Effect of Zr, Sn and Al Additions on Deformation Mode and Beta Phase Stability of Metastable Beta Ti Alloys.
スポンサーリンク
概要
- 論文の詳細を見る
The relation between deformation mode and β phase stability was investigated using Ti-16V and Ti-7Cr base alloys doped with Sn, Zr and Al as ternary or quaternary additions. Sn and Al additions change the dominant deformation mode from (332) twinning in the binary alloys to deformation induced martensitic transformation, which is related to the suppression of athermal ω phase transformation by the addition of these elements. The deformation induced martensite has orthorhombic structure (α") or hexagonal structure (α') depending on the alloying element. On the other hand, Zr addition has no significant influence on deformation mode and athermal ω phase transformation, and thus the dominant deformation mode of Zr added alloys is (332) twinning identical to the binary alloys. Discrepancy in deformation mode observed in metastable β titanium alloys can be explained reasonably by considering the present results on the effect of Sn, Zr and Al on the deformation mode.
- The Iron and Steel Institute of Japanの論文
著者
関連論文
- Beta TiNbSn Alloys with Low Young's Modulus and High Strength
- Beta Ti Alloys with Low Young's Modulus
- Texture Control and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite Rods
- Microstructure and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG/ZrO_2 Eutectic Composite
- Microstructure and Orientation Distribution of Aragonite Crystals in Nacreous Layer of Pearl Shells
- Fabrication and Mechanical Properties of Porous Co-Cr-Mo Alloy Compacts without Ni Addition
- Quick Report : Possibility of Another Commensurate-Incommensurate Transition of The Omega Phase in B.C.C. Titanium Alloys : Unsettle Matter of The Electron-Lattice Coupling
- Mechanical Properties of Nb-18Si-5Mo-5Hf-2C In-Situ Composite Prepared by Arc-Casting Method
- Effect of W Addition on Compressive Strength of Nb-10Mo-10Ti-18Si-Base In-Situ Composites
- Superconducting Properties of Nb_3Al Wires Fabricated by the Clad-Chip Extrusion Method(Low-T_c Superconducting Materials Research)
- Effect of Pressure Application by HIP on Microstructure Evolution during Diffusion Bonding
- Nanoporous Surfaces of FeAl Formed by Vacancy Clustering
- Mechanical Properties of Mo-Nb-TiC In-situ Composites Synthesized by Hot-Pressing
- Microstructure and Creep of Mo-ZrC In-situ Composite
- Phase Equilibria in Nb-W-rich Zone of the Nb-W-Si Ternary System
- Influence of Boron Addition on High Temperature Mechanical Properties of Nb_3Ir Intermetallic Compounds
- Phase Equilibria in Nb-Mo-Rich Zone of the Nb-Si-Mo Ternary System
- Effect of Heat Treatment and Sn Content on Superelasticity in Biocompatible TiNbSn Alloys
- Microstructure and Oxidation Behavior of Low Pressure Plasma Sprayed Iron Aluminides
- Microstructure and Critical Current Density of YBa_2Cu_3O_-Ag Composites Compressed at High Temperature
- Effect of Oxygen on Yield Stress and Slip Plane in Nb, Nb-Ta and Nb-Mo Single Crystals
- Phase Compatibility and Superconductivity of Y-Ba-Cu-O Compounds : Electrical Properties of Condensed Matter
- Microstructures and Mechanical Properties of Porosity-Graded Pure Titanium Compacts
- Microstructures and Mechanical Properties of Porous Titanium Compacts Prepared by Powder Sintering
- Surface Oxidation of Fe-48 mol%Al Single Crystal under a High Vacuum
- Effect of Alloy Chemistry on the High Temperature Strengths and Room Temperature Fracture Toughness of Advanced Nb-Based Alloys
- Microstructure and Strength of NbCr_2/Cr in-situ Composites
- Diffusion Bonding Associated with Phase Transformation in (γ+β) Micro-duplex Titanium Aluminides
- Effect of W Alloying and NbC Dispersion on High Temperature Strength at 1773K and Room Temperature Fracture Toughness in Nb_5Si_3/Nb In-situ Composites
- Microstructure and High-Temperature Strength of Directionally Solidified Al_2O_3/YAG Eutectic Composite
- XPS Study of Corrosion Behavior of Ti-18Nb-4Sn Shape Memory Alloy in a 0.05mass%HCl Solution
- Effect of Strain Rate on the High-Temperature Deformation Behavior of Nb_3Al Hipped from Prealloyed Powder
- Effect of Zr, Sn and Al Additions on Deformation Mode and Beta Phase Stability of Metastable Beta Ti Alloys.