Bonding Strength of Resin Cement to Silicate Glass Ceramics for Dental CAD/CAM Systems is Enhanced by Combination Treatment of the Bonding Surface
スポンサーリンク
概要
- 論文の詳細を見る
To increase the bond strength of CAD/CAM-fabricated, leucite-reinforced glass ceramics with a resin cement, the effects of the following were investigated : surface modification by tribochemical (TBC) treatment, followed by combined application of a silane coupling agent and a functional monomer as a primer. Bond strength was evaluated by a shear bond test. It was found that a silane coupling agent was useful for all the surfaces, particularly for the TBC-treated surface. This was because of the presence of a silica layer on the modified surface. The combination of a silane coupling agent and a functional monomer on the TBC surface allowed marked improvement in bonding, whereby the bonding endured 20, 000 cycles of thermal cycling. Therefore, TBC treatment in combination with a silane coupling agent and a functional monomer as a primer substantially increased the bond strength of CAD/CAM-fabricated glass ceramics with resin cement, if the treatment conditions were appropriate.
- 日本歯科理工学会の論文
著者
-
FUJISHIMA Akihiro
Department of Oral Biomaterials and Technology, School of Dentistry, Showa University
-
HOTTA Yasuhiro
Department of Oral Biomaterials and Technology, School of Dentistry, Showa University
-
MIYAZAKI Takashi
Department of Oral Biomaterials and Technology, School of Dentistry, Showa University
-
KUNII Jun
Department of Oral Biomaterials and Technology, Showa University School of Dentistry
-
Miyazaki Takashi
Department Of Oral Biomaterials & Technology Showa University School Of Dentistry
-
Miyazaki Takashi
Department Of Oral Biomaterials And Technology Showa University School Of Dentistry
-
Kunii Jun
Department Of Oral Biomaterials And Technology Showa University School Of Dentistry
-
Fujishima Akihiro
Department Of Oral Biomaterials And Technology School Of Dentistry Showa University
-
Hotta Yasuhiro
Department Of Oral Biomaterials & Technology Showa University School Of Dentistry
-
SHIMAKURA Yusuke
Department of Prosthodontics, Showa University School of Dentistry
-
KAWAWA Tadaharu
Department of Prosthodontics, Showa University School of Dentistry
-
Hotta Yasuhiro
昭和大学 歯学部歯科理工学教室
-
Miyazaki Takashi
Showa Univ. School Of Dentistry Tokyo Jpn
-
Miyazaki Takashi
昭和大学 歯学部
-
Fujishima Akihiro
Showa Univ. School Of Dentistry Tokyo Jpn
-
Masuda T
Department Of Oral Biomaterials & Technology Showa University School Of Dentistry
-
Kawawa Tadaharu
Department Of Prosthodontics Showa University School Of Dentistry
-
Miyazaki Takashi
Department Of Endocrinology And Metabolism Division Of Molecular Adaptation Research Institute Of En
-
Shimakura Yusuke
Department Of Prosthodontics Showa University School Of Dentistry
-
Miyazaki Takashi
Department Of Animal Science Faculty Of Bioresources Mie University
-
KAWAWA Tadaharu
Department of Prosthodontics
関連論文
- Radiofrequency Energy Induced Ventricular Fibrillation in a Case of Idiopathic Premature Ventricular Contraction Originating from the Left Ventricular Papillary Muscle
- Combination treatment of tribochemical treatment and phosphoric acid ester monomer of zirconia ceramics enhances the bonding durability of resin-based luting cements
- An evaluation of the bending properties of glass fiber reinforced plastic post materials by a cantilever test
- MPN-PCR法により測定した市販魚介類中の腸炎ビブリオおよび耐熱性溶血毒遺伝子陽性菌数
- Combination treatment of tribochemical treatment and phosphoric acid ester monomer of zirconia ceramics enhances the bonding durability of resin-based luting cements
- An Evaluation of the Bending Properties of Glass Fiber Reinforced Plastic Post Materials by a Cantilever Test
- CAD/CAM All Ceramic Dental Restorations on Implants : A Panacea or a Challenge?
