Fretting Fatigue in SUP9 Spring Steel Under Random Loading
スポンサーリンク
概要
- 論文の詳細を見る
The fretting fatigue strength of SUP 9 spring steel under random loading was examined by clamping the contact pads of the same material. Random loading reduced the fretting fatigue strengths by a factor of 1.5. The linear cumulative damage rule held well for fretting fatigue under random loading. The relationship between the coefficient of the friction and the slip amplitude using root-mean-square values under random loading agreed well with that under constant amplitude loading. Prediction of fatigue life was made on the basis of the fracture mechanics analysis proposed in the previous paper, where the frictional force between the fretting pad and the specimen was taken into consideration. The predicted lives were in good agreement with the experimental results.
- 一般社団法人日本機械学会の論文
- 1989-04-15
著者
-
Mutoh Yoshiharu
Nagaoka University of Technology
-
Mutoh Yoshiharu
Department Of Mechanical Engineering Nagaoka Unversty Of Technology
-
Mutoh Yoshiharu
Nagaoka Univ. Of Tech.
-
Mutoh Yoshiharu
Dept. Of Mechanical Engineering Nagaoka Univ. Of Tech.
-
Tanaka Katsuyuki
Department Of Mechanical System Engineering School Of Engineering University Of Shiga Prefecture
-
Tanaka K
Department Of Mechanical System Engineering School Of Engineering University Of Shiga Prefecture
-
TANAKA Kohichi
Nagaoka University of Technology
-
KONDOH Masami
Mazda Ltd,
-
Kondoh Masami
Mazda Ltd
関連論文
- INITIATION AND GROWTH OF SMALL FATIGUE CRACK IN TiAl INTERMETALLICS AT ELEVATED AND ROOM TEMPERATURES
- Pharmacokinetic Investigation of Increased Efficacy Against Malignant Gliomas of Carboplatin Combined With Hyperbaric Oxygenation
- 229 Effect of Fabricated Surface on Fretting Fatigue Strength
- 113 Fatigue Strength of Fabricated Structure Steel
- Fatigue Behavior of SiC Fiber Reinforced SiC Matrix Composites(Composite 1)
- 17-O-10 Effect of Stress on Second Harmonic Generation of TeO_2-Based Glass Ceramics
- E-7 Effect of surface treatments on fretting fatigue strength of aluminum alloy(Session: Fatique/SCG)
- Preface
- Dexamethasone Increases β_2 : Adrenoceptor : Regulated Phosphatidylcholine Secretion in Rat Alveolar Type II Cells
- Fatigue and acoustic emission behavior of plasma sprayed HAp/Ti bond coat with HAp top coat on commercially pure titanium
- Interface Fatigue Crack Propagation in Ceramic Thermal Barrier Coatings
- Self-sterilizing catheters with titanium dioxide photocatalyst thin films for clean intermittent catheterization : Basis and study of clinical use
- An Evaluation of the Adhesive Strength of the Interface between a Coating and Substrate
- 133 Cohesive Strength at the Interface Between Coating and Substrate
- 129 Effect of Environment on Fretting Fatigue Strength of Cast Al-Si Aluminum Alloy
- Effect of Grain Size on Strength and Fracture Toughness in Alumina
- Differential Light Regulation of the rbcS Gene Expression in Two Cell Lines of the Liverwort Marchantia paleacea var.diptera
- Light-Dependent Expression of Protochlorophyllide Oxidoreductase Gene in the Liverwort, Marchantia paleacea var.diptera
- OS11(1)-2(OS11W0243) Evaluation of Crack Initiation Limit in Fretting Fatigue Based on the Singular Stress Field near the Contact Edge
- Subsurface Crack Propagation in Rolling Contact Fatigue of Sintered Alloy
- 131 Subsurface Crack Propagation in Rolling Contact Fatigue of Sintered Alloy
- 514 Interface Fatigue Crack Propagation in Ceramic Thermal Barrier Coatings
- P-MC-04 New Method for Evaluation of the Ultra-Thin Air Film Spacing between Head Slider and Disk Surface on Magnetic Disk Files : General Description of Problem and Solving Method
- P-HDI-02 EXAMINATION OF FLYING HEIGHT OF MAGNETIC HEAD SLIDER IN SIMULATIONS AND MEASUREMENTS AT NANOMETER-ORDER SPACING
- Fretting Fatigue in SUP9 Spring Steel Under Random Loading
- Dynamic Characteristics of Air-lubricated Slider Bearings for Magnetic Disk Files : Calculation by Finite Element Method : Vibration, Control Engineering, Engineering for Industry
- Fretting Fatigue in JIS S45C Steel Under Two-Step Block Loading : Solid-Mechanics, Strength of Materials
- Characterization of a cDNA Encoding CuZn-Superoxide Dismutase from the Liverwort Marchantia paleacea var.diptera
- Purification of the Cytosolic CuZn-Superoxide Dismutase (CuZn-SOD) of Marchantia paleacea var. diptera and its Resemblance to CuZn-SOD from Chloroplasts
- Construction of physical map and mapping of chromosomal virulence genes of the biovar 3 Agrobacterium (Rhizobium vitis) strain K-Ag-1
- 448 An Alternative BEM for 3D Finite Cracked Bodies
- Strength of Dissimilar Materials Joint between A5052 and PET Joined by Using Friction Stir Heating
- Study on a Controlling Method for Crack Nucleation and Propagation Behavior in Laser Cutting of Glass
- 620 Acoustic Emission Behavior on Fatigue Crack Characterization of Plasma Sprayed Hydroxyapatite Coated Layers OTeerawat Laonap akul 3 (NUT), Yuichi Otsuka,「Yoshiharu Mutoh(GS21-1-3材料力学/材料加工,疲労特性(3))