Semitransparent Organic Photodetectors Utilizing Sputter-Deposited Indium Tin Oxide for Top Contact Electrode
スポンサーリンク
概要
- 論文の詳細を見る
Semitransparent organic photodetectors with the heterostructure of copper phthalocyanine (CuPc) and N,N$'$-bis(2,5-di-tert-butylphenyl) 3,4,9,10-perylenedicarboximide (BPPC) were fabricated using sputter-deposited indium tin oxide (ITO) for a top contact electrode, and the $I$–$V$ and frequency characteristics were investigated. To prevent ITO penetration into an organic layer, an amorphous carbon nitride (a-C:N) buffer layer was placed between the organic layer and an ITO electrode. A cutoff frequency of more than 2 MHz was obtained for a semitransparent photodetector by applying a reverse bias voltage of $-2$ V under visible light illumination. We demonstrated that the fabricated semitransparent organic photodetectors can be applicable to a photoreflector with light-emitting diodes for integrated devices with organic light-emitting devices.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2005-04-15
著者
-
MORIMUNE Taichiro
Center for Advanced Science and Innovation, Osaka University
-
Ohmori Yutaka
Center for Advanced Science and Innovation (CASI), Osaka University
-
Kajii Hirotake
Center for Advanced Science and Innovation (CASI), Osaka University
関連論文
- Organic Photovoltaic Cell with Donor-Acceptor Double Heterojunctions
- Transient Properties of Organic Electroluminescent Diode Using 8-HydroXyquinoline Aluminum Doped with Rubrene as an Electro-Optical Conversion Device for Polymeric Integrated Devices
- Gas-Sensitive Schottky Gated Field Effect Transistors Utilizing Poly (3-alkylthiophene) Films
- Fabrication and Characteristics of Schottky Gated Poly(3-alkylthiophene) Field Effect Transistors
- Gas-Sensitive Junction Characteristics of Poly(3-alkylthiophene) Schottky Diodes
- Enhancement of Electroluminescence Intensity from Dye-Doped Poly(3-Alkylthiophene) Light Emitting Diode with Different Alkyl-Side-Chain Length
- Electroluminescent Diodes Utilizing Polysilanes
- Polarity-Dependent Multicolor Organic Electroluminescent Device
- Two-Band Electroluminescent Emission in Organic Electroluminescent Diode with Phthalocyanine Film
- Pulse Response of Electroluminescence in Poly(3-alkylthiophene) Mixed with Fluorescent Dye
- Ultraviolet Electroluminescent Diode Utilizing Poly(methylphenylsilane)
- Unique Electroluminescent Characteristics of Light-Emitting Diode Utilizing Poly(3-alkylthiophene) Containing Fluorescent Dye
- Novel Characteristics of Electrolumimescent Diode with Organic Multiple-Quantum-Well Structure
- Polarization Anisotropy of Organic Electroluminescent Diode with Periodic Multilayer Structure Utilizing 8-Hydroxyquinoline Aluminum and Aromatic Diamine
- Color-Variable Electroluminescent Diode with Single Quantum Well Structure Utilizing 8-Hydroxyquinoline Aluminum and Aromatic Diamine
- Efficient Energy Transfer in Organic Multilayer Structure Utilizing 8-Hydroxyquinoline Aluminum and Aromatic Diamine
- Unique Dynamic Characteristics of Electroluminescent Diode with Superlattice Structure Utilizing Cyclopentadiene Derivative and Aromatic Diamine
- Novel Optical and Electroluminescent Characteristics in Organic Superlattice Structure Utilizing Cyclopentadiene Derivative and Aromatic Diamine
- Enhancement of Emission Efficiency in Electroluminescent Diode Utilizing Vapor-Deposited Poly(alkylfluorene)
- Organic Electroluminescence Devices Using Poly(arylene vinylene) Conductirng Polymers
- Color-Variable Light-Emitting Diode Utilizing Conducting Polymer Containing Fluorescent Dye
- Time-Resolved Pulse Response of Electroluminescence in Poly(3-alkylthiophene) Diodes
- Electroluminescence from Visible to Near-Infrared Spectral Range in Buckminsterfullerene Diode
- Blue Electroluminescent Diodes Utilizing Poly(alkylfluorene)
- Visible-Light Electroluminescent Diodes Utilizing Poly(3-alkylthiophene)
- Novel Fluorescent Aluminum Complexes Based on N-Hydroxy-3,6-diaryl-4-phenyl-2-pyridone Ligands
- Synthesis and Spectroscopic Properties of New Fluorescent 3,6-Diaryl-4-phenyl-2-pyridone Derivatives
- Investigation of Photoluminescence and Electroluminescence in Combination of Eu Complex and Blue Phosphorescent Dye Doped System(Organic Molecular Electronics)
- Efficient red electrophosphorescent devices based on starburst molecules
- Application of Organic Light Emitting Diode Based on the Alq3 Emissive Layer to the Electro-Optical Conversion Device(Special Issue on Recent Progress in Organic Molecular Electronics)