- The relationships between stature, fat-free mass index, and fat mass index at before and after BMI-rebound in children
- Efficacy of experimental dual-cure resin cement for orthodontic direct bond system
- Properties of a gypsum-bonded magnesia investment using a K_2SO_4 solution for titanium casting
- A Gypsum-Bonded Magnesia Investment is Available for Titanium Casting
- Titanium casting using Magnesia-based Gypsum-bonded investment : Part 1. Basic properties of investment
- Fundamental Studies on Ammonia-free Phosphate-bonded Binder for Dental Investments
- The Possibility of Fabricating Co-Cr Casting Plates by Using a Heat-Shock Method with Conventional Phosphate-Bonded Investments
- Two-stage Heat-Shock Procedure Can Fabricate Sound Co-Cr Casting Denture Plates by Using Conventional Phosphate-Bonded Investments
- Nanoscale Electrical Properties of Molecular Films in the Vicinity of Platinum Ultrathin Film Electrode
- Fabrication of Nanogap Electrodes Using Ultrathin Metal Film
- Fabrication of Nanometer-Scale Pattern Using Current-Controlled Scanning Probe Lithography
- Fabrication of a Nanogap on a Metal Nanowire Using Scanning Probe Lithography
- Tail-suspension Induces Altered Expression of GAPDH and ZAKI-4β mRNAs in Rat Hindlimbs : Implication for Disuse Muscle Atrophy
- Experimental Binder-free Investments Reused to Cast Dental Precious Alloys
- Effect of Varying HAP/TCP Ratios in Tape-cast Biphasic Calcium Phosphate Ceramics on Response in vitro
- Heat curing of UTMA-based hybrid resin : effects on the degree of conversion and cytotoxicity
- Experimental Paste-paste Type Phosphate-bonded Investment with Colloidal Silica Solution
- A review of dental CAD/CAM : current status and future perspectives from 20 years of experience
- Predicting Treatment Outcome in Patient with TMD with/without Disc Reduction
- Effect of Sintering on the Marginal and Internal Fit of CAD/CAM-fabricated Zirconia Frameworks
- Bonding Strength of Resin Cement to Silicate Glass Ceramics for Dental CAD/CAM Systems is Enhanced by Combination Treatment of the Bonding Surface
- Current Status and Future Prospects of a Dental CAD/CAM System Used in Crown-bridge Restorations
- Fracture Toughness Measurement of Dental Ceramics Using the Indentation Fracture Method with Different Formulas
- Recycling of Used Commercial Phosphate-bonded Investments with Additional Mono-ammonium Phosphate
- Machining Accuracy of CAD/CAM Ceramic Crowns Fabricated with Repeated Machining Using the Same Diamond Bur
- Durability of Tungsten Carbide Burs for the Fabrication of Titanium Crowns using Dental CAD/CAM
- Characterization of InGaAs Phosphidized by a Plasma Process
- Effects of Dental Adhesive Cement and Surface Treatment on Bond Strength and Leakage of Zirconium Oxide Ceramics
- Measurement of the Degree of Cure for Resin-Modified Glass Ionomer Cements by IR Spectroscopic Analysis
- Durability of Resin-Modified Glass Ionomer Cements after Long Term Water Immersion
- Resin Content in Cement Liquids of Resin-Modified Glass Ionomers
- Dentinal Tubule Densities in Human and Bovine Coronal Dentin
- Chemical Analysis of Coronal and Radicular Dentin using Fourier Transform Infrared Spectroscopy
- Comparison of nanohardness between coronal and radicular intertubular dentin
- "Field study of Alkaline plutons in Tamil Nadu and Andhra Pradesh, south India, 1997-1998"
- Durability of Diamond Burs for the Fabrication of Ceramic Crowns Using Dental CAD/CAM
- The mechanical properties of dental thermoplastic materials in a simulated intraoral environment
- Calcineurin-mediated Regulation of ZAKI-4 Gene Expression in Osteoblast-like ROS17/2.8 Cells
- Direct Resorption of Calcified Cartilage by Macrophages during Primary Bone Marrow Cavity Formation
- STRUCTURE AND DEVELOPMENTAL EXPRESSION PROFILES OF CHICKEN GHRELIN GENE
- IB-19 The changes of intercellular gap junction in rat parotid gland by clipping and reopening of parotid duct(THE 46TH ANNUAL MEETING OF THE JAPAN SOCIETY OF HISTOCHEMISTRY AND CYTOCHEMISTRY)
- Factors Affecting the Bonding of Silicoater MD System for Resin Veneering to Cp Titanium
