Effect of Oxygen on Yield Stress and Slip Plane in Nb, Nb-Ta and Nb-Mo Single Crystals
スポンサーリンク
概要
著者
-
三浦 永理
長崎大院・医歯薬・生体材料
-
Hanada Shuji
Institute For Materials Research Tohoku University
-
Yoshimi Kyosuke
Institute For Materials Research Tohoku University
-
Hanada Shuji
Institute For Materials Research Tohoku Univ.
-
MIURA Eri
Institute for Materials Research, Tohoku University
-
Miura Eri
Institute For Materials Research Tohoku University
-
HANADA Shuji
Institute for Materials Research, Tohoku University
-
Hanada Shuji
Institute for Material Research, Tohoku University
関連論文
- Influence of vacuum annealing conditions on the surface oxidation and vacancy condensation in the surface of an FeAl single crystal
- P-49 分光測色法によるパラジウム無添加歯科用低カラット金合金の光学特性の解析(材料,一般講演(ポスター発表),第47回日本歯科理工学会学術講演会・総会)
- A-1 動電位分極実験によるパラジウム無添加歯科用低カラット金合金の0.9%NaCl水溶液中における耐食性の評価(腐食,一般講演(口頭発表),第47回日本歯科理工学会学術講演会・総会)
- 試作パラジウム無添加歯科用低カラット金合金の光学的性質に及ぼす合金組成の影響
- ステンレス鋼の抗薗性に及ぼす結晶構造の影響 (平成21年度研究報告)
- P-44 赤外線ろう接によるTi-6Al-7Nb/Pd_Cu_Ni_P_金属ガラス接合界面の透過電子顕微鏡観察(チタン, 第49回日本歯科理工学会学術講演会)
- チタン-陶材焼付合金界面反応への金コーティングの効果
- 歯科用金銀パラジウム合金の微細組織に対する銀・銅組成の影響(歯科用合金, 平成17年度秋期 (長崎) 第46回日本歯科理工学会学術講演会)
- 試作歯科用Ti-Zr-Sn系合金の鋳造性と機械的性質
- 歯科用金銀パラジウム合金に見られるナノ析出物
- P-53 歯科用金 : 白金系合金の色調のメカニズム(歯科用合金)(平成16年秋期第44回日本歯科理工学会学術講演会)
- P-38 Ti-Zr-Sn系試作合金の引張試験及び鋳巣の観察(歯科用合金・鋳造)
- 金蒸着したチタン-陶材焼付界面構造の断面TEM観察
- 歯科用合金における粒界析出反応のフラクタル解析
- 高温容体化処理した歯科用金銀パラジウム合金の強化メカニズムの解明
- Ti Zr Sn系チタン合金の鋳造性についての評価
- 金-白金系合金の光学的性質に及ぼすインジウム、鉄、亜鉛、スズ添加の影響
- チタン/陶材焼付界面の剥離部位の決定
- 歯科用合金における粒界反応のフラクタル解析
- TEM-EELS法によるチタン系セラモメタル界面の局所状態分析の試み
- A-9 マイクロビームX線回折を用いたTi-6Al-7Nb合金摩耗表面に関する研究(金属1,第52回日本歯科理工学会学術講演会)
- 赤外線ろう接器でろう着したTi-Al-Nbの接合組織
- 遠心力と粉末冶金の手法を同時に利用した傾斜機能材料製造法
- 遠心力混合粉末法を用いた傾斜機能砥石の製造とCFRP穴あけ加工への応用
- Beta TiNbSn Alloys with Low Young's Modulus and High Strength
- Beta Ti Alloys with Low Young's Modulus
- Texture Control and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite Rods
- Microstructure and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite
- Microstructure and Orientation Distribution of Aragonite Crystals in Nacreous Layer of Pearl Shells
- Fabrication and Mechanical Properties of Porous Co-Cr-Mo Alloy Compacts without Ni Addition
- Quick Report : Possibility of Another Commensurate-Incommensurate Transition of The Omega Phase in B.C.C. Titanium Alloys : Unsettle Matter of The Electron-Lattice Coupling
- Mechanical Properties of Nb-18Si-5Mo-5Hf-2C In-Situ Composite Prepared by Arc-Casting Method
- Effect of W Addition on Compressive Strength of Nb-10Mo-10Ti-18Si-Base In-Situ Composites
- Superconducting Properties of Nb_3Al Wires Fabricated by the Clad-Chip Extrusion Method(Low-T_c Superconducting Materials Research)
- Effect of Pressure Application by HIP on Microstructure Evolution during Diffusion Bonding
- Mechanical Property and Corrosion Resistance Evaluations of Ti-6Al-7Nb Alloy Brazed with Bulk Metallic Glasses
- Nanoporous Surfaces of FeAl Formed by Vacancy Clustering
- 口腔内温度時効硬化性金合金のレーザー溶接に関する研究
- チタン/陶材焼付材の剥離面の組織観察
- P-4 微分パルスボルタンメトリーによる歯科用貴金属合金の耐食性評価(第52回日本歯科理工学会学術講演会)
- P-49 分光測色法による歯科用合金の耐変色性の検討(歯科用金属・鋳造,第51回日本歯科理工学会学術講演会)
- P-48 歯科用金一白金系合金の彩度と色相に及ぼす添加元素の影響(歯科用合金, 第49回日本歯科理工学会学術講演会)
- P-16 試作歯科用Ag-Au-Pt-Cu系合金の耐変色性に及ぼす組成と微細組織の影響(金属,一般講演(ポスター発表),第48回日本歯科理工学会学術講演会)
- Synthesis of Mo–Si–B in situ composites by mechanical alloying
- Oxidation behavior of Mo-Si-B in-situ Composites
- Mechanical Properties of Mo-Nb-TiC In-situ Composites Synthesized by Hot-Pressing
- Microstructure and Creep of Mo-ZrC In-situ Composite
