XPS Study of Corrosion Behavior of Ti-18Nb-4Sn Shape Memory Alloy in a 0.05mass%HCl Solution
スポンサーリンク
概要
- 論文の詳細を見る
- 2003-07-01
著者
-
Hanada Shuji
Institute For Materials Research Tohoku University
-
WATANABE Sadao
Institute for Materials Research, Tohoku University
-
Watanabe Sadao
Institute For Materials Research Tohoku University
-
ASAMI Katsuhiko
Institute for Materials Research, Tohoku University
-
Hanada Shuji
Institute For Materials Research Tohoku Univ.
-
Asami Katsuhiko
Institute For Materials Research Tohoku University
-
Kawashima Asahi
The Oarai Branch Institute For Materials Research Tohoku University
-
Asami Katsuhiko
Institute For Material Research Tohoku University
-
Hanada Shuji
Institute for Material Research, Tohoku University
関連論文
- Influence of vacuum annealing conditions on the surface oxidation and vacancy condensation in the surface of an FeAl single crystal
- Beta TiNbSn Alloys with Low Young's Modulus and High Strength
- Beta Ti Alloys with Low Young's Modulus
- High Strength Ni-Fe-W and Ni-Fe-W-P Alloys Produced by Electrodeposition
- Texture Control and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite Rods
- Microstructure and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite
- Surface Characterization of Amorphous Zr-Al-(Ni, Cu) Alloys Immersed in Cell-Culture Medium
- Microstructure and Orientation Distribution of Aragonite Crystals in Nacreous Layer of Pearl Shells
- Fabrication and Mechanical Properties of Porous Co-Cr-Mo Alloy Compacts without Ni Addition
- Quick Report : Possibility of Another Commensurate-Incommensurate Transition of The Omega Phase in B.C.C. Titanium Alloys : Unsettle Matter of The Electron-Lattice Coupling
- Mechanical Properties of Nb-18Si-5Mo-5Hf-2C In-Situ Composite Prepared by Arc-Casting Method
- Effect of W Addition on Compressive Strength of Nb-10Mo-10Ti-18Si-Base In-Situ Composites
- Superconducting Properties of Nb_3Al Wires Fabricated by the Clad-Chip Extrusion Method(Low-T_c Superconducting Materials Research)
- Effect of Pressure Application by HIP on Microstructure Evolution during Diffusion Bonding
- Nanoporous Surfaces of FeAl Formed by Vacancy Clustering
- Fabrication and Corrosion Property of Novel Ti-Based Bulk Glassy Alloys without Ni
- Microstructure and Corrosion Resistance of Ti-Zr-Cu-Pd-Sn Glassy and Nanocrystalline Alloys
- Effect of Tantalum on Corrosion Resistance of Ni-Nb(-Ta)-Ti-Zr Glassy Alloys at High Temperature
- New Cu-Zr-Al-Nb Bulk Glassy Alloys with High Corrosion Resistance
- Glassy Ni-Ta-Ti-Zr(-Co) Alloys with High Thermal Stability and High Corrosion Resistance
- Formation, Thermal Stability, Mechanical Properties and Corrosion Resistance of Cu-Zr-Ti-Ni-Nb Bulk Glassy Alloys
- Effects of Additional Elements on the Glass Formation and Corrosion Behavior of Bulk Glassy Cu-Hf-Ti Alloys
- Corrosion Behavior of Cu-Zr-Ti-Nb Bulk Glassy Alloys
- Effects of Chromium on the Glass Formation and Corrosion Behavior of Bulk Glassy Fe-Cr-Mo-C-B Alloys
- Formation of Bulk Glassy Ni-(Co-)Nb-Ti-Zr Alloys with High Corrosion Resistance
- New Fe-Cr-Mo-(Nb, Ta)-C-B Glassy Alloys with High Glass-Forming Ability and Good Corrosion Resistance
- Hydrogen Evolution Characteristics of Sputter-Deposited Co-Mo, Co-Al and Co-Mo-Al Alloy Electrodes in NaOH Solution
- Application of Sputter Deposition Technique to the Preparation of Amorphous Alloy-Derived Catalysts for NO Decomposition
- The Microcomposite Structure of Catalysts Prepared by Oxidation of Amorphous Ni-Ta-Pd Alloys
- The Corrosion Behavior of Ni-Ta-5P Alloys in Concentrated Hydrochloric Acid
- CO_2 Methanation Catalysts Prepared from Amorphous Ni-Valve Metal Alloys Containing Platinum Group Elements
- The Electrocatalytic Oxidation of Ethylene and Methane, and Reduction of Oxygen on Gas-Diffusion Electrodes Made of Amorphous Nickel-Valve Metal-Platinum Group Metal Alloys
- The Corrosion Behavior of Sputter-Deposited Magnesium-Valve Metal Alloys
- Characterization of Surface Oxide Film Formed on Ti-8Fe-8Ta-4Zr
- Origin of Hydrogen in Anodized Niobium
- Synthesis of Mo–Si–B in situ composites by mechanical alloying
- Oxidation behavior of Mo-Si-B in-situ Composites
- Mechanical Properties of Mo-Nb-TiC In-situ Composites Synthesized by Hot-Pressing
- Microstructure and Creep of Mo-ZrC In-situ Composite
- Amorphous Co-Ni-P Alloys with High Saturation Magnetization Produced by Electrodeposition
- Effect of Sodium Hypophosphite on the Structure and Properties of Electrodeposited Ni-W-P Alloys
- Phase Equilibria in Nb-W-rich Zone of the Nb-W-Si Ternary System
- Influence of Boron Addition on High Temperature Mechanical Properties of Nb_3Ir Intermetallic Compounds
- Phase Equilibria in Nb-Mo-Rich Zone of the Nb-Si-Mo Ternary System
