鋼塊内部温度推定とそれに基づく均熱炉最適炉温パターンの検討(温度計測・推定技術)(<特集>鉄鋼製造のための新しい計測技術)

概要

論文の詳細を見る
The investigation is concerned with the optimal operation of soaking pits by means of the systems engineering technique. The mathematical models of heat transfer for ingots and soaking pits are developed. The model for the ingot was evaluated to the data on surface and inner temperatures of ingot, while the model for the soaking pit was tested against the data on fuel flow. The results obtained are satisfactory to estimate the optimal heating pattern of the soaking pits. The optimization equations are formulated and the solution is obtained by using a multiplier method. Numerical results are given and the relation between the track time and the optimal solution is discussed. It is found that there exists an optimal heating time which minimizes the fuel consumption. When the heating time is shorter than the optimal value, the lowest temperature of the ingot becomes the constraint. On the other hand, when the heating time is longer than the optimal value, the mean temperature of the ingot becomes the constraint.
社団法人日本鉄鋼協会の論文
1984-07-01