Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes
スポンサーリンク
概要
- 論文の詳細を見る
Carbon nanotube is natures smallest fiber and predicted to have a range of unusual mechanical and electrical properties. One possible route to harnessing these properties for applications would be to incorporate nanotubes in a composite material. Here, we report the mechanical properties of multi-walled carbon nanotube (MWCNT) reinforced alumina composites made with a pristine MWCNT and an acid-treated version that have nanoscale defects on their surfaces from an acid treatment. It was demonstrated that surface modification of the MWCNT is effective in improvement of bending strength and fracture toughness of the MWCNT-reinforced alumina composites. On the basis of the results, we also prepared three sets of the acid-treated MWCNT-reinforced alumina composites having different sintering additives, in order to investigate the effects of sintering additives on their microstructures and mechanical properties. Mechanical properties of the composites were dependent mostly on the type of sintering additives and amount of MWCNT. The 0.9 vol.% acid-treated MWCNT-reinforced alumina composites with MgO sintering additive gave the highest bending strength (689.6 ± 29.1 MPa) and fracture toughness (5.90 ± 0.27 MPa·m1/2), respectively.
著者
-
TAKAGI Toshiyuki
Institute of Fluid Science
-
Kimura Hisamichi
Institute For Material Research Tohoku University
-
Hashida Toshiyuki
Fracture And Reliability Res. Inst. Graduate School Of Engineering Tohoku Univ.
-
Omori Mamoru
Fracture And Reliability Research Institute Tohoku University
-
YAMAMOTO Go
Institute of Fluid Science, Tohoku University
関連論文
- Thermal Fatigue Cracking and Extension Behaviors of Squeeze Infiltrated Al_B_4O_/Mg Functionally Graded Materials
- 22pPSA-16 TbZn_2の強磁場磁化曲線(22pPSA 領域3ポスターセッション(酸化物・f電子系磁性・スピングラス・量子スピン・フラストレーション系・実験技術・磁性一般),領域3(磁性,磁気共鳴))
- 各種ケイ酸ガラスとZr基金属ガラスの陽極接合界面
- 摩擦攪拌接合によるZr基金属ガラス/純Alの異材接合
- ガストンネル型プラズマ溶射によるNi基金属ガラス膜の性質
- 232 Ni基金属ガラス箔の溶接性と重ね継手特性(溶接冶金(VI),平成20年度春季全国大会)
- Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
- 401 Zr_Cu_Ni_5Al_金属ガラスの摩擦攪拌接合(金属ガラス,平成20年度秋季全国大会)
- ガストンネル型プラズマ溶射を用いて作製したZr基金属ガラス膜の組織構造とその性質
- Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes
- 放電プラズマ焼結(SPS)法によるFeO、Fe2O3、Fe3O4の焼結
- Cu-Zr-Ag-Alバルク金属ガラスの平面ひずみ破壊靱性
- 405 金属ガラス複合材料の作製(金属ガラス,平成20年度秋季全国大会)
- バルク金属ガラスの破壊靭性と試験片表面におけるせん断帯長さ, き裂開口変位およびストレッチゾーン幅の関係
- Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
- 30pYK-4 Zr系金属ガラスにおける緩和現象の比熱測定による研究(30pYK 液体金属,領域6(金属,超低温,超伝導・密度波))
- S105 生体用Ti基金属ガラスの熱的安定性、化学的性質および機械的性質(力学適応能,自己組織化能を有するバイオマテリアル-生体インターフェイスの創製,SP1:シンポジウム1)
- 524 金属ガラス生体材料の創製(GS2-1:バイオマテリアル(1))
- 310 ガストンネルプラズマ溶射により作製されたZr基金属ガラス膜の性質(溶射,平成20年度秋季全国大会)
- 327 ガストンネル型プラズマ溶射によるZr系金属ガラス膜の作製(コーティング,平成20年度春季全国大会)
- Hydrogen Permeation Characteristics of Melt-Spun Ni-Nb-Zr Amorphous Alloy Membranes
- Thermal Stability and Mechanical Properties of Glassy and Amorphous Ni-Nb-Zr Alloys Produced by Rapid Solidification
- 406 Ni基金属ガラス箔とステンレス鋼の異材接合特性(金属ガラス,平成20年度秋季全国大会)
- W強化Zr基金属ガラスの作製と特性評価
- 金属ガラス溶射コーティング技術の開発とその応用
- 高強度・高耐熱強度を示すAl合金粉末冶金材の開発
- One-dimensional modeling of stress-induced transformation behaviour of shape memory alloy
