連結管を持つ二相熱サイフォンの熱輸送限界 : 加熱面温度変動と流動特性(熱工学,内燃機関,動力など)

概要

論文の詳細を見る
An experiment of heat transfer characteristics in a two-phase thermosyphon with an adiabatic connecting pipe of inner diameter D_p=2 to 8 mm and of length L=250, 500 and 1 000 mm has been carried out at atmospheric pressure employing water as an operating substance. As the heat is loaded into the thermosyphon, the temperature of heated surface starts fluctuating at a heat flux at which unstable vapor-liquid counter current flow, is generated in the connecting pipe. A feature of bubbles at the upper end of the connecting pipe was photographed when the temperature fluctuation starts. It was found that the heat flux at the onset of the temperature fluctuation is increase with an increase in D_p and then can be predicted well by the Wallis equation with C_w=0.7 for 5≦D_p≦8 mm. Furthermore, we clarified that the cause of this fluctuation comes from the inlet effect of the connecting pipe using a bell mouth, which is placed to either bottom end or both ends of the connecting pipe.
社団法人日本機械学会の論文
2007-02-25