- Enhanced Electroluminescence in Organic Light-Emitting Diodes Utilizing Co-doped Emissive Layer for Red Light Emission (Special Issue on Organic Molecular Electronics for the 21st Century)
- Multicolor Organic Light Emitting Diodes with RGB Emission(Special Issue on Organic Materials for Optics and Electronics)
- Improvement of Electrode/Organic Layer Interfaces by the Insertion of Monolayer-like Aluminum Oxide Film
- Enhanced Emission from Europium Complex Utilizing Quantum-Well Structure in Organic Electroluminescent Device
- Control of Organic Interface with a Thin Film of Silicon Monoxide between 8-Hydroxyquinoline Aluminum and Diamine Layers in an Organic EL Diode
- Nonlinear Emission from 8-Hydroxyquinoline Aluminum and Diamime Derivative Superlattice Structures Excited by Third-Harmonic-Generation from Nd:YAG Laser Light
- Voltage- and Polarity-Tunable Multicolor Organic Electroluminescent Devices
- Organic Photodetectors Using Triplet Materials Doped in Polyalkylfluorene
- Polymer Light-Emitting Diodes Using Poly(9,9-dioctylfuorene) Gel by Thermal Printing Method
- Effects of CsF/Metal Cathode Interface on Electron Injection in Organic Light-Emitting Diodes Fabricated by Wet-Process
- Polymer Device of Poly(3-hexylthiophene) with a Cathode Fabricated from Silver Nanoparticles by Wet Processing
- Semitransparent Organic Photodetectors Utilizing Sputter-Deposited Indium Tin Oxide for Top Contact Electrode
- Flexible Organic Field-Effect Transistors Based on the Composites with the Same Thiophene Backbone by Wet Process(Organic Molecular Devices,Towards the Realization of Organic Molecular Electronics)
- Flexible organic field-effect transistors based on the composites with the same backbone by wet process(Organic molecular devices)
- Oligothiophene Organic Transistors Using Poly(3-hexylthiophene) Fabricated by Spin Coating
- Organic Light Emitting Diode Using Starburst Molecule Doped with Rubrene Fabricated by Wet-Processing for Application on an Electro-Optical Conversion Device(Characterization and Abilities of Organic Electronic Devices)(Recent Progress in
- Fabrication and Characteristics of Low-Molecular Phosphorescent Organic Light-Emitting Diodes Employed by Wet-Process(Characterization and Abilities of Organic Electronic Devices)(Recent Progress in Organic Molecular Electronics)
- Study of the transient electroluminescence process using organic light-emitting diodes with a partial doping layer
- MoO3 as a Cathode Buffer Layer Material for the Improvement of Planar pn-Heterojunction Organic Solar Cell Performance
- Electrical and Optical Properties of Organic Thin Film Multilayer Structure and Its Application for Electroluminescent Diode (Special Section on Organic Functional Devices)
- Photoluminescence Quenching under Reverse Bias in Organic Multilayer Structure Utilizing 8-Hydroxyquinoline Aluminum and Aromatic Diamine
- Observation of Anomalous Current-Voltage Characteristics in Organic Multilayer-Structure Diode
- Multilayer Polyfluorene-Based Light-Emitting Diodes for Frequency Response Up to 100MHz
- Fabrication and Characteristics of Schottky Gated Field Effect Transistors Utilizing Poly(1, 4-naphthalene vinylene) and Poly(p-phenylene vinylene)
- Transient Electroluminescence of White Organic Light-Emitting Diodes with Blue Phosphorescent and Red Fluorescent Emissive Layers
- Organic Display Devices Using Poly (Arylene Vinylene) Conducting Polymers (Special Section on Organic Functional Devices)
- Polymer Light-Emitting Diodes Fabricated Using Poly(9,9-dioctylfuorene) Gel by Thermal Printing Method
- Study of Transient Electroluminescence Process Using Organic Light-Emitting Diode with Partial Doping Layer
- Investigation of Interfaces between Insulator and Active Layer, and between Active Layer and Electrodes in n-Type Organic Field-Effect Transistors
- Organic Light-Emitting Diodes with Highly Conductive Polymer Electrodes as Anode and Their Stress Tolerance
- High-Speed Organic Photodetectors Using Heterostructure with Phthalocyanine and Perylene Derivative
- Effect of Hydroxyl Group of Polymer Gate Insulators on Characteristics of Dihexylsexithiophene Organic Field-Effect Transistors Using Poly(p-silsesquioxane) Derivatives
- Effects of CsF/Metal Interface on Electron Injection in Polymer Light-Emitting Diodes
- Polymer Device of Poly(3-hexylthiophene) with a Cathode Fabricated from Silver Nanoparticles by Wet Processing
- Red Phosphorescent Organic Light-Emitting Diodes Using Mixture System of Small-Molecule and Polymer Host
- Semitransparent Organic Photodetectors Utilizing Sputter-Deposited Indium Tin Oxide for Top Contact Electrode