水中遅れ破壊における切欠底部の破面様相

概要

論文の詳細を見る
A delayed fracture test has been made on SNCM8 steel tempered at 490℃ (σ_Y=127kg/mm^2) in distilled water at 80℃ using self-stressed WOL specimens. The results obtained are as follows : 1) Crack initiation time is almost identical with the total delayed fracture time in the case of conventional notched specimen. 2) Prevailing dimple pattern is observed in delayed fracture surface under higher applied stress, consisting with the fracture surface in air, while intergranular cracking is observed under lower stress. This trend agrees with the cases of delayed fracture in hydrogen gas and in distilled water with zinc anode. 3) Stretched zone is observed both in the tensile fracture and the delayed fracture. The width of stretched zone is proportional to (K_<IC>/σ_Y)^<1.91> for the tensile fracture, while it is proportional to (K_<IC>/σ_Y)^<1.13> for the delayed fracture if σ_Y does not vary in the case and 127kg/mm^2 is applied. This indicates that the apparent decrease of flow stress σ_Y should take place during the delayed fracture test. But the effect of hydrogen cannot be estimated because this material shows large stress relaxation. 4) On the basis of Hahn and Rosenfield's relationship between K_<IC>, and tensile properties, it is estimated that the apparent considerable decrease of the true fracture strain of material near notch root combined with the apparent decrease of flow stress σ_Y, occurs in the delayed fracture in the water.
社団法人日本鉄鋼協会の論文
1975-09-01

水中遅れ破壊における切欠底部の破面様相

スポンサーリンク

概要

著者

関連論文

スポンサーリンク