高速炉蒸気発生器におけるナトリウム-水反応時の水側伝熱特性(<特集>第14回動力・エネルギー技術シンポジウム)

概要

論文の詳細を見る
Sodium reacts chemically with water in the case of the unexpected tube failure of a steam generator (SG) in a fast breeder reactor (FBR). It is integral in order to predict the event with high accuracy to understand the characteristics of heat transfer inside a tube in detail during the tube failure (sodium-water reaction). Experiments were performed using purified water under the following conditions; initial pressure of 11.2-13.4MPa, initial water temperature of 200deg C and water mass flux of 45.7-3630kg/(m^2s). A test tube was heated rapidly by high frequency induction current. The time averaged heat flux was estimated using an inverse solution from the measured temperatures at two points on three different locations along the tube. It was confirmed that the derived values agreed with measured heat fluxes on the outer surface within 20% accuracy. It was found that the characteristics of the heat transfer strongly depended on the flow rate. The heat transfer on the wall changed from nucleate boiling to transient-film boiling during increasing the heat flux and returned to the nucleate boiling during decreasing the heat input. A counterclockwise cycle always appeared in the transition boiling region, where the nucleate and film boiling coexisted and the area ratio of these varied with time. The adequacy of heat transfer correlations to evaluate tube overheating were confirmed.
2010-03-25