Melt-liquid joining of heterogeneity metallic glassy alloy and mechanical properties (特集 金属ガラスの最近の研究)
スポンサーリンク
概要
- 論文の詳細を見る
The new metallic bulk glass joining technique which enables the joining of Zr55Cu30Ni5Al10 and Cu42Zr42Ag8Al8 bulk glassy alloys without any crystallization has been developed. The joining technique utilizes the collision-induced diffusion phenomenon between the Zr- and Cu- based molten alloy streams with high velocity generated by ejection of alloy liquid through two nozzles at different directions. The joined region has nearly the same structure, thermal stability and mechanical properties as those for the original glassy alloys. The success of joining the Zr- and Cu-based bulk glassy alloys directly joined from liquid without any intermediate process is desired as a new type of engineering materials.
- 2009-11-15
著者
-
INOUE Akihisa
WPI, Advanced Institute for Materials Research, Tohoku University
-
井上 明久
東北大学 金属材料研究所
-
井上 明久
東北大
-
Wang Xinmin
Institute Of Materials Research Tohoku University
-
Wang Xinmin
Imr Tohoku University
-
Inoue Akihisa
Department Of Materials Science Osaka Prefecture University
-
Inoue Akihisa
Wpi Advanced Institute For Materials Research Tohoku University
-
Inoue A
Tohoku Univ. Sendai
-
Inoue Akihisa
Wpi-advanced Institute For Materials Research Tohoku University
-
Inoue Akihisa
Institute Of Materials Research Tohoku University
-
SON KunSu
IMR, Tohoku University
-
WANG XinMin
IMR, Tohoku University
-
Son Kunsu
Imr Tohoku University
-
Inoue Akihisa
Wpi Tohoku University
関連論文
- 21pHW-4 Ni-Nb-Zr-H系金属ガラス室温電界効果型トランジスタ(21pHW 量子ドット・グラフェン,領域4(半導体,メゾスコピック系・局在))
- 各種ケイ酸ガラスとZr基金属ガラスの陽極接合界面
- 摩擦攪拌接合によるZr基金属ガラス/純Alの異材接合
- ガストンネル型プラズマ溶射によるNi基金属ガラス膜の性質
- ヘテロアモルファス相を利用した1.9テスラの高飽和磁束密度を有する高Fe濃度FeSiBPCuナノ結晶合金の開発
- Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
- 東北大学の原子力研究分野への取組み
- Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
- 27pYB-8 金属ガラスNi-Nb-Zrの低温比熱と水素吸蔵による変化(液体金属,領域6,金属,超低温,超伝導・密度波)
- 27pYB-7 Ni-Nb-Zr-H系金属ガラスのNMR(液体金属,領域6,金属,超低温,超伝導・密度波)
- 26aXG-1 ナノキャパシタンスを持ったNi-Nb-Zr-H系金属ガラスの常温クーロン振動(量子ドット,領域4,半導体,メゾスコピック系・局在)
- Tailoring Thermally Induced Nano-Quasicrystallization and Deformation-Assisted Nanocrystallization for Mechanical Property Improvement in Zr-Al-Ni-Cu-Pd Bulk Metallic Glasses
- Enhancement of Corrosion Resistance of Titanium-Copper Based Metallic Glass by Methylsiloxane Coating
- Interface Structure between Ti-Based Bulk Metallic Glasses and Hydroxyapatite Ceramics Jointed by Hydrothermal Techniques
- Glass-Forming Ability and Properties of New Au-Based Glassy Alloys with Low Au Concentrations