- Comparison of the Clinical Features of TMD Patients and their Treatment Outcomes between Prosthodontic and TMD Clinics
- A Fully Photoreversible Supramolecular Polymer Having a Diarylethene Photoswitch
- Experimental Ammonia-free Phosphate-bonded Investments Using Mg(H_2PO_4)_2
- Labor Reduction for Mold Preparation of a Commercial Titanium Cast Denture System Using a Heat-shock Method
- Altered bone turnover in chlorpromazine-challenged rats and its effect on 1α-hydroxyvitamin D_3 administration in vivo
- Non-Kramer's Doublet Ground State in PrPtBi
- 魚介類中の腸炎ビブリオ定量のためのMPN-PCR法の評価
- Total Body Composition in Children
- Vibrio Vulnificus-necrotizing Fasciitisin Patient with Cirrhosis
- Micro-CT Based Quantitative Evaluation of In Vivo Bone Regeneration with Collagen-based Biomaterials
- Investigation of the sol-gel process with experimental paste-type dental phosphate-bonded investments
- Effects of ovariectomy on bone morphology in maxillae of mature rats
- MOLECULAR CHARACTERIZATION OF CHICKEN GROWTH HORMONE SECRETAGOGUE RECEPTOR
- Plasma interleukin-8 levels are increased by hemodialysis using regenerated cellulose.
- Tensile Strength and Durability of Bovine Dentin
- Serous cystadenocarcinoma of the pancreas with liver metastases
- Resistance to Cyclic Fatigue and Fracture of Structurally Compromised Root Restored with Different Post and Core Restorations
- Gene Expression of Periodontal Ligament Cells in Controlled Freezing Point Storage (CFPS) and Cryopreservation
- Change in Estrogen Receptor Gene Expression of Oral Mucous Epithelial Cells with Estrogenic Endocrine-disrupting Chemical Treatment
- Spatial Expression of ZAKI-4 mRNA in Rat Brain
- Tissue Distribution of Novel Thyroid Hormone-Responsive Gene, ZAKI-4, in the Rat and Its Ontogenic Expression in the Brain
- Novel fabrication method for zirconia restorations : Bonding strength of machinable ceramic to zirconia with resin cements
- Colloidal β-Tricalcium Phosphate Prepared by Discharge in a Modified Body Fluid Facilitates Synthesis of Collagen Composites
- Investigation of the Sol-Gel Process with Experimental Paste-Type Dental Phosphate-bonded Investments
- Soda-lime glass as a binder in reusable experimental investment for dental castings
- Effects of pre-meal versus post-meal administration of miglitol on plasma glucagon-like peptide-1 and glucose-dependent insulinotropic polypeptide levels in healthy men
- A Note on Leaf Reduction Theorem for Reversal and Leaf-Bounded Alternating Turing Machines
- Micro-CT evaluation of in vivo osteogenesis at implants processed by wire-type electric discharge machining
- Effects of miglitol, sitagliptin or their combination on plasma glucose, insulin and incretin levels in non-diabetic men
- Fatigue and Fracture Observations of Radicular Dentin
- Enhanced osteoblast response to electrical discharge machining surface
- Relation between incremental lines and tensile strength of coronal dentin
- Production of a calcium silicate cement material from alginate impression material
- Effects of a convenient silica-coating treatment on shear bond strengths of porcelain veneers on zirconia-based ceramics
- Properties of experimental titanium cast investment mixing with water reducing agent solution
- Fabrication of a Nanogap on a Metal Nanowire Using Scanning Probe Lithography
- Nanoscale Electrical Properties of Molecular Films in the Vicinity of Platinum Ultrathin Film Electrode
- One-bottle silane coupling agent containing 4-META
- A Resected Case of Pancreatic Metastasis from Primary Renal Cell Carcinoma.
- Pseudomyxoma Peritonei. A Report of Three Cases and a Review of Published Reports.:A Report of Three Cases and a Review of Published Reports
- Nonfunctioning Islet Cell Carcinoma. A Twenty-One Years Survival Case after Distal Pancreatectomy.:A Twenty-One Years Survival Case after Distal Pancreatectomy
- Fabrication of Nanogap Electrodes Using Ultrathin Metal Film
- Jejunal Varices as a Cause of Massive Gastrointestinal Bleeding. A Case Report.:A Case Report
- One-bottle silane coupling agent containing 4-META