温水劣化FRPの固体粒子衝突***ージョン特性(特集高分子系複合材料)

概要

論文の詳細を見る
Experiments were carried out to study the solid particle erosion behavior of FRP degraded by hot water. The FRP used was unsaturated polyester resin reinforced by chopped glass fiber mat. The test specimens were soaked in hot water of 80℃ and the degraded test specimens were used in the erosion tests. The Vickers hardness of a resin part in the FRP was measured and the interlaminar shear strength of the FRP was obtained from short beam three-point bending tests. According to these test data, the resin became ductile and the interface between resin and fibers was weakened due to the degradation by hot water. It is found from the erosion test data that the erosion behavior of the degraded FRP is affected both by increasing ductility of the resin which results in decreasing the erosion rate and by decreasing the interfacial strength between resin and fiber which results in increasing the erosion rate.
社団法人日本材料学会の論文
1997-04-15