Characterization of Surface Properties, Osteoblast Cell Culture in Vitro and Processing with Flow-Viscosity of Ni-Free Ti-Based Bulk Metallic Glass for Biomaterials
スポンサーリンク
概要
- 論文の詳細を見る
Ni-free type Ti-based metallic glass evaluated in this study has imposing performances for biomaterials that is based on high bulk forming ability (BFA) for implantable materials, superior specific strength, low Youngs modulus as hard tissue replacements and excellent workability. Especially, surface characteristics of Ti-based bulk metallic glass for corrosion resistance exhibit a high potential for application to be used as dental implants in the oral cavity. We also made an examination of chemical stability for human cell test with osteoblasts (SaOS2) in vitro. Results of the good biocompatibility and high glass forming ability evaluated in this study are expected to increase utility value for biomedical application
著者
-
Kimura Hisamichi
Institute For Material Research Tohoku University
-
Hwang Gi-wook
Laboratory Of Molecular And Biochemical Toxicology Graduate School Of Pharmaceutical Sciences Tohoku
-
OAK Jeong-Jung
Institute for Materials Research, Tohoku University
-
Inoue Akihisa
Institiute For Materials Resarch Tohoku University
-
YOON Seog-Young
School of Materials Science and Engineering, Pusan National University
-
PARK Yong-Ha
School of Materials Science & Engineering, Pusan National University
-
YOON Seog-Young
School of Materials Science & Engineering, Pusan National University
関連論文
- Thermal Fatigue Cracking and Extension Behaviors of Squeeze Infiltrated Al_B_4O_/Mg Functionally Graded Materials
- 22pPSA-16 TbZn_2の強磁場磁化曲線(22pPSA 領域3ポスターセッション(酸化物・f電子系磁性・スピングラス・量子スピン・フラストレーション系・実験技術・磁性一般),領域3(磁性,磁気共鳴))
- 各種ケイ酸ガラスとZr基金属ガラスの陽極接合界面
- 摩擦攪拌接合によるZr基金属ガラス/純Alの異材接合
- ガストンネル型プラズマ溶射によるNi基金属ガラス膜の性質
- 232 Ni基金属ガラス箔の溶接性と重ね継手特性(溶接冶金(VI),平成20年度春季全国大会)
- Friction Stir Welding of Zr_Cu_Ni_5Al_ Bulk Metallic Glass
- 401 Zr_Cu_Ni_5Al_金属ガラスの摩擦攪拌接合(金属ガラス,平成20年度秋季全国大会)
- ガストンネル型プラズマ溶射を用いて作製したZr基金属ガラス膜の組織構造とその性質
- Effects of Sintering Additive on Mechanical Properties of Alumina Matrix Composites Reinforced with Carbon Nanotubes
- 放電プラズマ焼結(SPS)法によるFeO、Fe2O3、Fe3O4の焼結
- Cu-Zr-Ag-Alバルク金属ガラスの平面ひずみ破壊靱性
- 405 金属ガラス複合材料の作製(金属ガラス,平成20年度秋季全国大会)
- バルク金属ガラスの破壊靭性と試験片表面におけるせん断帯長さ, き裂開口変位およびストレッチゾーン幅の関係
- Enhanced Tensile Strength and Plasticity of Zr-Cu-Al Bulk Glassy Alloys at Cryogenic Temperatures
- 30pYK-4 Zr系金属ガラスにおける緩和現象の比熱測定による研究(30pYK 液体金属,領域6(金属,超低温,超伝導・密度波))
- S105 生体用Ti基金属ガラスの熱的安定性、化学的性質および機械的性質(力学適応能,自己組織化能を有するバイオマテリアル-生体インターフェイスの創製,SP1:シンポジウム1)
- 524 金属ガラス生体材料の創製(GS2-1:バイオマテリアル(1))
- 310 ガストンネルプラズマ溶射により作製されたZr基金属ガラス膜の性質(溶射,平成20年度秋季全国大会)
- 327 ガストンネル型プラズマ溶射によるZr系金属ガラス膜の作製(コーティング,平成20年度春季全国大会)
- Hydrogen Permeation Characteristics of Melt-Spun Ni-Nb-Zr Amorphous Alloy Membranes
- Thermal Stability and Mechanical Properties of Glassy and Amorphous Ni-Nb-Zr Alloys Produced by Rapid Solidification
- 406 Ni基金属ガラス箔とステンレス鋼の異材接合特性(金属ガラス,平成20年度秋季全国大会)
- W強化Zr基金属ガラスの作製と特性評価
- 金属ガラス溶射コーティング技術の開発とその応用
- 高強度・高耐熱強度を示すAl合金粉末冶金材の開発
- 亜共晶組成Zr-Cu-Alバルク金属ガラスの引張挙動およびひずみ速度依存性
- 高速ガスフレーム溶射法(HVOF)によるFe基金属ガラス皮膜の創製
- Zr基金属ガラス-SiO_2の衝撃接合
- 急冷凝固Ni-Nb-Ta-Zr-Coアモルファス合金の水素透過性とメタノール水蒸気改質による水素製造への適用
- Microstructures of Pd_Ag_La_5 Alloy Studied by Transmission Electron Microscopy