- 30pYK-4 Zr系金属ガラスにおける緩和現象の比熱測定による研究(30pYK 液体金属,領域6(金属,超低温,超伝導・密度波))
- S105 生体用Ti基金属ガラスの熱的安定性、化学的性質および機械的性質(力学適応能,自己組織化能を有するバイオマテリアル-生体インターフェイスの創製,SP1:シンポジウム1)
- 524 金属ガラス生体材料の創製(GS2-1:バイオマテリアル(1))
- キャップ鋳造法による大型バルク金属ガラスの開発 (創刊28周年特集 バルク金属ガラスの展望)
- バルク金属ガラスの鋳造法 (特集 金属ガラス)
- 急冷凝固(Ni_Nb_)_Zr_アモルファス合金の水素透過性に対する表面被覆元素の影響
- 120 Fe基金属ガラスのナノインプリント特性(材料の超精密加工とマイクロ/ナノ加工の動向)
- 2718 Pt基金属ガラスのナノインプリント成形特性(G04-1 機械材料・材料加工(1),G04 機械材料・材料加工)
- 522 圧電素子を用いた小型疲労試験機の開発とNi基金属ガラスの疲労特性(OS 先端材料の力学特性と計測技術(1))
- Mg基急冷凝固合金粉末の作製とその押出し材の性質 (特集 サステナブル社会に向けた 軽合金材料の製造プロセス開発最前線)
- Mechanical Properties of Soft Magnetic (Fe_Si_B_P_)_Cu_x (x = 0 and 0.1) Bulk Glassy Alloys
- High Corrosion Resistant Ni-Based Glassy Alloys in Boiling Nitric Acid Solutions
- W強化Zr基金属ガラスの作製と特性評価
- Zr_Ni_Cu_6Al_8バルク金属ガラスの低温下における引張塑性変形挙動
- 金属ガラス溶射コーティング技術の開発とその応用
- Fe-Al-Ga-P-C-B-Siバルクアモルファス軟磁性合金の作製
- Fe基金属ガラス粉末の固化成形とその磁気特性
- 円環状バルクFe-Al-Ga-P-C-B-Si金属ガラスの磁気特性
- Fe-半金属系金属ガラス厚板材の作製と軟磁気特性
- Fe基金属ガラスにおけるコアロスの周波数依存性
- 高飽和磁束密度を有するFe貴金属ガラスの軟磁気特性
- Production of Ni_Cr_P_B_4 Metallic Glass-Coated Bipolar Plate for Fuel Cell by High Velocity Oxy-Fuel (HVOF) Spray Coating Method
- Zr基バルク金属ガラスのガラス遷移温度以下の温度におけるクリープ変形挙動
- 実は, Zr-Cu-Ni-Alバルク金属ガラスは電子ビーム溶接ができます!
- 高強度・高耐熱強度を示すAl合金粉末冶金材の開発
- パルス通電加熱と粘性変形の組合せによるバルク金属ガラスの接合
- 金属ガラスの最近の研究
- 金属ガラス・ナノ結晶の材料科学工学
- 1327 ナノ結晶Pd系成膜SAWデバイスによる溶存水素センサの研究開発(J14-6 知的材料・構造システム(6) 圧電・磁歪センサ,ジョイントセッション,21世紀地球環境革命の機械工学:人・マイクロナノ・エネルギー・環境)
- 108 超急冷アモルファス・ナノ結晶化Ti過剰TiNiCu形状記憶合金の材料プロセスと機能発現(OS 複合機能化材料・デバイスとその加工プロセス)
- Melt-liquid joining of heterogeneity metallic glassy alloy and mechanical properties (特集 金属ガラスの最近の研究)
- Development of Ni-Pd-P-B Bulk Metallic Glasses with High Glass-Forming Ability
- Effect of Cu and P on the Crystallization Behavior of Fe-Rich Hetero-Amorphous FeSiB Alloy
- Fe-Rich Soft Magnetic FeSiBPCu Hetero-Amorphous Alloys with High Saturation Magnetization
- Displacement Behavior Study of the Shear Stress Effect on the Early Viscous Flow Nature of Fe-B-Nb-Y Metallic Glassy Powder in Spark Plasma Sintering
- Preparation of Bulk Glassy Fe_Si_9B_P_5 as a Soft Magnetic Material by Spark Plasma Sintering
- FeSiBPCu Nanocrystalline Soft Magnetic Alloys with High B_s of 1.9 Tesla Produced by Crystallizing Hetero-Amorphous Phase
- Ni-Rich Bulk Metallic Glasses with High Glass-Forming Ability and Good Metallic Properties
- Glass Formation in a Ni-Based Multicomponent Alloy by Mechanical Milling and Microwave Treatment of The Obtained Powders
- Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
- Formation and Mechanical Properties of New Cu-Rich Cu-Zr-Al-Ag Glassy Alloys with High Glass-Forming Ability
