Effect of Grain Size on Strength and Fracture Toughness in Alumina
スポンサーリンク
概要
- 論文の詳細を見る
Three-point bending and fracture toughness tests of alumina specimens with various grain sizes were carried out to investigate the effects of grain size on bending strength and fracture toughness. The bending strength increased with decreasing grain size. The intrinsic fracture toughness, which can be obtained by the CSF method, is independent of grain size. On the other hand, the apparent fracture toughness with slow crack growth increased with increasing grain size due to the R-curve behavior, which was found for materials with coarse grains in the BI, FP and CN specimens.
- 一般社団法人日本機械学会の論文
- 1994-07-15
著者
-
Mutoh Yoshiharu
Nagaoka University of Technology
-
UEMATSU Keizo
Nagaoka University of Technology
-
UEMATSU Keizo
Department of Chemistry, Nagaoka University of Technology
-
Mutoh Yoshiharu
Nagaoka Univ. Of Tech.
-
Uematsu K
Dep. Of Materials Sci. And Technol. Nagaoka Univ. Of Technol.
-
Miyahara Nobuyuki
Graduate School, Nagaoka University of Technology
-
Yamaishi Kohei
Isuzu Ceramics Research Inst. Co.
-
Inoue Makoto
Nagaoka University of Technology
-
Miyahara Nobuyuki
Graduate School Nagaoka University Of Technology
関連論文
- INITIATION AND GROWTH OF SMALL FATIGUE CRACK IN TiAl INTERMETALLICS AT ELEVATED AND ROOM TEMPERATURES
- Crystal-Oriented Bi_4Ti_3O_ Ceramics Fabricated by High-Magnetic-Field Method
- Crystal Growth of Highly Oriented Zinc Oxide by Laser Deposition Technique with Metal-EDTA (ethylene diamine tetra-acetic acid) Complexes
- USEFULNESS OF THALLIUM-201 MYOCARDIAL PERFUSION IMAGES FOR JUDGING THE EFFECT OF REDUCING INFARCT SIZE BY PTCR : COMPARING WITH LEFT VENTRICULOGRAPHY IN CHRONIC PHASE : Ischemic Heart Disease (II), Coronary Circulation : II : 48 Annual Scientific Meeting,
- 229 Effect of Fabricated Surface on Fretting Fatigue Strength
- 113 Fatigue Strength of Fabricated Structure Steel
- Fatigue Behavior of SiC Fiber Reinforced SiC Matrix Composites(Composite 1)
- 17-O-10 Effect of Stress on Second Harmonic Generation of TeO_2-Based Glass Ceramics
- 02-O-10 Evaluation of Compaction Behavior by Observation of Internal Structure in Granules Compact
- E-7 Effect of surface treatments on fretting fatigue strength of aluminum alloy(Session: Fatique/SCG)
- Preface
- Fatigue and acoustic emission behavior of plasma sprayed HAp/Ti bond coat with HAp top coat on commercially pure titanium
- Estimation of Weibull modulus from coarser defect distribution in dry-pressed alumina ceramics
- Structure of strength-limiting flaws in alumina ceramics made by the powder granule compaction process
- Characterization of Large Defects in Alumina Green Compacts with Liquid Immersion-Polarized Light Microscopy(Physics, Processes, Instruments & Measurements)
- Preparation and Thermoelectric Property of Highly Oriented Al-Doped ZnO Ceramics by a High Magnetic Field
- Fabrication of c-axis Oriented Zn_Al_O by a High-Magnetic-Field via Gelcasting and its Thermoelectric Properties(Properties(structural and functional)Guest Editors Dedicated to Prof. Gunter Petzow: Modern Trends in Advanced Cera
- 129 Effect of Environment on Fretting Fatigue Strength of Cast Al-Si Aluminum Alloy
- Characterization of the Property Change of Mg-C Refractories Used in Steelmaking by Image Analysis
- Relevance of internal structures to the fracture strength of injection-molded and sintered silicon nitride ceramics
- Effect of calcination of the mixture of alumina powder and aqueous magnesium solution on the microstructure and properties of sintered bodies
- Effect of dewaxing procedures of cold isostatically pressed silicon nitride ceramics on its microstructure and fracture strength
- New characterization method for pore and packing structure in powder compacts using confocal laser scanning microscope
- Relevance of the Fracture Strength to Process-Related Defects in Alumina Ceramics
- Effect of Grain Size on Strength and Fracture Toughness in Alumina
- Fretting Fatigue in SUP9 Spring Steel Under Random Loading
- 448 An Alternative BEM for 3D Finite Cracked Bodies
- Crystal-Oriented La-Substituted Sr2NaNb5O15 Ceramics Fabricated Using High-Magnetic-Field Method
- Strength of Dissimilar Materials Joint between A5052 and PET Joined by Using Friction Stir Heating
- $C$-axis-Oriented (Sr,Ca)2NaNb5O15 Multilayer Piezoelectric Ceramics Fabricated Using High-Magnetic-Field Method
- Crystal-Oriented Bi4Ti3O12 Ceramics Fabricated by High-Magnetic-Field Method
- Study on a Controlling Method for Crack Nucleation and Propagation Behavior in Laser Cutting of Glass
- 620 Acoustic Emission Behavior on Fatigue Crack Characterization of Plasma Sprayed Hydroxyapatite Coated Layers OTeerawat Laonap akul 3 (NUT), Yuichi Otsuka,「Yoshiharu Mutoh(GS21-1-3材料力学/材料加工,疲労特性(3))