- Phase Equilibria in Nb-W-rich Zone of the Nb-W-Si Ternary System
- Influence of Boron Addition on High Temperature Mechanical Properties of Nb_3Ir Intermetallic Compounds
- Phase Equilibria in Nb-Mo-Rich Zone of the Nb-Si-Mo Ternary System
- Effect of Gold Coating on Interfacial Reaction between Dental Porcelain and Titanium
- Effect of Heat Treatment and Sn Content on Superelasticity in Biocompatible TiNbSn Alloys
- Microstructure and Oxidation Behavior of Low Pressure Plasma Sprayed Iron Aluminides
- パラジウム無添加ポーセレン焼付用金合金の光学的性質に及ぼす添加元素の影響
- Microstructure and Critical Current Density of YBa_2Cu_3O_-Ag Composites Compressed at High Temperature
- Effect of Oxygen on Yield Stress and Slip Plane in Nb, Nb-Ta and Nb-Mo Single Crystals
- Phase Compatibility and Superconductivity of Y-Ba-Cu-O Compounds : Electrical Properties of Condensed Matter
- Microstructures and Mechanical Properties of Porosity-Graded Pure Titanium Compacts
- Microstructures and Mechanical Properties of Porous Titanium Compacts Prepared by Powder Sintering
- Microstructure Evolution Mechanism in Iron Aluminides/CrMo Steel Composite Prepared by Solid State Bonding
- Effect of Cr Addition on Microstructure and Mechanical Properties in Nb-Si-Mo Base Multiphase Alloys
- Surface Oxidation of Fe-48 mol%Al Single Crystal under a High Vacuum
- チタン/陶材焼付界面微細構造のTEM観察
- Synthesis of Nb/Nb_5Si_3 in-situ Composites by Mechanical Milling and Reactive Spark Plasma Sintering
- Microstructures and Mechanical Properties of NB/Nb-Silicide in-situ composites Synthesized by Reactive Hot Pressing of Ball Milled Powders
- Effect of Alloy Chemistry on the High Temperature Strengths and Room Temperature Fracture Toughness of Advanced Nb-Based Alloys
- Microstructure and Strength of NbCr_2/Cr in-situ Composites
- Diffusion Bonding Associated with Phase Transformation in (γ+β) Micro-duplex Titanium Aluminides
- Effect of W Alloying and NbC Dispersion on High Temperature Strength at 1773K and Room Temperature Fracture Toughness in Nb_5Si_3/Nb In-situ Composites
- Microstructure and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG Eutectic Composite
- XPS Study of Corrosion Behavior of Ti-18Nb-4Sn Shape Memory Alloy in a 0.05mass%HCl Solution
- TEM examination on two types of transformation sequence of checkeboard-like microstructure in Au-Cu-Pd ternary alloys
- ステンレス鋼の抗菌性に及ぼす結晶構造の影響
- Effect of Strain Rate on the High-Temperature Deformation Behavior of Nb_3Al Hipped from Prealloyed Powder
- Ordering Behaviors and Age-hardening in AuCu-Zn Pseudobinary Alloys
- Partial phase diagram for the AuCu-Zn pseudobinary system
- Effects of Zn Addition to AuCu on Age-hardening Behaviors at Intraoral Temperature
- 遠心成形との組み合わせによる新しい焼結技術の提案
- 518 遠心力混合粉末法によるナノ粒子分散型金属基傾斜機能材料の創製(金属/金属基複合材料)
- J0404-1-5 ショットピーニングおよび摩擦摩耗を施したFe-Ni合金における加工変質層の形成挙動([J0404-1]知的材料・構造システム(1):新機能材料I)
- チタン系生体材料のための新しいろう材開発 (特集 第5回21世紀の境界領域研究を考えるシンポジウム)
- 摩擦摩耗による特異ナノ構造層の形成挙動
- 341 切削屑を利用した遠心鋳造製銅合金軸受保持器の開発(知的材料・構造システムおよび複合機能化材料・デバイス(4),ものづくりにおける基礎研究と先端技術の融合)
- Effects of Dispersoids on Wear Behavior of Cu-Based Nanocomposite Containing SiO Nanoparticles (Special Issue : Advanced Plasma Science and Its Applications for Nitrides and Nanomaterials)
- Experimental Study on Severe Plastic Deformation of Ti by Novel Equal-Channel Angular Pressing (Special Issue : Advanced Plasma Science and Its Applications for Nitrides and Nanomaterials)
- 反応遠心力混合粉末法を利用したマグネシウム基傾斜機能材料の製造
- Effect of Zr, Sn and Al Additions on Deformation Mode and Beta Phase Stability of Metastable Beta Ti Alloys.