- Project artificial myocardium
- Less invasive hemostatic forceps using superelastic SMAs
- 亜共晶組成Zr-Cu-Alバルク金属ガラスの引張挙動およびひずみ速度依存性
- 高速ガスフレーム溶射法(HVOF)によるFe基金属ガラス皮膜の創製
- Zr基金属ガラス-SiO_2の衝撃接合
- 急冷凝固Ni-Nb-Ta-Zr-Coアモルファス合金の水素透過性とメタノール水蒸気改質による水素製造への適用
- Microstructures of Pd_Ag_La_5 Alloy Studied by Transmission Electron Microscopy
- Microstructure and Corrosion Properties of Mg-xSn-5Al-1Zn(x=0, 1, 5 and 9mass%) Alloys
- The Effect of Trace Addition of Strontium and Zinc on the Creep Properties of Mg-6Sn-5Al-2Si Alloys
- Microstructure and Mechanical Properties of P/M Al-V-Fe and Al-Fe-M-Ti (M = V, Cr, Mn) Alloys Containing Dispersed Quasicrystalline Particles
- New Amorphous Alloys in Al-Ti Binary System
- High Strength Al-Ti-Fe Alloys Consisting of Amorphous and fcc-Al Phases Prepared by Rapid Solidification
- High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni)Quasicrystalline Alloys Prepared by Rapid Solidification
- Thermal Stability and Soft Magnetic Properties of Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability
- Preparation of Fe_Co_Ga_5P_C_4B_4 Bulk Glassy Alloy with Good Soft Magnetic Properties by Spark-Plasma Sintering of Glassy Powder
- Structure and Magnetic Properties of Fe_Co_Nb_7B_8 Nanocrystalline Alloy
- Bulk Glassy Co_Fe_Ta_B_ Alloy with High Glass-Forming Ability and Good Soft Magnetic Properties
- The Liquid-Enhanced Plasticity and Deformation Behavior of Cu-Mg-TiC Nanocrystalline Composite
- Bulk Glassy Fe_Co_xGa_2P_C_4B_4 Alloys with High Saturation Magnetization and Good Soft Magnetic Properties
- Bulk Glassy Fe-Ga-P-C-B Alloys with High Saturation Magnetization and Good Soft Magnetic Properties Synthesized by Fluxing Treatment and Copper Mold Casting
- Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
- Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
- Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy
- Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy with Enhanced Compressive Strength and Plasticity at Cryogenic Temperature
- Annealing-Induced Devitrification Behavior of a Ti_Zr_Ni_Cu_ Glassy Alloy
- Corrosion Behavior of Ti-Based Metallic Glasses
- Preparation of a Wide Zr_Al_Ni_5Cu_ Metallic Glass Sheet by a Twin-Roller Type Casting Method and Its Mechanical Properties
- Mechanical Properties of Melt-Spun Amorphous Ni-Nb-Zr Alloys after Hydrogen Charging
- Fracture Toughness of Zr_Al_Ni_5Cu_ Bulk Metallic Glass by 3-Point Bend Testing
- Effect of Tantalum on Corrosion Resistance of Ni-Nb(-Ta)-Ti-Zr Glassy Alloys at High Temperature
- New Cu-Zr-Al-Nb Bulk Glassy Alloys with High Corrosion Resistance
- Excellent Mechanical Properties of Cu-Hf-Ti-Ta Bulk Glassy Alloys Containing In-Situ Dendrite Ta-based BCC Phase
- Fatigue Behaviors of Ultra Fine Wires of β-Type and α-Type Titanium Alloys
- Developments of Aluminum- and Magnesium-Based Nanophase High-Strength Alloys by Use of Melt Quenching-Induced Metastable Phase
- Structural Analysis of Melt-Spun Mg_xPd_ (x = 70, 80, 85 and 90) Amorphous Alloys
- X-ray Diffraction Study for Mg_4Pd Crystalline and Amorphous Alloys Using Synchrotron Radiation
- Glass Transition Behavior of Al-Y-Ni and Al-Ce-Ni Amorphous Alloys : Condensed Matter
