229 Effect of Fabricated Surface on Fretting Fatigue Strength
スポンサーリンク
概要
- 論文の詳細を見る
This research work describes the effect of fabricated surface on fretting fatigue strength of hot-rolled steel for automobile structural uses. The dog-bone shape specimens sectioned from the fabricated components after cold spinning process were used in this study. Fretting fatigue tests were carried out at frequency of 15Hz and a stress ratio of 0.1 with contact pressure of 100MPa. The results reveal that the different surface conditions impact the fretting fatigue strength. Influence of small size of fabricated surface defect induced by cold spinning on fretting fatigue strength can be ignored.
- 2007-11-16
著者
-
Yoshii Kenji
Topy Industries, Ltd
-
Mutoh Yoshiharu
Nagaoka University of Technology
-
Yoshii Kenji
Topy Industries Ltd.
-
Yoshii Kenji
Topy Industries Limited
-
Miyashita Yukio
Nagaoka National College Of Technology
-
Mutoh Yoshiharu
Nagaoka Univ. Of Tech.
-
Ounpanich Duangporn
Nagaoka University Of Technology
-
Mutoh Y
Nagaoka Univ. Technol.
関連論文
- E-10 Effect of Fabricating Process on Fatigue Behavior of HSLA Steel(Session: Fatique/SCG)
- INITIATION AND GROWTH OF SMALL FATIGUE CRACK IN TiAl INTERMETALLICS AT ELEVATED AND ROOM TEMPERATURES
- S0301-5-1 Effect of Conversion Coating and Painting on the Corrosion Fatigue Behavior of Extruded Magnesium Alloy AZ61
- 1047 Effect of Chemical Conversion Coating on the Fatigue behavior of Extruded AZ61 Magnesium Alloys
- 435 Fatigue behavior of die-cast AM60 alloy under different environmental conditions
- 229 Effect of Fabricated Surface on Fretting Fatigue Strength
- 2306 Corrosion Fatigue Behavior of Extruded AZ31
- 114 Effect of Corrosive Environment on Fatigue Strength of Magnesium alloy AZ-61
- 113 Fatigue Strength of Fabricated Structure Steel
- Fatigue Behavior of SiC Fiber Reinforced SiC Matrix Composites(Composite 1)
- 17-O-10 Effect of Stress on Second Harmonic Generation of TeO_2-Based Glass Ceramics
- E-7 Effect of surface treatments on fretting fatigue strength of aluminum alloy(Session: Fatique/SCG)
- Preface
- Fatigue and acoustic emission behavior of plasma sprayed HAp/Ti bond coat with HAp top coat on commercially pure titanium
- 129 Effect of Environment on Fretting Fatigue Strength of Cast Al-Si Aluminum Alloy
- Effect of Grain Size on Strength and Fracture Toughness in Alumina
- 533 Effect of Environment on Fatigue Properties of Anodized AM60 Die-Cast Mg Alloys
- Fretting Fatigue in SUP9 Spring Steel Under Random Loading
- 448 An Alternative BEM for 3D Finite Cracked Bodies
- 232 Al_2O_3-based Composite with BaTiO_3 Sintered by Spark Plasma Sintering
- J-1 MECHANICAL PROPERTIES MAPPING AROUND INTERFACE OF BONDED MATERIALS USING NANOINDENTATION(Session: Interface/FEM/CAE)
- Strength of Dissimilar Materials Joint between A5052 and PET Joined by Using Friction Stir Heating
- Study on a Controlling Method for Crack Nucleation and Propagation Behavior in Laser Cutting of Glass
- 620 Acoustic Emission Behavior on Fatigue Crack Characterization of Plasma Sprayed Hydroxyapatite Coated Layers OTeerawat Laonap akul 3 (NUT), Yuichi Otsuka,「Yoshiharu Mutoh(GS21-1-3材料力学/材料加工,疲労特性(3))