円弧型エアロトレイン翼の地面効果特性(流体工学,流体機械)

概要

論文の詳細を見る
In this paper, the aerodynamic characteristics of a symmetrical ground effect wing are measured in a low turbulance wind tunnel. To change the directions of an Aero-Train in practical use, it must shuttle back and forth. Circular-arc aerofoil seems to be suitable for the Aero-train, while it can run back and forth by changing only the attack angle of wings. Lift and drag characteristics of NACA 6412-modified, circular-arc aerofoils with thickness ratio 9% and 12% were clarified by the 6-component balance. Suction and moving-belt system were used to simulate the ground. Characteristics of two-dimensional aerofoils and three-dimensional wings were compared, and lift-to-drag rations of three aerofoils were compared. Separations on the upper surface of the circular-arc aerofoils were visualized by tuft and oil spot method. It was found that increase of drag in ground effect condition was caused by increase of the induced drag and by enlargement of the separation area on upper surface of circular-arc aerofoils. A circular-arc aerofoil with thickness ratio 9% at the angle of attuck 2 degrees had enough lift-to-drag ratio for Aero-Train.
2004-05-25