- Spark Plasma Sintering of Mg-Based Amorphous Ball-Milled Powders
- αFe/NdFeB系ナノコンポジット合金の磁気特性と微細構造
- αFe/NdFeB系交換スプリング磁石の磁気特性と微細構造
- αFe/NdFeB系ナノコンポジット合金の磁気特性と微細構造
- 213 Ni基金属ガラス箔のレーザ溶接性に関する検討
- ポーラス金属ガラスの作製と性質 (特集 マクロポーラス金属の開発最前線)
- 最大で2.2GPaの引張強度を持つCu-Zr合金線材の開発とそのミクロ組織
- 残存アモルファス相を含むαFe/NdFeB系ナノコンポジット合金の磁気特性
- 残存アモルファス相を含むαFe/NdFeB系ナノコンポジット合金の磁気特性
- αFe-NdFeB系交換スプリング磁石急冷薄帯の磁気特性
- Effect of Nb on Transformation Kinetics and Mechanical Properties in Zr-Al-Ni-Cu Metallic Glasses
- Synthesis and Mechanical Properties of New Cu-Based Cu-Zr-Al Glassy Alloys with Critical Diameters up to Centimeter Order
- Development of W-Reinforced Zr-Based Metallic Glass
- Microstructure of Bonding Interface for Resistance Welding of Zr-Based Metallic Glass Sheets
- Special Issue on Joining Technology for New Metallic Glasses and Inorganic Materials - Selected Papers from the IUMRS International Conference in Asia 2008 (IUMRS-ICA2008)
- Composition Control of Pd-Cu-Si Metallic Glassy Alloys for Thin Film Hydrogen Sensor
- Influence of Precipitation Behavior of Different Crystalline Phases for Embrittlement Behavior of Several Zr-Based Metallic Glasses
- Cu-4.5at.%Zr合金粉末冶金材の電気的・機械的性質
- 摩擦攪拌プロセスによるFe基金属ガラス分散アルミニウム基複合材料の作製
- ガストンネル型プラズマ溶射によるZr基金属ガラス膜の耐食性
- はんだのぬれ性改善を目的としたCu/Cu-Zr系金属ガラスクラッド材料の開発
- 1.8GPaの引張強度を有するCu-4at%Zr合金線材の強化機構
- 高速ガスフレーム溶射法を用いたNi-Cr-P-B合金被覆燃料電池セパレータの創製とそのXPS表面分析
- Plastic Working of Metallic Glass Bolts by Cold Thread Rolling
- 最大で2.2GPaの引張強度を持つCu-Zr合金線材の開発とそのミクロ組織
- Suppression of Crystallization in Ti-Based Alloys by Fluxing
- Ti基金属ガラス生体活性向上のためのフェムト秒レーザーによる表面形態変化
- 25aEG-10 Ni_Nb_Zr_金属ガラスの構造緩和と低温比熱(25aEG 液体金属,領域6(金属,超低温,超伝導・密度波))
- Cu薄膜溶着Cu-Zr系金属ガラスの開発とはんだぬれ性
- Production of Ni-P Amorphous Alloy-Coated Bipolar Plate for PEM Fuel Cell by Electro-Less Plating
- Fabrication of Fe-Based Metallic Glass Particle Reinforced Al-Based Composite Materials by Friction Stir Processing
- 高圧水素を用いたポーラスバルク金属ガラスの創製
- Cu-Zr系金属ガラスのCuによる表面改質とハンダのぬれ特性
- 23pGD-9 Ni-Nb-Zr3元金属ガラスの比熱と熱的安定性(23pGD 液体金属,領域6(金属,超低温,超伝導・密度波))
- Ni基バルク金属ガラスの疲労特性
- 無電解めっき法を用いたNi-Pアモルファス合金被覆燃料電池用セパレータの作製
- Zr_Ni_Cu_6Al_8バルク金属ガラスの引張塑性変形機構
- Zr-Cu-Alバルク金属ガラスをマトリックスとする複合材料の塑性変形挙動
- Effect of Minor Sn Additions on the Formation and Properties of TiCuZrPd Bulk Glassy Alloy
- 高導電性Cu-0.5,1,2at%Zr合金線材のミクロ組織と機械的性質
- 630 Cu/Cu-Zr系金属ガラスクラッド材料の開発(表面改質,一般セッション)
- Interface Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded Joints between Zr_Cu_Ni_5Al_ Bulk Metallic Glass and Pure Al
- Development and Microstructure of Cu-Zr Alloy Wire with Ultimate Tensile Strength of 2.2 GPa
- Cu薄膜溶着Cu-Zr系金属ガラスの開発とはんだぬれ性