- Microstructure and Corrosion Properties of Mg-xSn-5Al-1Zn(x=0, 1, 5 and 9mass%) Alloys
- The Effect of Trace Addition of Strontium and Zinc on the Creep Properties of Mg-6Sn-5Al-2Si Alloys
- Microstructure and Mechanical Properties of P/M Al-V-Fe and Al-Fe-M-Ti (M = V, Cr, Mn) Alloys Containing Dispersed Quasicrystalline Particles
- New Amorphous Alloys in Al-Ti Binary System
- High Strength Al-Ti-Fe Alloys Consisting of Amorphous and fcc-Al Phases Prepared by Rapid Solidification
- High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni)Quasicrystalline Alloys Prepared by Rapid Solidification
- Thermal Stability and Soft Magnetic Properties of Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability
- Preparation of Fe_Co_Ga_5P_C_4B_4 Bulk Glassy Alloy with Good Soft Magnetic Properties by Spark-Plasma Sintering of Glassy Powder
- Structure and Magnetic Properties of Fe_Co_Nb_7B_8 Nanocrystalline Alloy
- Bulk Glassy Co_Fe_Ta_B_ Alloy with High Glass-Forming Ability and Good Soft Magnetic Properties
- The Liquid-Enhanced Plasticity and Deformation Behavior of Cu-Mg-TiC Nanocrystalline Composite
- Bulk Glassy Fe_Co_xGa_2P_C_4B_4 Alloys with High Saturation Magnetization and Good Soft Magnetic Properties
- Bulk Glassy Fe-Ga-P-C-B Alloys with High Saturation Magnetization and Good Soft Magnetic Properties Synthesized by Fluxing Treatment and Copper Mold Casting
- Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
- Fabrication of ZrCuAlNi Metallic Glassy Matrix Composite Containing ZrO_2 Particles by Spark Plasma Sintering Process
- Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy
- Cu_Zr_Al_5Ag_5 Bulk Glassy Alloy with Enhanced Compressive Strength and Plasticity at Cryogenic Temperature
- Annealing-Induced Devitrification Behavior of a Ti_Zr_Ni_Cu_ Glassy Alloy
- Corrosion Behavior of Ti-Based Metallic Glasses
- Preparation of a Wide Zr_Al_Ni_5Cu_ Metallic Glass Sheet by a Twin-Roller Type Casting Method and Its Mechanical Properties
- Mechanical Properties of Melt-Spun Amorphous Ni-Nb-Zr Alloys after Hydrogen Charging
- Fracture Toughness of Zr_Al_Ni_5Cu_ Bulk Metallic Glass by 3-Point Bend Testing
- Effect of Tantalum on Corrosion Resistance of Ni-Nb(-Ta)-Ti-Zr Glassy Alloys at High Temperature
- New Cu-Zr-Al-Nb Bulk Glassy Alloys with High Corrosion Resistance
- Excellent Mechanical Properties of Cu-Hf-Ti-Ta Bulk Glassy Alloys Containing In-Situ Dendrite Ta-based BCC Phase
- Fatigue Behaviors of Ultra Fine Wires of β-Type and α-Type Titanium Alloys
- Developments of Aluminum- and Magnesium-Based Nanophase High-Strength Alloys by Use of Melt Quenching-Induced Metastable Phase
- Structural Analysis of Melt-Spun Mg_xPd_ (x = 70, 80, 85 and 90) Amorphous Alloys
- X-ray Diffraction Study for Mg_4Pd Crystalline and Amorphous Alloys Using Synchrotron Radiation
- Glass Transition Behavior of Al-Y-Ni and Al-Ce-Ni Amorphous Alloys : Condensed Matter
- Production of Bi-Sr-Ca-Cu-O Glasses by Liquid Quenching and their Glass Transition and Structural Relaxation : Condensed Matter
- Undercooling Behavior and Critical Cooling Rate of Pd-Pt-Cu-P Alloy
- Isothermal Relaxation Behavior in a Pd_Cu_Ni_P_ Metallic Glass
- Electrical Resistivity and Mossbauer Studies for the Structural Relaxation Process in Pd-Cu-Ni-P Glasses
