焼結鉱の気孔形成に及ぼす鉄鉱石鉱物特性の影響(塊成鉱)(<特集>製銑プロセスの機能強化と新展開)

概要

論文の詳細を見る
The effects of mineralogical properties of iron ores on the pore formation in the sintering process have been examined from view points of partical size, combined water content and structure of iron oxide. Quasi-particles consist of nulear ores coated with limestone (-0.5 mm and the ratio of CaO to ore (CaO/Ore) was 0.1 and 0.2) have been made by granulating with water, and heat treated by the electric furnace that simulated the heating pattern in an actual sintering process. The porosity of sintered specimen was determined by using the image analysis. It was found that the porosity of sinterd specimen was increased with the increase in the combined water contents significantly, whereas was not affected by the particle size in the range of 1.0-4.75 mm. However, Indian high-goethite ore had low porosity of sintered specimen in spite of high combined water contents. It was presumed that the martite was converted into the dense structure and the melts penetrated into the cracks of goethite during heating. It was concluded that, in order to control of the pore formation of sinter, the ratio of CaO/Ore should be determinted by the combined water contents of the iron ores as nuclei of quasi-particles and the sturcture of iron oxides.
2001-05-01