- XPS Characterization of the Surface Oxide Film of 316L Stainless Steel Samples that were Located in Quasi-Biological Environments
- Effect of Heat Treatment and Sn Content on Superelasticity in Biocompatible TiNbSn Alloys
- Microstructure and Oxidation Behavior of Low Pressure Plasma Sprayed Iron Aluminides
- Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys
- Amorphous Alloy Electrodes for Electro-oxidation of Propane
- Microstructure and Critical Current Density of YBa_2Cu_3O_-Ag Composites Compressed at High Temperature
- Effect of Oxygen on Yield Stress and Slip Plane in Nb, Nb-Ta and Nb-Mo Single Crystals
- Phase Compatibility and Superconductivity of Y-Ba-Cu-O Compounds : Electrical Properties of Condensed Matter
- Microstructures and Mechanical Properties of Porosity-Graded Pure Titanium Compacts
- Microstructures and Mechanical Properties of Porous Titanium Compacts Prepared by Powder Sintering
- Microstructure Evolution Mechanism in Iron Aluminides/CrMo Steel Composite Prepared by Solid State Bonding
- Effect of Cr Addition on Microstructure and Mechanical Properties in Nb-Si-Mo Base Multiphase Alloys
- Surface Oxidation of Fe-48 mol%Al Single Crystal under a High Vacuum
- Synthesis of Nb/Nb_5Si_3 in-situ Composites by Mechanical Milling and Reactive Spark Plasma Sintering
- Microstructures and Mechanical Properties of NB/Nb-Silicide in-situ composites Synthesized by Reactive Hot Pressing of Ball Milled Powders
- Effect of Alloy Chemistry on the High Temperature Strengths and Room Temperature Fracture Toughness of Advanced Nb-Based Alloys
- Surface Characterization and Anodic Polarization of Nitrogen-Ion-Implanted Nickel-Free Co-Cr-Mo Alloy
- Electrodeposited Co-Ni-Fe-C Alloys for Hydrogen Evolution in a Hot 8kmol・m^ NaOH
- Electrodeposited Co-Fe and Co-Fe-C Alloys for Hydrogen Evolution in a Hot 8 kmol m^ NaOH Solution
- Effects of Ion Etching and Annealing in O_2 Atmosphere Following Ion Etching on Properties and Chemistry of Sr_Bi_Ta_2O_ Thin Films
- Microstructure and Strength of NbCr_2/Cr in-situ Composites
- Effects of H_2 Sintering and Pt Upper Electrode on Metallic Bi Content in Sr_Bi_Ta_2O_9 Thin Films for Ferroelectric Memories Prepared by Sol-Gel Method
- Diffusion Bonding Associated with Phase Transformation in (γ+β) Micro-duplex Titanium Aluminides
- Effect of W Alloying and NbC Dispersion on High Temperature Strength at 1773K and Room Temperature Fracture Toughness in Nb_5Si_3/Nb In-situ Composites
- Microstructure and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG Eutectic Composite
- XPS Study of Corrosion Behavior of Ti-18Nb-4Sn Shape Memory Alloy in a 0.05mass%HCl Solution
- Surface Oxide Films on Titanium Alloys Regenerated in Hanks' Solution
- Characterization of the Surface Oxide Film on an Fe-Cr-Mo-N System Alloy in Environments Simulating the Human Body
- Characterization of the Surface Oxide Film on an Fe-Cr-N System Alloy in Environments Simulating the Human Body
- Corrosion behavior and surface characterization of Ti-20Cr alloy in a solution containing fluoride
- Characterization of Small Areas of Thin-Films by Grazing-Exit Electron Probe X-ray Microanalysis
- Effect of Strain Rate on the High-Temperature Deformation Behavior of Nb_3Al Hipped from Prealloyed Powder
- Nanocrystalline Manganese-Molybdenum-Tungsten Oxide Anodes for Oxygen Evolution in Acidic Seawater Electrolysis
- Anodically Deposited Mn-Mo-Fe Oxide Anodes for Oxygen Evolution in Hot Seawater Electrolysis
- Characterization of Surface of Amorphous Ni-Nb-Ta-P Alloys Passivated in a 12kmol/m^3 HCl Solution
- Characterization of the Surface Oxide Film of Nickel-free Austenitic Stainless Steel Located in Simulated Body Environments
- Surface Modification of Titanium Utilizing a Repassivation Reaction in Aqueous Solutions
- Corrosion Behavior of Amorphous Nickel-Base Alloys in a Boiling Concentrated Sodium Hydroxide Solution
- Surface Characterization of Sputter-Deposited Cu-Ta Alloys by Auger Electron Spectroscopy
- Characterization of Amorphous Zr-Cu Alloy Surfaces by Electron Probe Microanalysis and Auger Electron Spectroscopy
- Evaluation of Degradability of CaTiO_3 Thin Films in Simulated Body Fluids
- Characterization of Rust Layers on Weathering Steels Air-Exposed for a Long Period
- Mechanism of Chemical Conversion Coating Film Growth on Magnesium and Magnesium Alloys
- Silicon Contamination Adsorbed on Pure Titanium Plate during Soaking Test in Hanks' Balanced Saline Solution
- Effect of Zr, Sn and Al Additions on Deformation Mode and Beta Phase Stability of Metastable Beta Ti Alloys.
- Effects of H2 Sintering and Pt Upper Electrode on Metallic Bi Content in Sr0.9Bi2.1Ta2O9 Thin Films for Ferroelectric Memories Prepared by Sol-Gel Method