- Bulk Glassy Fe-Co-Ga-P-C-B Alloys with High Glass-Forming Ability, High Saturation Magnetization and Good Soft Magnetic Properties
- High Strength and Good Soft Magnetic Properties of Bulk Glassy Fe-Mo-Ga-P-C-B Alloys with High Glass-Forming Ability
- New Pd-Based Bulk Glassy Alloys with High Glass-Forming Ability and Large Supercooled Liquid Region
- Effect of B Addition on the Extension of Supercooled Liquid Region in Zr-Cu-Al Base Amorphous Alloys
- Preparation and Thermal Stability of Bulk Amorphous Pd_Cu_Ni_P_ Alloy Cylinder of 72mm in Diameter
- Effect of B Addition Extension of Supercooled Liquid Region before Crystallization in Pd-Cu-Si Amorphous Alloys
- Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr_Cu_Al_Ni_5 Bulk Glassy Alloy
- Production of Bulk Glassy Alloy Parts by a Levitation Melting-Forging Method
- Consolidation of Fe-Co-Nd-Dy-B Glassy Powders by Spark-Plasma Sintering and Magnetic Properties of the Consolidated Alloys
- Glass-Forming Ability, Crystallized Structure and Magnetic Properties of Fe_Co_Nd_3Dy_B_ Glassy Alloy with Large Supercooled Liquid Region
- Corrosion Behavior of Zr-(Nb-)Al-Ni-Cu Glassy Alloys
- Cutting Characteristics of Bulk Metallic Glass
- Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr_Al_Ni_5Cu_ Bulk Metallic Glass
- Effects of Size and Volume Fraction of Precipitated Crystalline Phase Induced by Friction Stir Processing on Hardness in Zr-Al-Ni-Cu Bulk Metallic Glass
- Hydrogen Sensors Using Pd-Based Metallic Glassy Alloys
- Analysis of 3D Random Al_B_4O_ Whisker Reinforced Mg Composite Using FEM and Random Sequential Adsorption
- Thermal, Mechanical and Physical Properties of Supercooled Liquid in Pd-Cu-Ni-P Amorphous Alloy
- High T_c Superconductivity of a Melt-Spun Er_1Ba_2Cu_3 Oxide Ribbon
- Development of W-Reinforced Zr-Based Metallic Glass
- Shape Memory Effect and Magnetostriction in Rapidly Solidified Fe-29.6at%Pd Alloy
- 金属液体の多段階粉砕技術の開発と急速凝固球状微細粉末の作製
- Preparation of Highly Active Methanol Steam Reforming Catalysts from Glassy Cu-Zr Alloys with Small Amount of Noble Metals
- Hydrogenation of Benzene over Catalyst Prepared from Amorphous Pt-Zr Alloy
- Microstructure of Bonding Interface for Resistance Welding of Zr-Based Metallic Glass Sheets
- The Effect of Cerium on Microstructures and Mechanical Properties of Mg-4Al-2Sn-1Ca Alloy
- Alloying Effect on the Hydrogen Sensing Property of Melt-Spun Mg_Pd_ Amorphous Alloy
- Viscous Flow Workability of Ni-Cr-P-B Metallic Glasses Produced by Melt-Spinning in Air
- Effect of Cold Drawing on Electrical and Mechanical Properties of Cu-5 at% Zr Alloy
- Crystallization Kinetics of Ti_Ni_Cu_ Melt-Spun Amorphous Ribbons
- Enganced Shot Peening Effect for Steels by Using Fe-based Glassy Alloy Shots
- Formation, Thermal Stability and Mechanical Properties of Aluminum-Based Glassy Alloys Containing Boron
- Thermal Stability and Mechanical Properties of Ti_Cu_Zr_TM_(TM = Co, Fe) Metallic Glass Sheets Prepared by Twin-Roller Casting Method
- Crystalline Texture and Magnetostriction in Rapid-Solidified Fe-Pd Alloy Ribbons
- Mechanical Properties and Electrical Conductivity of Heavily Cold-Rolled Cu_Zr_x Alloys (x=0-8)
- Thermal stability of Pd-based metallic glasses examined by electrical resistance measurement