- Production of Bi-Sr-Ca-Cu-O Glasses by Liquid Quenching and their Glass Transition and Structural Relaxation : Condensed Matter
- Undercooling Behavior and Critical Cooling Rate of Pd-Pt-Cu-P Alloy
- Isothermal Relaxation Behavior in a Pd_Cu_Ni_P_ Metallic Glass
- Electrical Resistivity and Mossbauer Studies for the Structural Relaxation Process in Pd-Cu-Ni-P Glasses
- Bulk Glassy Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability, High Saturation Magnetization and Good Soft Magnetic Properties
- High Strength and Good Soft Magnetic Properties of Bulk Glassy Fe-Mo-Ga-P-C-B Alloys with High Glass-Forming Ability
- Magnetic-Field Induced Two-Way Shape Memory Effect of Ferromagnetic Ni_2MnGa Sputtered Films
- Shape Memory Behavior of Ni-Mn-Ga Sputtered Films under a Magnetic Field
- Influence of Fe and Co on Phase Transitions in Ni-Mn-Ga Alloys
- Compressive Properties of Ni_2MnGa Produced by Spark Plasma Sintering
- Phase Transformation of Ni_2MnGa Made by the Spark Plasma Sintering Method
- Effect of Grinding Stress on the Phase Transformation of Ni_Mn_Ga Powder
- Shape Memory Alloy Artificial Muscles for Treatments of Fecal Incontinence
- Artificial Baroreflex System Makes Deterministic Chaos
- An SMA Artificial Anal Sphincter Actuated by Transcutaneous Energy Transmission Systems
- An artificial sphincter using shape memory alloy actuators
- Proposal of Thermoelectric Actuator and Development of Active Catheter
- H306 Proposal of Thermoelectric Actuator and Development of Active Catheter(Heat transfer control)
- Magnetic-Field-Induced Stresses and Magnetostrain Effect in Martensite
- W04I Friction Properties of the Partly Polished Polycrystalline CVD Diamond Films(International Workshop on "New Frontiers of Smart Materials and Structural Systems")
- Structural analysis of cobalt containing amorphous hydrogenate carbon film
- Metal-containing diamond-like nanocomposite temperature sensors
- A Study of Quantitative Evaluation for Cracks on Austenite Stainless Steels by Using Multi-coil Type Eddy Current Probe
- Imprinting Bias Stress in Functional Composites
- Electron Transport in Amorphous Carbon-Silicon Nanocomposites Containing Nb
- Frequency Component Analysis of Back-Reflected Surface Acoustic Wave on Diamond-Coated Silicon
- Development of Novel Arrayed Multi-Coil Probes for Eddy Current Testing(NDE4)
- Visual System Experiment of MHD Pump Using Rotating Twisted Magnetic Field Applicable to High-temperature Molten Metals
- In-situ eddy current monitoring of structural components in nuclear power plants
- Electromagnetic Nondestructive Evaluation of Graphite Structures in Flake Graphite Cast Iron
- Recent research activities on ferromagnetic shape memory alloys
- MB-03 MECHANICAL BEHAVIOR OF A THERMOELECTRIC SMA MANIPULATOR
- Localization of Magnetic Field Structure of Multi-Current Loops on Axisymmetrical Model for Transcranial Magnetic Stimulation
- Electron Transport in Amorphous Carbon–Silicon Nanocomposites Containing Nb
- Evaluation of Sensitivity of Remote Field Eddy Current Testing and Low-Frequency Eddy Current Testing for Inspecting Grooves of Metal Plate
- A Numerical Method for Simulation of Nonlinear Eddy Current Testing Signals Based on Transient A_r Formulation