangular Wave
- Relaxation of 2^1/4 Cr-1 Mo Steel
- Elastic Deformation of Polycrystalline Metals : 3rd Report, Influence of Neighbor Grains
- Crack Initiation at Notches in Low Cycle Fatigue
- Crystallographic Study of Yield Condition of Polycrystalline Metals : 2nd Report, hcp Metal
- Deformation of Polycrystalline Metal Composed of Anisotropic Crystals Having Various Stress-Strain Curves
- Deformation of Polycrystalline Metal Composed of Anisotropic Crystals Having Linear Stress-Strain Relation
- Elastic Deformation of Polycrystalline Metal :1st Report, Influence of grain shape on distributions of stress and strain in grains
- X-Ray Study of Surface Residual Stress Produced in Fatigue Process of Annealed Metals
- Influence of Frequency of Stress Cycles on Fatigue at Elevated Temperatures
- Investigation on Dynamic Creep and Rupture of a Low Carbon Steel
- Elastic Deformation of Polycrystalline Metal : 2nd Report, Effect of Slenderness of Grains on Deformation Mode