Study on Polishing of CVD Diamond Film (3rd report):-An attempt of polishing flat surface with non abrasive ultrasonic vibration polishing-
スポンサーリンク
概要
- 論文の詳細を見る
"Non abrasive ultrasonic vibration polishing" had been proposed as a new polishing method of CVD diamond film and it was clarified that CVD diamond film can be polished smoothly and continuously by using pure titanium as tool material and spreading thin oil film on work surface. In order to apply this method to practical use such as low friction forming tool, polishing of plane surface with this method was attempted and following results are obtained. (1)Combination of tool feed direction and ultrasonic vibration direction influences the roughness of polished surface, (2) It is possible to polish plane area of CVD diamond film by overlapping linear polishing mark in perpendicular to tool feed direction, (3)CVD diamond film can be polished homogeneously by the combination of polishing direction,(4)Roughness of CVD diamond film polished by this method reaches 0.06μm to 0.08μm in Ra, 0.4μm to 0.5 μm in Rz.
著者
関連論文
- 風損を利用した高速スピンドルの出力測定法の研究
- 小径の内面研削加工に関する研究 : 第2報 : ドレッシング条件が研削性能に及ぼす影響
- 小径の内面研削加工に関する研究 : 第1報 : 軸受特性の比較
- 空気軸受スピンドルによる内径研削に関する研究(第4報) 転がり軸受との研削状態の比較
- Rapid Rotation Grinding による高品位・高能率加工 : 第2報 : 工作物高周速度域の研削現象
- Rapid Rotation Grinding による高品位・高能率加工 : 第1報 : ホイールおよび工作物周速度の高速化効果
- 空気軸受スピンドルによる内径研削に関する研究(第6報) : 研削パラメータが研削特性に与える影響
- 空気軸受スピンドルによる内径研削に関する研究(第5報) : ドレッシング及び加工条件が加工精度に与える影響
- 焼結ダイヤモンド工具の効率的研削加工の検討
- 219 焼結ダイヤモンド工具の超音波研削加工特性(OS10 超音波応用加工)
- 焼結ダイヤモンド工具の超音波研削加工特性
- 微粒ビトリファイドダイヤモンドホイールの研削性能に関する一考察
- CVDダイヤモンド膜の研磨に関する研究(第3報) : 砥粒レス超音波研磨法による平面研磨の試み
- 小径穴超音波加工に関する研究 : 第6報 : 共振周波数帯域における加工力の変動と加工速さとの関係
- 小径穴超音波加工に関する研究 : 第5報 : ガラス材種による加工特性の変化
- 小径穴超音波加工に関する研究 : 第4報 : キャビテーション気泡群の影響について
- CVDダイヤモンド膜の研磨に関する研究(第1報) : 超音波振動の援用による砥粒レス超音波研磨法の検討
- 小径穴超音波加工に関する研究 : 第3報 : 工具材質の違いが加工特性に与える影響
- 小径穴超音波加工に関する研究 : 第2報 : 工具小径化が加工速さに与える影響
- 小径穴超音波加工に関する研究 : 第1報 : 種々の加工条件が加工速さに与える影響
- CVDダイヤモンド膜の研磨に関する研究(第2報) : 砥粒レス超音波研磨法による連続研磨の検討
- 粒径制御されたアルミナの研削機構と残留応力
- セラミックスの微構造と被研削性
- 3416 PCDディスクによる小径CBNホイールのツルーイング(S48 砥粒加工,21世紀地球環境革命の機械工学:人・マイクロナノ・エネルギー・環境)
- 研削加工後の表面加熱処理によるセラミックスの強度回復
- 研削加工により強度低下したセラミックスの加熱処理による強度回復
- 加工学・加工機器
- 16.1 切削・研削・研磨加工技術の研究動向
- 加熱処理によるセラミックス研削加工後の強度回復
- 粒径制御されたアルミナ研削加工面のX線残留応力測定に関する一考察
- 単斜晶ジルコニアにより強化されたアルミナの研削抵抗についての一考察
- ホイール剛性を制御したメタルボンドダイヤモンドホイールによるセラミックス加工面の強度低下の抑制
- セラミックスの研削加工面の強度に及ぼすツルーイング条件の影響 : ホイールとツルアの周速比について
- 研削砥石の切れ味試験機の開発
- 研削砥石作業面の摩擦係数による切れ味評価
- 焼入鋼の研削特性
- Study on Polishing of CVD Diamond Film (3rd report):-An attempt of polishing flat surface with non abrasive ultrasonic vibration polishing-