Simple Fabrication of Metal-Based Piezoelectric MEMS by Direct Deposition of Pb(Zr, Ti)O-3 Thin Films on Titanium Substrates
スポンサーリンク
概要
- 論文の詳細を見る
Piezoelectric Pb(Zr, Ti)O3 (PZT) thin films were directly deposited on cantilever-shaped titanium substrates and evaluated for their piezoelectric properties and actuator performance. Because of the small difference in the thermal expansion coefficient between the PZT and the substrate, and the mitigation of the residual stress, large piezoelectric properties could be obtained for PZT/Ti unimorph actuators. X-ray diffraction measurements clearly revealed that the PZT thin films have a polycrystalline perovskite structure with a random orientation. Observations using a scanning electron microscope (SEM) demonstrated that PZT films, which were 3.8 mum thick, were densely deposited on Pt-coated Ti substrate without pores or cracks. The polarization-electric field (P- E) hysteresis of the PZT film clearly indicates ferroelectricity. The piezoelectric properties of the PZT films were evaluated from the tip displacement of PZT/Ti unimorph cantilevers. Simplified transverse piezoelectric coefficients (e31 * = d31/s11 E, where d31 and s11 E are piezoelectric coefficient and elastic compliance, respectively) were measured, which ranged from -3.6 to 4.3 C/m2 - about three times larger than those of the PZT thin films deposited on stainless-steel substrates. Measurement of resonant frequencies of the cantilevers shows a clear dependence on the cantilever length, which obeys the theoretical equation. This indicates that these cantilevers can be reliably applied as sensors and actuators in a resonance mode.
著者
-
Kotera H
Kyoto Univ. Kyoto Jpn
-
KOTERA Hidetoshi
Department of Mechanical Engineering, Kyoto University
-
Kotera Hidetoshi
Department of Micro Engineering, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto 606-8501, Japan
関連論文
- Simple Fabrication of Metal-Based Piezoelectric MEMS by Direct Deposition of Pb(Zr, Ti)O-3 Thin Films on Titanium Substrates
- Label-Free Immunosensing for α-Fetoprotein in Human Plasma using Surface Plasmon Resonance
- P-MCH-04 Piezoelectric micropumping system using PZT thin films(Micro/Nanomechatronics,Technical Program of Poster Session)
- P-MCH-03 LOCALIZED SUBSTANCE DELIVERY TO SINGLE CELL BY THREE DIMENTIONAL MICROFLUIDIC DEVICE(Micro/Nanomechatronics,Technical Program of Poster Session)
- MCH-02 DEVELOPMENT OF A TISSUE-LIKE CHIP TO EXCLUSIVELY STIMULATE SINGLE CELL AND DETECT ITS PHYSIOLOGICAL REACTION(Micro/Nanomechatronics I,Technical Program of Oral Presentations)
- MCH-01 DEVELOPMENT OF A NOVEL METHOD FOR STRETCHING DNA FIBERS ON MICROBRIDGES FABRICATED BY SINGLE-MASK INCLINED UV LITHOGRAPHY(Micro/Nanomechatronics I,Technical Program of Oral Presentations)
- 1P-309 電界集中を用いた高収率大量並列電気的細胞融合デバイスの開発(バイオエンジニアリング,第46回日本生物物理学会年会)
- Development of Compact and Precise Design Approach for Multiple Heated Materials with Thermal Design Parameter Optimization
- A STUDY OF CONSTITUTIVE BEHAVIOUR OF POWDER ASSEMBLY BY PARTICULATE MODELING
- Finite Element Analysis of Tape-Head Interface Phenomena of VCR
- Orientation Dependence of Transverse Piezoelectric Properties of Epitaxial BaTiO3 Films
- Multilayer Thin-Film Capacitor Fabricated by Radio-Frequency Magnetron Sputtering
- Orientation Dependence of Shear Mode Piezoelectric Properties of Epitaxial Pb(Zrx,Ti1-x)O3 Thin Films
- Modal Analysis for Externally Driven Micropump and Additional Mass Effect of Water
- Piezoelectric properties of microfabricated (K,Na)NbO3 thin films
- Effect of Actomyosin Contractility on Lamellipodial Protrusion Dynamics on a Micropatterned Substrate
- Human and mouse induced pluripotent stem cells are differentially reprogrammed in response to kinase inhibitors.
- Composition Dependence of Piezoelectric Properties of Pb(Zr,Ti)O3 Films Prepared by Combinatorial Sputtering
- Piezoelectric Properties of Epitaxial NaNbO3 Thin Films Deposited on (001)SrRuO3/Pt/MgO Substrates
- Electric Field-Induced Strain of PbZrO3 Films